NEC LCD3090WQXi - Manual

English English-3 Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous sh...

English English-5 Contents Your new NEC monitor box* should contain the following: • MultiSync LCD3090WQXi monitor with tilt/swivel/pivot/height adjust stand • Power Cord • Video Signal Cable (15-pin mini D-SUB male to DVI-A) • Video Signal Cable (DVI-D to DVI-D cable) • User ’s Manual • CD-ROM • Ca...

English-6 Figure C.1 Figure C.2 Quick Start To attach the LCD monitor to your system, follow these instructions: NOTE: Make sure to read “Recommended Use” before installation.In order to display the maximum resolution, a video card that can output a resolution of 2560 x 1600 is needed.The monitor mu...

English-8 Tilt Grasp top and bottom sides of the monitor screen with yourhands and adjust the tilt as desired ( Figure TS.1 ). Figure TS.1 Swivel Grasp both sides of the monitor screen with your hands andadjust the swivel as desired ( Figure TS.2 ). NOTE: Handle with care when tilting the monitor sc...

English English-9 Mount Flexible arm 1. Using the 4 screws from the stand removal and attach the arm to the monitor ( Figure F.1 ). Caution: • When mounting, use ONLY the screws (4 pcs) that wereremoved from the stand to avoid damage to the monitor orstand. • The monitor should only be used with an ...

English-10 Controls OSD (On-Screen Display) control buttons on the front of the monitor functionas follows: To access OSD menu, press the MENU button.To change signal input, press the SELECT button. NOTE: OSD must be closed in order to change signal input. * The “LEFT/RIGHT” and “UP/DOWN” buttons fu...

English English-11 Brightness/Contrast Controls BRIGHTNESS Adjusts the overall image and background screen brightness. NOTE: The upper portion (higher settings) of the brightness level is adjusted using the backlight output.If a very low brightness level (low setting) is used the contrast level may ...

English-12 FINE (Analog input only) Improve focus, clarity and image stability by increasing or decreasing this setting. If the “Auto Adjust function” and the “H.Size” function do not give you a satisfactory picture setting, a fine tuning canbe performed using the “Fine” function. For this a Moiré t...

English English-13 HDCP CONTENT (Digital Input Only) Selects the type of input to be used with HDCP CONTENT. OFF: When a PC or other computer equipment is connected, select “OFF”. ON: When a DVD player or other type of high definition device is connected, select “ON”. NOTE: Interlaced signals (480i,...

English English-15 Specifications Monitor Specifications MultiSync LCD3090WQXi Monitor Notes LCD Module Diagonal: 75.6 cm/29.8 inches Active matrix; thin film transistor (TFT) Viewable Image Size: 75.6 cm/29.8 inches liquid crystal display (LCD); 0.251 mm dot Native Resolution (Pixel Count): 2560 x ...

English-16 Features DVI-I: The integrated interface ratified by the Digital Display Working Group (DDWG) that allows both digital and analog connectors off of one port. The “I” stands for integration for both digital and analog, The digital portion is DVI-based. DVI-D: The digital-only subset of DVI...

English English-17 Troubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Check the Vacation Switch should be in the ON position. • Front Power Switch and computer power switch should be...

English-18 Tag1 Brightness Adjusts the overall image and screen background brightness.Press “Left” or “Right” to adjust.When AUTO LUMINANCE is OFF or 2, the brightness level is adjusted/measured usingpercentage (%).When AUTO LUMINANCE is 1 or 3, brightness level is adjusted/measured using cd/m 2 . T...

English English-25 Figure S.4 Figure S.5 Figure S.3 Sensor Port USB Sensor Sensor port is located atthe back of the monitor. Self Calibration Simply connect the external USB sensor, and the brightness, white tint and gamma levels are calibrated without the need of acomputer. This feature works for d...

English English-27 Figure C.5 Figure C.6 Figure C.4 Sensor Port USB Sensor Sensor port is located atthe back of the monitor. White Point Matching/Copy Calibration Calibration settings can be copied from one display to one or more additional displays. Using this feature reduces thevariation between d...

English English-29 Using the Auto Brightness function The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient light within theroom. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dimaccording...

English English-31 TCO’06 Congratulations! The product you have just purchased carries the TCO’06 MediaDisplays label. This means that your display is designed andmanufactured according to some of the strictest performance andenvironmental criteria in the world. The manufacturer of thisdisplay has s...

English-32 NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’stop priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help define and...