Nady UHF 10 - Manual
Nady UHF 10 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – UHF 10 RECEIVER
- Page 4 – UH-10 HANDHELD MICROPHONE; DIVERSITY LED
- Page 5 – UB-10 BODYPACK TRANSMITTER
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1. Powering the Receiver Plug the 12V AC/DC ADAPTER (12) provided into the DC INPUT JACK (6) on the back of the receiver. Then plug the power supply into an AC outlet. (Note: Any DC source with 300mA capability can also be used.) Press the POWER SWITCH (5) once to turn on the receiver. The POWER ON ...
Microphone Connection (using the UB-10 transmitter with either aheadworn or lavalier microphone or the UH-10 handheld microphonetransmitter) For microphone use, either the BALANCED MIC AUDIO OUTPUT XLR (11) or the 1/4" line level AUX AUDIO OUTPUT (10) can be used. The XLR output is set at a non-...
(Note: The INPUT LEVEL CONTROL (27) is deactivated and not used when the UB-10 is in INSTRUMENT mode. Levels should be adjusted with thevolume control of your instrument.) The AF PEAK LED INDICATOR (3) on the UHF 10 receiver will light for all loud input signals. Occasional flickering on and off dur...
