Nady UHF 10 - Manuals

1. Powering the Receiver Plug the 12V AC/DC ADAPTER (12) provided into the DC INPUT JACK (6) on the back of the receiver. Then plug the power supply into an AC outlet. (Note: Any DC source with 300mA capability can also be used.) Press the POWER SWITCH (5) once to turn on the receiver. The POWER ON ...

Microphone Connection (using the UB-10 transmitter with either aheadworn or lavalier microphone or the UH-10 handheld microphonetransmitter) For microphone use, either the BALANCED MIC AUDIO OUTPUT XLR (11) or the 1/4" line level AUX AUDIO OUTPUT (10) can be used. The XLR output is set at a non-...

(Note: The INPUT LEVEL CONTROL (27) is deactivated and not used when the UB-10 is in INSTRUMENT mode. Levels should be adjusted with thevolume control of your instrument.) The AF PEAK LED INDICATOR (3) on the UHF 10 receiver will light for all loud input signals. Occasional flickering on and off dur...