Page 2 - Easy Installation
Easy Installation Our products are designed to make your life easier, so installing this child restraint doesn't require outside assistance. While we encourage the use of Certified Child Passenger Safety Technicians to ensure you have installed the seat correctly, you can install the child restraint...
Page 3 - Contents; KEEP THESE; READ CAREFULLY
2 PIPA lite series instructions 3 PIPA lite series instructions Contents Product Information Product Registration 4 Recall Information 4 Warranty 5Contact 5 Child Usage Requirements 5 Warnings 6 Car Seat Use after a Crash 10 Vehicle Compatibility 11 Infant Car Seat Parts List 14 Base Parts List 16 P...
Page 4 - Product Information; Recall Information; Contact; Child Usage Requirements
4 PIPA lite series instructions 5 PIPA lite series instructions Product Information Model Number: _____________________________________________________________________________________________ Manufactured in (date): ______________________________________________________________________ Product Regis...
Page 5 - WARNING
6 PIPA lite series instructions 7 PIPA lite series instructions WARNING Failure to follow these warnings, instructions and labels on the child restraint could result in serious injury or death. A child’s safety is your responsibility. NEVER leave your child unattended. Read all instructions before u...
Page 7 - Car Seat Use after a Crash; ALL of the following; Vehicle Compatibility
Car Seat Use after a Crash The National Highway Traffic Safety Administration (NHTSA) recommends that car seats be replaced following a moderate or severe crash. Car seats do not automatically need to be replaced following a minor crash.What defines a minor crash?A minor crash is one in which ALL of...
Page 9 - Infant Car Seat Parts List
14 PIPA lite series instructions 15 PIPA lite series instructions Infant Car Seat Parts List Make sure all parts are available before assembly. If any part is missing, please contact Nuna (see page 4 for information). No tools are required for assembly. 1 Canopy 2 Seat Pad 3 Body Support (x2) 4 Ches...
Page 10 - Base Parts List
16 PIPA lite series instructions 17 PIPA lite series instructions Base Parts List Make sure all parts are available before assembly. If any part is missing, please contact Nuna (see page 4 for information). No tools are required for assembly. 1 Vehicle Belt Lock Off 2 Rigid LATCH (lower attachments)...
Page 11 - Product Overview; Canopy Drape
Product Overview Canopy1 - To attach the canopy, snap the canopy to the canopy mount on both sides. To open the canopy, pull the canopy toward the front of the seat, and to close the canopy, push it back. 2 - To remove the canopy, reverse step 1. Then unsnap the seat pad from the shell and lift fabr...
Page 13 - Head and Body Support
Head and Body Support The head and body supports can be used as necessary, to provide a snug fit for small babies. The head support straps cannot go through the same slots as the harness and should only be used in the top two harness slot positions. 1 - To remove the head support, unfasten the hook ...
Page 16 - Product Use
Product Use Securing Child in Child Restraint1 - Loosen harness by pressing the harness adjustment button (1) while pulling on the harness straps (2) . The harness adjustment button is located inside the slot on the seat pad. 2 - Press chest clip button to release the buckles (1) . Separate chest cl...
Page 17 - Check that Child is Secure
1 - Snap the chest clip together and temporarily slide towards buckle for tightening of harness. 2 - Tighten harness by pulling on the harness adjustment strap. Pull any excess harness webbing through the buckle towards the child’s shoulder and pull on the harness adjustment strap. This may need to ...
Page 18 - Installation; Installation in an Aircraft; Installation on a Stroller
Installation 1 - WARNING Serious injury or death can occur. The seat alone cannot be installed in the vehicle. It must be installed with the base. Installation in an Aircraft When used with the base, This Restraint is Certified for Use in Motor Vehicles and Aircraft. Install the base on an aircraft ...
Page 19 - Check the installation
1 - Rotate rigid LATCH (lower attachments) down. 2 - Hook rigid LATCH onto vehicle LATCH lower anchor bars. 3 - Confirm proper installation by pulling on the base AND also seeing that green is indicated on the connectors. The rigid LATCH (lower attachments) must be attached and locked onto the vehic...
Page 21 - Installation Using Lap and
Installation Using Lap and Lap/Shoulder Belt1 - Place vehicle in park and on level ground. 2 - Position base in a forward facing vehicle seat. Adjust base so bubble touches line. 3 - If necessary, use recline adjustment to position bubble in level indicator to achieve correct angle for installation....
Page 24 - Stability Leg
1 2 3 4 5 45 PIPA lite series instructions 44 PIPA lite series instructions Stability Leg Refer to vehicle owner’s manual to determine if stability leg can be used over a vehicle storage compartment. 1 - Unfold the stability leg from the stability leg storage. 2 - After correctly installing the base...
Page 25 - Accessories; PIPA series adapters
1 2 3 47 PIPA lite series instructions 46 PIPA lite series instructions Accessories Not all accessories are included on some models. PIPA series organic cotton insert1 - The PIPA lite series include an additional organic cotton insert with the same features as the on-product head and body support. S...
Page 26 - Cleaning and Maintenance
48 PIPA lite series instructions Cleaning and Maintenance Refer to the care label attached to the soft goods for washing and drying instructions. DO NOT attempt to remove the foam under the seat pad.Use only mild detergent, water and a soft cloth to clean the infant carrier shell, handle and harness...
