Nutone 754SNNT - Manual

Nutone 754SNNT

Nutone 754SNNT – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
Page: / 1
Loading the manual

NuTone, Inc.,

4820 Red Bank Road, Cincinnati, OH 45227 (1-888-543-8687)

REFERENCE

QTY.

REMARKS

Project

Location

Architect

Engineer

Contractor

Submitted by

Date

60K

99043980A

DESCRIPTION

LIGHT FIXTURE:
• Corrosion resistant finish
• Oil-rubbed bronze finish (Model 754RBNT)
• Satin nickel finish (Model 754SNNT)
• Frosted glass shade
• Close mount design
• Uses two 60 Watt maximum, candelabra base bulbs.

Bulbs not included.

• Vent openings in fixture base for exhaust fan
• Light fixture assembly is plug-in and removable
BLOWER:
• Plug-in permanently lubricated motor
• Polymeric blower wheel
HOUSING:
• Rugged, 26-gage galvanized steel construction
• Sturdy key-holed mounting brackets for quick, accurate

installation

• Tapered, polymeric duct fitting with built-in backdraft

damper for easy, positive duct connection and no metallic

clatter

NOTE: For installation in flat ceilings only.
U.L. Listed for use in insulated ceilings (Type I.C.)
Use supply wiring rated for at least 90° C

SPECIFICATIONS

VOLTS AMPS CFM SONES

DUCT

120

2.2

70

3.5

4" Round

INSTALLATION

Complete installation instructions are included with each
Decorative Light / Fan.

ARCHITECT'S SPECIFICATION

• Decorative Light/Fan unit shall be NuTone Model 754RBNT

(754SNNT).

• Unit shall have galvanized steel housing with dual integral

mounting brackets. It shall be ducted to a roof or wall cap.

• Blower assembly shall be removable and have a permanently

lubricated motor.

• Light fixture assembly shall be plug-in, removable and include a

frosted glass shade and a corrosion-resistant base with oil-

rubbed bronze finish (Model 754RB) or satin nickel finish (Model

754SN).

• Lamps shall be two 60 Watt maximum, candelabra base,

incandescent.

• Air delivery to be no less than 70 cfm and sound level no greater

than 3.5 sones. Air and sound ratings shall be certified by HVI.

• Unit shall be U.L. Listed for use in insulated ceilings (Type I.C.)

Architectural & Engineering Specifications

October 2006

Decorative

Light / Fan

MODELS 754RBNT & 754SNNT

HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed by
the Home Ventilating Institute, for off-the-shelf
products, as they are available to consumers.
Product performance is rated at 0.1 in. static
pressure, based on tests conducted in AMCA’s
state-of-the-art test laboratory. Sones are a
measure of humanly-perceived loudness, based
on laboratory measurements.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Nutone Models