Nokia 9200S - Manual

GB 7 With Video recorder Connecting to an analogue satellite receiver and a video recorder • Connect one SCART cable between the TV set and the TV SCART socket on the Mediamaster. • Connect one SCART cable between the TV SCART socket on the analogue satellite receiver and the SAT SCART socket onthe ...

GB 8 You can now plug in the mains plug of the Mediamaster to thewall socket. • Switch on your TV set. • When the Mediamaster is connected to the TV set, you will now see a welcome message on the screen. You may nowproceed to page 11 “Basic Settings”. However, we recomend that you read the other inf...

GB 9 To turn the Mediamaster on/off (standby). Press once to switch to audio language/audio track(if available). Press twice to switch to Radio mode. TV To leave a menu and go back to watch a TV pro-gramme. To switch from Radio Mode to TV Mode.To toggle between terrestrial TV, VCR, analogue andthe d...

GB 10 To be able to receive pay-TV channels you will need a CA Mod-ule and a Smart Card from the Service Provider of your choice. The Service Provider is the distributor of the programmes. If you are subscribing to services from more than one ServiceProvider, you might have to change between differe...

GB 11 Antenna configuration In order to configure your equipment (satellite dish and LNB) youwill need to use the following menus. The LNB is the receiving unit which is mounted on the satel- lite dish. For the following setup procedure you have to knowthe Local Oscillator (LO) frequency valid for y...

GB 14 Antenna alternative : Select an Antenna alternative from 1 to 8. Please note, that the parameters in the menu are prepro-grammed, but you can change any of them to suit your combi-nation. Name for the satellite: From here you can select a name for the configuration. LNB frequency : Selection i...

GB 15 SMATV or IF frequency channel searchModel 9200 S only A SMATV network is commonly found in smaller block of flats.In such a network you will have access to a central antenna sys-tem. If the Mediamaster is connected to a SMATV network, select“SMATV or IF frequency search”. Pressing the OK butto...

GB 16 Start/stop watching TV To start the Mediamaster from stand-by mode, press the but- ton, TV button or one of the number buttons on the remote con- trol. It is also possible to start by pressing the button behind the lid on the front of the Mediamaster. Put the Mediamaster into stand-by by press...

GB 20 How to show the Main Menu Press the MENU button and you will get the Main Menu on the TV screen. Press the TV or EXIT button to leave the menu. Submenus from the Main Menu If you select one of the highlighted titles and press the OK but- ton, a submenu will be shown on the TV screen. From a su...

GB 22 Antenna Configuration and Channel Search The “Antenna Configuration” line will bring you to the “AntennaConfiguration Set-up” menu. The settings for this menu are al-ready described on page 14. If you select “Channel Search”, you can choose between the“Channel Search set up” described on page ...

GB 24 Symbols on the Mediamaster display No TS No Transport Stream = No signal. Channel name. Signal indicator.A square means full signal. ? No function. Err Error message. UPGRADE The Mediamaster is busydownloading new software. Automatic Installation Will start the Installation procedure from the ...

GB 25 MPEG Moving Picture Experts Group NVOD Near Video On Demand PCR Program Clock Reference PID Package Identifier P I N c o d e P e r s o n a l I d e n t i f i c a t i o n N u m b e r. A four-digit code that is used for locking/unlocking, egwith the parental control feature. Default value is nor-...

GB 26 Problem solvings What to do if you can’t solve the problem If you have tried all of the actions suggested above, without solving the problem, please contact your dealer. Problem The display on the front panel doesnot light up/is not lit No sound or picture Bad picture/blocking error The remote...

GB 27 Transmission Standards DVB, MPEG 2 LNB / Tuner input Connector 1x F-type (LNB) RF input frequency 950-2150 MHz RF input power level -20 to -70 dBmSupply voltage 13,5 /18,5 V ± 5% Max. current 400 mA, overload protected Control voltage 22 kHz, 0,65 V pp DiSEqC Tone burst A/B orLevel 1, 1-4 RF i...