Nutone 742SNNT - Manual

NuTone, Inc.,

4820 Red Bank Road, Cincinnati, OH 45227 (1-888-543-8687)

REFERENCE

QTY.

REMARKS

Project

Location

Architect

Engineer

Contractor

Submitted by

Date

Architectural & Engineering Specifications

July 2005

Decorative

Light / Fans

MODELS 742SNNT

742WHNT

742RBNT

ARCHITECT’S SPECIFICATION

• Decorative Light / Fan shall be NuTone Model 742SNNT

(742WHNT), (742RBNT) as manufactured by NuTone according
to specifications listed:

• Unit shall have galvanized steel housing with dual integral

mounting brackets. It shall be ducted to a roof or wall cap.

• Blower assembly shall be removable and have a permanently

lubricated motor.

• Light fixture assembly shall be plug-in, removable and include a

frosted melon glass shade and a corrosion-resistant base with
satin nickel (Model 742SNNT), or painted white (Model 742WHNT)
finish, or oil-rubbed bronze finish (Model 742RBNT).

• Lamps shall be two 60 Watt maximum, type A, medium base,

incandescent.

• Air delivery to be no less than 70 cfm and sound level no greater

than 2.0 sones. Air and sound ratings shall be certified by HVI.

• Unit shall be U.L. Listed for use in insulated ceilings (Type I.C.)

50G

99043343B

SPECIFICATIONS

HVI-2100 CERTIFIED
RATINGS comply with new
testing technologies and
procedures prescribed by

the Home Ventilating
Institute, for off-the-shelf
products, as they are
available to consumers.

Product performance is rated at 0.1 in. static
pressure, based on tests conducted in AMCA’s
state-of-the-art test laboratory. Sones are a measure
of humanly-perceived loudness, based on laboratory
measurements.

DESCRIPTION

LIGHT FIXTURE:
• Corrosion resistant finish

Satin nickel finish (Model 742SNNT)
Painted white finish (Model 742WHNT)
Oil-rubbed bronze finish (Model 742RBNT)

• Frosted melon glass shade
• Close mount design
• Uses two 60 Watt maximum, type A, medium base bulbs. Bulbs

not included.

• Vent openings in fixture base for exhaust fan
• Light fixture assembly is plug-in and removable
BLOWER:
• Plug-in permanently lubricated motor
• Polymeric blower wheel
HOUSING:
• Rugged, 26-gage galvanized steel construction
• Sturdy key-holed mounting brackets for quick, accurate installation
• Tapered, polymeric duct fitting with built-in backdraft damper for

easy, positive duct connection and no metallic clatter

NOTE: For installation in ceilings up to 12/12 pitch.
U.L. Listed for use in insulated ceilings (Type I.C.)
Use supply wiring rated for at least 90° C

VOLTS

AMPS

CFM

SONES

DUCT

120

1.6

7 0

2.0

4" Round

INSTALLATION

Complete installation instructions are
included with each Decorative Light / Fan.