Page 3 - Contents
GB 3 Contents FOR YOUR SAFETY 4 Rear panel 4 Front panel 5 INSTALLATION OF THE MEDIAMASTER 5 Connecting the Mediamaster to the satellite dish 6 Connecting the Mediamaster to a TV set 6 Connecting to a TV and a video recorder 7 If your VCR does not have a SCART- Connector 7 Connecting to an analogue ...
Page 4 - FOR YOUR SAFETY
GB 4 • Keep a clear space around the Mediamaster to allow for sufficient ventilation. • Do not cover the Mediamaster or place it on a unit that emits heat. • Use a soft cloth and a mild solution of dish washing liquid to clean the casing. • Never allow liquids, spray or other materials to come into ...
Page 5 - Front panel; INSTALLATION OF THE MEDIAMASTER
GB 5 The box for your Mediamaster should contain the following items: Mediamaster 9400 S includes About the SCART sockets Ÿ The rear panel of the Mediamaster is equipped with 2 SCART sockets. When you connect other products to any of these sockets, always use fully featured SCART cables (as supplied...
Page 6 - Connecting the Mediamaster to the satellite dish
GB 6 Installing the satellite dish Ÿ Your satellite dish should be installed with a cable for you to connect to the Mediamaster. If you do not have this cable you will need to buy one from a dealer (tell the dealer you need a coaxial cable and F-connectors). Ÿ Connect the cable from the satellite di...
Page 7 - Connecting to a TV and a Video recorder
GB 7 Refer to your video recorder manual for full instructions. Ÿ Connect one SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster. Ÿ Connect another SCART cable between the VCR and the AUX SCART socket on the Mediamaster. Ÿ Connect the RF cable from the RF ...
Page 8 - Connecting to Hi Fi system
GB 8 Connect an RCA/Cinch stereo cable from the AUDIO L R sockets on the Mediamaster to the LINE, AUX, SPARE or EXTRA input sockets on your Hi Fi system. Ÿ Remove the cover on the battery compartment at the bottom of the remote control handset. Ÿ Insert the 2 x AAA (1,5 V) batteries, as shown in the...
Page 9 - REMOTE CONTROL
GB 9 This section describes how to operate the Mediamaster using the buttons on the remote control. Some of the functions can also be carried out using the buttons on the front panel. To switch the Mediamaster in and out of standby mode. EXIT TV To return to the viewing mode from a menu without stor...
Page 12 - Automatic Channel Search
GB 12 Satellite name: From here you can select a name for the configuration. Switch Type: There are in principle two kinds of external DiSEqC switches on the market at present. One for connection of two LNBs. The other one for connection of up to 4 LNBs. If you have the other switch, defined as DiSE...
Page 14 - TV Screen Format
GB 14 If you have a TV set with a 4:3 picture format, and the transmission is in 16:9, you can select “ 4:3 (Pan & Scan) ” or “ 4:3 (Letterbox) ” to change display format. “ 4:3 (Pan & Scan) ” will fill up the screen vertically, but cut off some information from the left and right sides of t...
Page 18 - OK; Rearrange List
GB 18 If you have created several Favorite lists you can determine the sequence in which the lists will appear. To rearrange channels, select the list which you want to move using the OK button. Move the channels to the desired position using the UP/DOWN button and press OK. You can change the list ...
Page 20 - Language Settings
GB 20 Change access code From here you can change the access code from the standard 1234. DO NOT FORGET IT! Without it you do not have access to any of the functions where the code is required! If you forget it, you have to contact an Authorized Nokia Service Center to get help. From here you can ch...
Page 21 - GAME
GB 21 You can enjoy this On/Off Timer for such a convenience as wake-up or automatic VCR recording. Mediamaster will be automatically switched-on and play specified channel for the specified time, and then switched-off. You may specify up to 8 separate lists with turn-on time, date, duration, channe...
Page 22 - INSTALLATION SUBMENUS
GB 22 Select this Menu from the line “Installation” in the Main Menu. The submenu will give you the opportunity to change the preferences performed during first time installation. You can also add features that were not included in the first installation. Please note that helpful information for eve...
Page 24 - GLOSSARY OF TERMS
GB 24 AGC Acquisition Gain Control. Audio system With digital satellite reception, the sound is transmitted in packages and is elected either in a special audio mode or pre-selected by using the installation set-up. This makes it possible to select between several different languages in a film. The ...
Page 25 - PROBLEM SOLVING
GB 25 Problem Possible causes What to do The display on the front panel does not light up/is not lit. Mains lead is not connected. Check that the mains lead is plugged into the power socket. No sound or picture. The satellite dish is not pointing at the satellite. No signal or weak signal. The LNB i...
Page 26 - TECHNICAL SPECIFICATION
GB 26 Transmission Standards DVB,MPEG2 LNB/Tuner input Connector 2 x F-type (Loop Through) Input frequency 950-2150MHz Max Current 500mA max Supply Voltage 13V/18V DiSEqC 1.0 RF Impedance 75 ohm Demodulator QPSK Symbol rate 2-45 Msym/s SCPC and MCPC Video decoder MPEG-2 Main Profile @ Main Level Dat...
Page 27 - MENUS SCREEN STRUCTURE
GB 27 System Settings 1.TV Screen Format 2.Output Selection 3.UHF Channel Number 4.RF Modulator Type 5.Information Box Time out 6.Display Volume Indicator 7.Date Setting(dd/mm/yyyy) 8.Time Setting(hh:mm) 9.GMT Offset 7.Game First Time Installation MENUS SCREEN STRUCTURE Welcome Menu Language Setting...
Page 28 - Nokia is a registered trademark of Nokia Corporation
Nokia is a registered trademark of Nokia Corporation www.nokia.com 66 76967-10 KQX1A668Y
