Niles MS-1 - Manual
Niles MS-1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – I ntroduction; Main System Unit — IntelliControl; TABLE OF CONTENTS; Introduction; MicroSensor
- Page 3 – Features and Benefits; 00% factory tested for pickup range and angle.; IMPORTANT
- Page 4 – Installation Considerations; Type of Cable; DO NOT USE UNSHIELDED CABLE WITH THE MS-1.; MS-1 Mounting Location; In a cabinet door; TOOLS; Slotted
- Page 5 – Receiving Range and Pickup Angle; The IR pickup angle of the MS-1 is 60; Figure 3
- Page 6 – Avoiding Electrical Interference; Do not install the
- Page 7 – Avoiding Optical Feedback; Lower the output power of the flasher(s) using the variable; Changing the Color of the MS-1; If you need to change the color of the MS-1:; Figure 1
- Page 8 – Removing the Bezel
- Page 10 – Installation; Determine a mounting location for the MS-1. Select a; Figure 2
- Page 11 – Secure the MS-1 by tightening the hex nut. DO NOT; * You must use the bare; Wiring Diagram
- Page 12 – Operation; Range
- Page 13 – Troubleshooting; If the MS-1 does not work, and the LED does not light at all:
- Page 15 – Specifications
MS-1
I N S T A L L A T I O N & O P E R A T I O N G U I D E
M O D E L
MS-1
MICROSENSOR
™
MINIATURE INFRARED SENSOR
MS-1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
I ntroduction The MS-1 is a miniature IR sensor designed for use with theNiles Infrared Repeating systems. Installed in a remote room location, the MS-1 receives the IRcommands transmitted fr om your existing hand-heldremotes in that room. The commands are carried via a small2-conductor shielded cab...
Features and Benefits The MS-1 offers a number of improvements over otherminiature IR sensors. ● Small size of only 1/2" diameter by 2-5/16" long — fitsalmost anywhere. ● Universal system — compatible with virtually all brands ofA/V equipment and remote controls. ● Excellent IR receiving ran...
Installation Considerations Type of Cable The MS-1 connects to the Niles Infrared Systems with ani n d i v i d u a l h o m e r u n o f 2 - c o n d u c t o r s h i e l d e d c a b l e .Recommended cables are Niles data grade IR cable, WestPenn D291, Belden 8761, Carol C2516 or equivalent, madeof two ...