Page 2 - Contents
GB 3 Contents FOR YOUR SAFET Y 4 Rear panel 4 Front panel 5 INST ALLAT ION OF T HE MEDIAMAST ER 5 Connecting the Mediamaster to the satellite dish 6 Connecting the Mediamaster to a TV set 6 Connecting to a TV and a video recorder 7 If your VCR does not have a SCART- Connector 7 Connecting to an anal...
Page 3 - FOR YOUR SAFETY
GB 4 Keep a clear space around the Mediamaster to allow for sufficient ventilation. Do not cover the Mediamaster or place it on a unit that emits heat. !" Use a soft cloth and a mild solution of dish washing liquid to clean the casing. !" Never allo w liqui ds, spray or other materials to co...
Page 4 - Front panel
GB 5 The box for your Mediamaster should contain the following items: Mediamaster 9650S includes About the SCART sockets !" The rear panel of the Mediamaster is equipped with 2 SCART sockets. When you connect other products to any of these sockets, alw ays use fully featured SCART cables (as sup...
Page 5 - Connecting the Mediamaster to the satellite dish
GB 6 Installing the satellite dish !" Your satellite dish should be installed with a cable for you to connect to the Mediamaster. If you do not have this cable you will need to buy one from a dealer (tell the dealer you need a coaxial cable and F-connectors). !" Connect the cable from the sa...
Page 6 - Connecting to a TV and a Video recorder
GB 7 Refer to your video recorder manual for full instructio ns. !" Connect one SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster. !" Connect another SCART cable between the VCR and the VCR SCART socket on the Mediamaster. !" Connect the RF ca...
Page 8 - The CA module with Smartcard; About the Smart Card and CA Module.
GB 9 To be able to receive scrambled digital satellite channels you wi ll need a Common Interface CA (Conditional Access) module and a smartcard from a Service Provider. It is possible to use two CA modules. The Service Provider is the programme distributor. If you are subscribing to services from m...
Page 9 - REMOTE CONTROL
GB 10 This section describes ho w to operate the Mediamaster usi ng the buttons o n the remote control. Some of the functions can also be carried out using the buttons on the front panel. To switch the Mediamaster in and out of standby mode. EXIT T V To return to the viewing mode from a menu without...
Page 11 - Installation; The Welcome Menu
GB 12 To install the Mediamaster properly you have to adjust a few settings. You will always be guided by the information at the bottom of the menus. When you have finished the final part of the setup procedure you can start watching TV channels and listening to radio channels. Now you should have t...
Page 12 - Automatic Channel Search
GB 13 Satellite name: From here you can select a name for the configuration. Sw itch T ype: There are in principle two kinds of external DiSEqC switches on the market at present. One for connection of two LNBs. The other one for connection of up to 4 LNBs. If you have the other switch, defined as Di...
Page 14 - TV Screen Format
GB 15 If you have a TV set with a 4:3 picture format, and the transmission is in 16:9, you can select “ 4:3 (Pan & Scan) ” or “ 4:3 (Letterbox) ” to change display format. “ 4:3 (Pan & Scan) ” will fill up the screen vertically, but cut off some information from the left and right sides of t...
Page 18 - OK; Rearrange List
GB 19 If you have created several Favorite lists you can determine the sequence in which the lists will appear. To rearrange channels, select the list which you want to move using the OK button. Move the channels to the desired position using the UP/DOWN button and press OK. You can change the list ...
Page 20 - Language Settings
GB 21 Change access code From here you can change the access code from the standard 1234. DO NOT FORGET IT ! Without it you do not have access to any of the functions w here the code is required! If you forget it, you have to contact an Authorized Nokia Service Center to get help. From here you can ...
Page 21 - GAME
GB 22 You can enjoy this On/Off Timer for such a convenience as wake-up or automatic VCR recording. Mediamaster will be automatically switched-on and play specified channel for the specified time, and then switched-off. You may specify up to 8 separate lists with turn-on time, date, duration, channe...
Page 22 - INSTALLATION SUBMENUS
GB 23 Select this Menu from the line “Installation” in the Main Menu. The submenu will give you the opportunity to change the preferences performed during first time installation. You can also add features that were not included in the first installation. Please note that helpful information for eve...
Page 23 - Reinstall
GB 24 This will start the Installation procedure from the “Welcome Menu”. When you press OK in the “ Welcome Menu ” again, be aw are of the fact, that all previous channels and settings w ill be erased! T o exit the ” Reinstall ” menu w ithout erasing any channels, press “ Back ” . This gives genera...
Page 24 - GLOSSARY OF TERMS
GB 25 ACCESS code Personal Identification Number. A four -digit code stored in the memory. You can change ACCESS code on the “User Preference” Menu. AGC Acquisition Gain Control. Audio system With digital satellite reception, the sound is transmitted in packages and is elected either in a special au...
Page 25 - PROBLEM SOLVING
GB 26 Problem Possible causes What to do The display on the front panel does not light up/is not lit. Mains lead is not connected. Check that the mains lead is plugged into the power socket. No sound or picture. The satellite dish is not pointing at the satellite. No signal or weak signal. The LNB i...
Page 26 - TECHNICAL SPECIFICATION
GB 27 T ransmission Standards DVB,MPEG2 LNB/T uner input Connector 2 x F-type (Loop Through) Input frequency 950-2150MHz Max Current 500mA max Supply Voltage 13V/18V DiSEqC 1.0 RF Impedance 75 ohm Demodulator QPSK Symbol rate 2-45 Msym/s SCPC and MCPC Video decoder MPEG-2 Main Profile @ Main Level D...
Page 27 - M ENUS SCREEN STRUCTURE
GB 28 Sy ste m Se ttings 1.T V Screen Format 2.Output Selection 3.UHF Channel Number 4.RF Modulator Type 5.Information Box Time out 6.Display Volume Indicator 7.Date Setting(dd/mm/yyyy) 8.Time Setting(hh:mm) 9.GMT Offset 6.Use r Pre fe re nce 1.Parental Control 2.Language Settings 3.System Settings ...
