Nutone 758NT - Manual

NuTone, Inc.,

4820 Red Bank Road, Cincinnati, OH 45227 (1-888-543-8687)

REFERENCE

QTY.

REMARKS

Project

Location

Architect

Engineer

Contractor

Submitted by

Date

60K

99043981A

DESCRIPTION

LIGHT FIXTURE:
• Corrosion resistant, painted white finish
• Frosted glass shade
• Close mount design
• Uses two 60 Watt maximum, candelabra base bulbs.

Bulbs not included.

• Vent openings in fixture base for exhaust fan
• Light fixture assembly is plug-in and removable
BLOWER:
• Plug-in permanently lubricated motor
• Polymeric blower wheel
HOUSING:
• Rugged, 26-gage galvanized steel construction
• Sturdy key-holed mounting brackets for quick, accurate

installation

• Tapered, polymeric duct fitting with built-in backdraft

damper for easy, positive duct connection and no metallic

clatter

NOTE: For installation in flat ceilings only.
U.L. Listed for use in insulated ceilings (Type I.C.)
Use supply wiring rated for at least 90° C

SPECIFICATIONS

VOLTS AMPS CFM SONES

DUCT

120

2.2

70

3.5

4" Round

INSTALLATION

Complete installation instructions are included with each
Decorative Light / Fan.

ARCHITECT'S SPECIFICATION

• Decorative Light/Fan unit shall be NuTone Model 758.
• Unit shall have galvanized steel housing with dual integral

mounting brackets. It shall be ducted to a roof or wall cap.

• Blower assembly shall be removable and have a permanently

lubricated motor.

• Light fixture assembly shall be plug-in, removable and include a

frosted glass shade and a corrosion-resistant base with painted

white finish.

• Lamps shall be two 60 Watt maximum, candelabra base,

incandescent.

• Air delivery to be no less than 70 cfm and sound level no greater

than 3.5 sones. Air and sound ratings shall be certified by HVI.

• Unit shall be U.L. Listed for use in insulated ceilings (Type I.C.)

Architectural & Engineering Specifications

October 2006

Decorative

Light / Fan

MODEL 758NT

HVI-2100 CERTIFIED RATINGS comply with
new testing technologies and procedures
prescribed by the Home Ventilating Institute,
for off-the-shelf products, as they are available
to consumers. Product performance is rated at
0.1 in. static pressure, based on tests conducted
in AMCA’s state-of-the-art test laboratory.
Sones are a measure of humanly-perceived
loudness, based on laboratory measurements.