Nutone NP60000 - Manual - manualsarea.com

Page 3 - TABLE OF CONTENTS; WARRANTY; NUTONE ONE-YEAR LIMITED WARRANTY

- 3 - TABLE OF CONTENTS 1. S ELECT B LOWER O PTION AND I NSTALL D UCTWORK ............................................................................6 2. M EASURE I NSTALLATION ...................................................................................................................7 3. P ...

Page 4 - RMP SERIES BACKSPLASH; SERIES HOOD; INTERIOR BLOWERS

HL0075 - 4 - RMP SERIES BACKSPLASH (Stainless steel wall covering with warming shelves. Optional) Model 415 (7” round adjustable elbow) Model 427 (4 1 / 2 ” x 18 1 / 2 ” to 10” round, 6” high - lateral Model 423 (4 1 / 2 ” x 18 1 / 2 ” to 10” round - vertical Model 424 (4 1 / 2 ” x 18 1 / 2 ” to 10”...

Page 5 - IN-LINE AND EXTERIOR BLOWERS

- 5 - HL0076 RMP SERIES BACKSPLASH (Stainless steel wall covering with warming shelves. Optional.) - NP60000 SERIES RANGE HOOD SYSTEM - IN-LINE AND EXTERIOR BLOWERS 332KR in-line and exterior blowerrough-in kit - Purchase separately. Model 418 10” round adjustable elbow (optional) Model HLB3 (280 cf...

Page 6 - SELECT BLOWER OPTION AND INSTALL DUCTWORK; 0” round duct

- 6 - 1. SELECT BLOWER OPTION AND INSTALL DUCTWORK Either an interior or exterior blower or in-line blower may be used with this hood. The NuTone Premier 60000 Series mustbe installed with blower models RM325H, RM326H, HLB3, HLB6, HLB9, HLB11, 331H, 332H, 335 or 336 only. Other blowers cannot be sub...

Page 7 - PREPARE THE INSTALLATION; INSTALLATION WITH STANDARD 18’’

Remove the installation kit from inside the hood.Make sure that the following items are included: - Wood strip - Installation manual - Accessories including: • Filters (Quantity varies depending on range hood width)• Bag of parts including: (4) flat head screws #10-2’’, (8) screws #8 x 3 ⁄ 4 ’’, (4)...

Page 8 - INSTALL WOOD MOUNTING STRIP; CAUTION; RMP Series

Model 423, 424, 427 453, or 454 Attach transition (if required) to blower rough-in plate.Use duct tape to make all joints secure and air-tight.NOTE: Model RM325H blower plate connects directly to 7’’ round ductwork without a transition. - 8 - 5. INSTALL WOOD MOUNTING STRIP Measure and mark a level l...

Page 9 - INSTALL THE OPTIONAL SOFFIT CHIMNEY; RMN Series; WARNING

- 9 - 9. INSTALL THE ROUGH-IN PLATE TO THE HOOD (ALL BLOWERS) Run power cable to installation location. Refer to the instructions includedwith the selected blower or rough-in kit (sold separately) for details oninstalling the rough-in plate. Install the rough-in plate so that the wiringbox is locate...

Page 10 - INSTALL LIGHT BULBS AND WARMING LAMPS; Baffle Filters

- 10 - 13. INSTALL LIGHT BULBS AND WARMING LAMPS Install (2) heat lamp bulbs. Use BR40 size, 250 W max., infrared bulbs only (sold separately). Install (3) halogen light bulbs. Use PAR20 size, 50 W (sold separately). 14. INSTALL FILTERS It is recommended to install side filters first and finish with...

Page 11 - HEAT SENTRYTM; The HEAT SENTRY; can start the blower even if

- 11 - 15. USE AND CARE Grease Filters The grease filters should be cleaned frequently. Use awarm detergent solution. Grease filters are dishwashersafe. Wash more often if your cooking style generatesgreater grease—like frying foods or wok cooking.Remove filters by pushing filters towards the back o...

Nutone NP60000 - Manual

Table of Contents:

Summary

Other Nutone Models