Nokia 9802 S - Manuals

GB 7 Viaccess smartcard Only for services coded with the Viaccess CA system. • Insert your smartcard fully into the left slot behind the lid of the front panel of the Mediamaster. The gold chip should face downwards and inwards . PIN Code The Smartcard is loaded with a 4-digit code, also called a PI...

GB 8 The box for your Mediamaster should contain thefollowing items: • the Mediamaster • remote control with 2 AAA batteries • SCART cable (fully connected 1,0 metre) • aerial/RF cable (double screened 1,5 metres) • owner’s manual and software license agreement • mains cable INSTALLATION OF THE MEDI...

GB 9 Connecting to the TV • Connect the SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster. • Connect an RF cable from the TV/VCR output on the Media- master to the RF input socket on the TV. • Connect the TV aerial to the TV AERIAL input socket on the Med...

GB 10 Nokia smart switch Connecting a HiFi system • Connect an RCA/Cinch stereo cable from the AUDIO L R sock- ets on the Mediamaster to the LINE, AUX, SPARE or EXTRAinput sockets on your HiFi system. • If available you can connect an RCA/Cinch single cable from the DIGITAL AUDIO socket on the Media...

GB 11 This procedure is necessary if your Mediamaster is con- nected to the TV with an RF cable, and not via SCART. To tune your TV to the RF signal you might also need your TVmanual in addition to this manual. The steps below explain whatto do if you have been unable to use SCART cables in your con...

GB 12 Language Select the desired menu language.This will also be the main language for audio and subtitling. To select the Norwegian, Finnish and Greek language alternativeyou first have to press the double arrow button . General information Once you have correctly connected the Mediamaster, you al...

GB 15 FIRST TIME INSTALLATION Select one of these alternatives when you have a single antennaequipped with 2 LNBs, or two antennas with one LNB on each,and want to watch channels from ASTRA/HOTBIRD or THOR/SIRIUS. In this case you must first connect the LNBs to an external switchsince there is only ...

GB 16 Line 7 on the antenna satellite selectionMenu This selection is necessary only when your satellite choice dif- fers from the preprogrammed satellite alternatives in the follow- ing ways;• if you do not use an universal LNB • when you have more than two LNB’s. • You also must select this altern...

GB 17 Multisatellite/”mini DiSEqC” and “two port DiSEqC” Select one of these alternatives when your antenna system has two LNBs and when you not use any of the alternatives on the lines 5 - 6 from the menu “Antenna/satellite selection” onpage 13. FIRST TIME INSTALLATION For each LNB you connect to t...

GB 18 FIRST TIME INSTALLATION Multisatellite/four port DiSEqC Select this alternative if your antenna system has four LNBs and when you are not using any of the alternatives on the lines 5 - 6 from the menu “Antenna/satellite selection” on page 13. The selection of the different LNBs must be control...

GB 20 LNB type • Select Universal, one of the fixed frequencies or enter the LNB frequency with the numeric buttons on the remote control. Type of motor • Select SATSCAN if it is a Nokia SatScan motor. • Select DiSEqC in case the motor you use is controlled by DiSEqC commands. Motor antenna In case ...

GB 21 FIRST TIME INSTALLATION Predefined channel Select the predefined channel that will give the best Signal qual-ity (SNR) bar indication. Within a few seconds you will get picturefrom the channel in the background. Adjust motor • If necessary, fine tune the motor with the buttons on the remote co...

GB 23 FIRST TIME INSTALLATION Channel search progress This menu will be shown as long as the Mediamaster is search-ing for channels to download All channels found will be listed in two columns on the screen;with TV channels in one column and radio channels in the other. Please note that the search p...

GB 24 VIEWING MODE General information The following describes the basic functions of your Mediamasterwhile watching satellite TV or listening to satellite radio. Some of the functions described here are dependent on theService Provider and can only be used if they are included inthe transmitted pro...

GB 25 VIEWING MODE The “i” (information) button The Mediamaster has the ability to display information about pro-grammes currently being broadcast as well as those being broad-cast next. This procedure is the same for both TV and radio mode. By pressing the “ i ” button while watching TV you will ge...

GB 26 List of TV and radio channels At the channel search procedure, three channel lists are created.One list named “All TV” containing all channels, another named“Free TV” containing only free channels and “Viasat” containingchannels distributed by Viasat.In the “All TV” list scrambled channels are...

GB 27 VIEWING MODE TV release (0) With the 0 button you can toggle between analogue terrestrial TV, video, analogue and digital satellite TV signals.(This is only valid if the units are connected via SCART cables, andnot by a RF connection.) Video recording Please note, that during the recording of ...

GB 28 MAIN MENU General information Many of the functions of the Mediamaster are available from theMain menu. Press MENU to open it. You can always leave a menu at any time you want, without af-fecting any settings, by pressing the EXIT button. TV and radio channels Please refer to “List of TV and r...

GB 32 Update channels When new TV and radio channels are added to the different sat-ellites, you can check and automatically update the channel lists. New channels will be marked with a star in the channel lists. After each download, check the channel lists for new channelsmarked with . During the s...

GB 33 MAIN MENU System configuration You will be asked to enter your access code before you can en-ter this menu. The code is preset to 1234 from the factory.(The code can be changed from the Parental control menu. Re-fer to page 40.) If you want to customize the system to suit you better, you cansp...

GB 35 Edit satellites When a new satellite has been sent into orbit, or if you select anot preprogrammed satellite, you can add it to the existing sat-ellite list. To add a new satellite • Select the line “New satellite”. • Press OK . • Enter the name of the new satellite. (How to enter a name is de...

GB 37 MAIN MENU TV settings TV screen format Select your TV screen format. The 4:3 format is the standard format for most TV screens.Select 16:9 for a wide screen TV. TV signal If the teletext function does not work when watching channelsfrom an analogue satellite receiver connected to the Media-mas...

GB 38 MAIN MENU Time adjustment The time is adjusted by using the buttons, ± 1/2 an hour at a time.You can also adjust the minutes by using the buttons. Modem configuration The modem function is only working in the Scandinaviancountries and Greece. The Mediamaster is equipped with a built in telepho...

GB 39 MAIN MENU Receiver upgrade In order to keep the Mediamaster up-to-date, it will be possibleto download new versions of the system software via satelliteand from the Internet. New software may include new or im-proved features for existing menus. Enter this menu to check for new software. If ne...

GB 40 MAIN MENU Parental control To open this menu you will be asked to enter your access code. From the factory the access code is set to 1234 . The following settings can be altered from this menu. Receiver lock If you select “On,” you will have to enter the access code everytime you start the Med...

GB 41 Appearance preferences Banner time-out When you switch channels, an information banner will be shownfor a few seconds. You can select for how long the banner willbe shown. Volume bar Select whether or not you want the volume bar to appear on thescreen when you change the volume. Volume bar tim...

GB 42 MAIN MENU System information If you have to contact your service provider or a service center,they might ask for information available from this menu. There-fore, it is important that you first check the information in thefollowing menus. Diagnostics To find out the condition of certain parts ...

GB 43 Conditional Access This menu will only be activated if you have inserted a valid Smart-card in the slot behind the front lid. If more than one CA system is activated, select the one fromwhich you want information. The Viaccess Conditional Access (CA) System is embedded in theMediamaster. A Sma...

GB 44 MAIN MENU Timer settings Select Timer from the Main Menu. Select channel list and channel with the buttons. The chan- nel can also be entered with the numeric buttons. The present date (month/day) will automatically be preselect. Always enter settings with two digits for month, day, hour and m...

GB 45 Parental control A feature that allows parents to ”lock” programmes thatthey consider unsuitable for children. A ”locked” chan-nel or programme can only be ”unlocked” with the spe-cial parental access code. Parental Access code A four-digit code stored in the Mediamaster. Used tolock the Media...

GB 46 Problem The display on the front panel doesnot light up/is not lit. No sound or picture, but the frontpanel shows the time or - - : - -. No sound or picture. No sound or picture on horizontalmodulated transponder. Bad picture/blocking error. There is no Welcome menu on thescreen after you swit...

GB 47 PROBLEM SOLVING FRONT PANEL DISPLAY Problem The remote control is not working. You see the on-screen message. Viewing card error. You have forgotten your secret PINcode. CA Module is not working. No picture. Possible causes Battery exhausted.Remote control is incorrectlyaimed. The Mediamaster ...

GB 48 Transmission standards DVB, MPEG 2 LNB / Tuner input Connector 1x F-type (LNB) RF input frequency 920-2150 MHz RF input power level -20 to -70 dBmSupply voltage 13,5 /18,5 V ± 5% Max. current 500 mA, overload protected Control voltage 22 kHz, 0,65 V pp DiSEqC Tone burst A/B orLevel 1.2 RF impe...