NEC MultiSync V321 - Manual

English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTI-FUNCTION MONITOR: • DO NOT OPEN THE MONITOR . There are no user serviceable parts inside and opening or removing coversmay expose you to dangerous shock hazards or other risks.Refer all servicing...

English-4 Contents Power Cord* 1 Setup Manual Video Signal Cable (Mini D-SUB 15 pin to Mini D-SUB 15 pin) Wireless Remote Control and AAA Batteries Clamp x 2 Your new MultiSync monitor box* should contain the following: • LCD monitor • Power Cord* 1 • Video Signal Cable • Setup Manual • Wireless Rem...

English-5 English This device cannot be used or installed without the TabletopStand or other mounting accessory for support. For properinstallation it is strongly recommended to use a trained,NEC authorized service person. Failure to follow NECstandard mounting procedures could result in damage to t...

English-6 NOTE: Regarding VESA mounting interface patterns onV321, it is not centered over the Vertical Centerlineof screen as the above figure. V461 and LCD4215 (R) Attaching Mounting Accessories The display is designed for use with the VESA mountingsystem. 1. Attach Mounting Accessories Be careful...

English-8 DOWN ( ) button Acts as button to move the highlighted area down toselect adjustment items within OSD menu. EXIT button Activates the OSD menu when the OSD menu is turned-off.Acts as EXIT button within the OSD to move to previousmenu. Remote control sensor and Power Indicator Receives the ...

English-9 English Terminal Panel AUDIO OUT To output the audio signal from the AUDIO IN 1, 2 and 3jack to an external device (stereo receiver, amplifier, etc.). VIDEO INPUT/OUTPUT Connector VIDEO IN connector (BNC): To input a composite video signal. VIDEO OUT connector (BNC): To output the composit...

English-10 PIP (Picture In Picture) button ON/OFF button: Toggle switches between PIP and POP (Picture Out Picture). See page 20. INPUT button: Selects the “picture in picture” input signal. CHANGE button: Replaces to the main picture and sub picture.NOTE: The “PIP” and “POP” modes do not function w...

English-11 English Operating Range for the RemoteControl Point the top of the remote control toward the LCD monitor’sremote sensor during button operation. Use the remote control within a distance of about 7 m (23 ft.)from the front of the LCD monitor’s remote control sensor orat a horizontal and ve...

English-12 1. Determine the installation location CAUTION: Installing your LCD display must be done by aqualified technician. Contact your dealer formore information. CAUTION: MOVING OR INSTALLING THE LCD MONITORMUST BE DONE BY TWO OR MORE PEOPLE.Failure to follow this caution may result in injury i...

English-14 Connections NOTE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in aloss of the monitor image. NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound. Before mak...

English-15 English Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer’s screen image.Some video cards with a pixel clock over 165 MHz may not display an image correctly.Your LCD monitor displays proper image by adjusting the factory p...

English-16 Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red while powered off. NOTE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or thePower Button on the front of ...

English-17 English Picture Mode DVI, VGA, RGB/HV STANDARD sRGB HIGHBRIGHT HDMI, DVD/HD, S-VIDEO, VIDEO1, VIDEO2 STANDARD CINEMA HIGHBRIGHT NORMAL: Displays the aspect ratio the same as it is sent from the source. FULL: Fills entire screen. DYNAMIC: Expands a 4:3 pictures to fill the entire screen wi...

English-19 English Setting Default BRIGHTNESS Adjusts the overall image and background brightness. CONTRAST Adjusts the image brightness in relation to the input signal.NOTE: sRGB picture mode is standard and cannot be changed. SHARPNESS Adjusts the crispness of the image. BLACK LEVEL Adjusts the im...

English-21 English OSD H-POSITION Adjusts the horizontal position of the OSD menu. OSD V-POSITION Adjusts the vertical position of the OSD menu. INFORMATION OSD Selects the information OSD displays or not. The information OSD will display when input signal or sourcechange or warning message like as ...

English-22 SIDE BORDER COLOR Adjusts the color of the side borders when a 4:3 image is displayed.Press + button, the bar will become lighter.Press - button, the bar will become darker. DISPLAY PROTECTION Resets the all settings within the DISPLAY PROTECTION menu back to factory setting. RESET INPUT ...

English-23 English NOTE 1: CREATING A SCHEDULE Using the “SCHEDULE” function allows you to set up to seven different scheduled time intervals when the LCD Monitor will be activated.You can select the time the monitor turns on and turns off, the day of week the monitor is activated, and which input s...

English-24 Controlling the LCD monitor via RS-232C Remote Control This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. Functions that can be controlled by a personal computer are: • Power ON or OFF • Switching between input signals Connection LCD Monitor + PC...

English-25 English Connecting to a Network Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings by using an HTTP server function. NOTE: When you use this function, EXTERNAL CONTROL should be “LAN” (See page 21). To use a LAN connection, you are required to assign ...

English-27 English Alert Mail Setting http://<the Monitor’s IP address>/lanconfig.html Type in the hostname of the network connected to the monitor.Up to 60 alphanumeric characters can be used. Type in the domain name of the network connected to the monitor.Up to 60 alphanumeric characters can...

English-28 Features Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. Color Control Systems: Allows you to adjust the colors on your screen and customize the color accuracy of your monitor to a variety of standards....

English-29 English Troubleshooting No picture • The signal cable should be completely connected to thedisplay card/computer. • The display card should be completely seated in its slot. • Front Power Switch and computer power switch shouldbe in the ON position. • Check to make sure that a supported m...

English-30 Specifications - V321 Product Specifications LCD Module 32"/80.0 cm diagonal Pixel Pitch: 0.511 mm Resolution: 1366 x 768 dots Color: Over 16 million colors (depending on video card used) Brightness: 450 cd/m 2 (Typ.) Contrast Ratio: 3000:1 Viewing Angle: 89° (typ) @ CR>10 Design V...

English-31 English Specifications - V461 Product Specifications LCD Module 46"/116.8 cm diagonal Pixel Pitch: 0.530 mm Resolution: 1920 x 1080 dots Color: Over 16 million colors (depending on video card used) Brightness: 450 cd/m 2 (Typ.) Contrast Ratio: 3000:1 Viewing Angle: 89° (typ) @ CR>1...

English-33 English Pin Assignment RS-232C input Pin No Name 1 connected to 7&8 2 RXD 3 TXD 4 connected to 6 5 GND 6 connected to 4 7 connected to 1&8 8 connected to 1&7 9 NC 1 6 5 9 D-SUB 9P This LCD monitor uses RXD, TXD and GND lines for RS-232C control. Downloaded From TV-Manual.com M...

English-34 NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’stop priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help define and...