Page 2 - prOpOSitiOn 65 warninG
page 2 — Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) prOpOSitiOn 65 warninG Engine exhaust and some of its constituents, and some dust created of California to cause cancer, birthdefects and other reproductive harm. by power sanding, sawing, grinding, drilling and other construction a...
Page 3 - SILICOSIS WARNING; SilicOSiS/reSpiratOry warninGS
Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) — page 3 Grinding/cutting/drilling of masonry, concrete, metal andother materials with silica in their composition may giveoff dust or mists containing crystalline silica. Silica is abasic component of sand, quartz, brick clay, granite andnu...
Page 4 - table Of cOntentS; professional pavement Saw; Dimensions
page 4 — Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) table Of cOntentS Sp118 Streetpro professional pavement Saw Proposition 65 Warning ........................................... 2 Silicosis/Respiratory Warnings ................................ 3 Table Of Contents ......................
Page 5 - partS OrDerinG prOceDureS; Ordering parts has never been easier!; Choose from three easy options:; Order via Internet; Order; Order via Fax
Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) — page 5 partS OrDerinG prOceDureS www .multiquip .com Ordering parts has never been easier! Choose from three easy options: WE ACCEPT ALL MAJOR CREDIT CARDS! When ordering parts, please supply: ❒ Dealer Account Number ❒ Dealer Name and Addr...
Page 6 - traininG cHecKliSt; Training Checklist
page 6 — Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) traininG cHecKliSt Training Checklist no, Description oK? Date 1 Read operation manual completely. 2 Machine layout, location of components, checking of engine and hydraulic oil levels. 3 Fuel system, refueling procedure. 4 Operatio...
Page 7 - Daily pre-OperatiOn cHecKliSt; Daily pre-operation Checklist
Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) — page 7 Daily pre-OperatiOn cHecKliSt Daily pre-operation Checklist 1 Hardware and damage check 2 Engine oil level 3 Hydraulic oil level 4 Condition of blade 5 Safety stop switch operation 6 Braking control operation
Page 8 - Safety infOrMatiOn; SaFeTY meSSageS; Danger
page 8 — Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) Safety infOrMatiOn Do not operate or service the equipment before reading the entire manual. Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the safety messages and op...
Page 9 - general SaFeTY
Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) — page 9 Safety infOrMatiOn general SaFeTY CauTion never operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective devices required by...
Page 10 - Saw SaFeTY
page 10 — Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) Safety infOrMatiOn Saw SaFeTY Danger Engine fuel exhaust gases contain poisonous carbon monoxide. This gas is colorless and odorless, and can cause death if inhaled. The engine of this equipment requires an adequate free fl ow ...
Page 11 - BlaDe SaFeTY; engine SaFeTY
Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) — page 11 Safety infOrMatiOn BlaDe SaFeTY warning Rotating blade can cut and crush. alwaYS keep hands and feet clear while operating the saw. CauTion never operate the saw without blade guards and covers in place. Exposure of the diamond...
Page 12 - Fuel SaFeTY
page 12 — Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) Safety infOrMatiOn Fuel SaFeTY Danger Do noT add fuel to equipment if it is placed inside truck bed with plastic liner. Possibility exists of explosion or fi re due to static electricity Do noT start the engine near spilled fue...
Page 13 - liFTing SaFeTY; TranSporTing SaFeTY
Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) — page 13 Safety infOrMatiOn liFTing SaFeTY CauTion never allow any person or animal to stand underneath the equipment while lifting. Some saws are very heavy and awkward to move around. Use proper heavy lifting procedures. Do noT atte...
Page 14 - environmenTal SaFeTY/DeCommiSSioning; Do noT; emiSSionS inFormaTion; emission Control label
page 14 — Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) Safety infOrMatiOn environmenTal SaFeTY/DeCommiSSioning NOTICE Decommissioning is a controlled process used to safely retire a piece of equipment that is no longer serviceable. If the equipment poses an unacceptable and unrepairabl...
Page 15 - nOteS
Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) — page 15 nOteS
Page 16 - DiMenSiOnS/SpecificatiOnS; Table 2. Saw Specifications
page 16 — Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) DiMenSiOnS/SpecificatiOnS Figure 1. SP118 Dimensions Table 1. Dimensions reFerenCe leTTer DeSCripTion DimenSion A Height w/handle– in. (cm) 43.00 (109 cm) B Length w/pointer raised – in. (cm) 46.0" (117 cm) C Length w/pointer l...
Page 17 - SpecificatiOnS; Table 3. noise and vibration emissions; Engine Oil Capacity
Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) — page 17 SpecificatiOnS noTeS: 1. Sound Pressure and Power Levels are “A” weighted Measures per ISO 226:2003 (ANSI S1.4-1981). They are measured with the operating condition of the machine which generates the most repeatable but highest val...
Page 18 - General infOrMatiOn; inTenDeD uSe; all Sp118 SawS are designed, engineered and; FeaTureS; or
page 18 — Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) General infOrMatiOn inTenDeD uSe Operate the SP118 Saw, tools and components in accordance with the manufacturer's instructions. Use of any other tools for stated operation is considered contrary to designated use. The risk of such...
Page 19 - cOMpOnentS
Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) — page 19 cOMpOnentS For quick reference, Figure 3 highlights basic features of the SP118 Saw.1. engine Stop Switch — Located on the handle bar, easy toggle to STOP engine. 2. anti-vibration Handle Bar — Assists in the harmonic damping of th...
Page 20 - baSic enGine; Figure 4. Engine Components
page 20 — Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) baSic enGine Figure 4. Engine Components The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers engine manual for instructions & details of operation and...
Page 21 - UPPER LIMIT
Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) — page 21 inSpectiOn/Setup inSpeCTion/SeTup 1. Read and fully understand this manual, the safety intructions in particular, and the engine manufacturer's manual supplied with the saw. 2. Select the correct blade for each application. Refer t...
Page 23 - Do noT; SpeCiFiC ToolS To Be uSeD; warning
Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) — page 23 3. Check V-belt tension by using a tension meter (3.0 lbs./1.36Kg) against the inside belt at a mid point between the two pulleys, or by deflecting the center belt at a mid point 3/16" (5 mm). Figure 9. V-Belt Alignment 4. Do n...
Page 24 - Figure 10. Diamond Blade; blaDeS
page 24 — Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) Figure 10 highlights the components of a diamond blade. Figure 10. Diamond Blade 1. Drive pin Hole – A commonly located hole on the diamond blade core that prevents operational blade slippage between the inner & outer blade fla...
Page 25 - Diamond Blades; Table 6. material listing and Blade Selection
Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) — page 25 blaDeS Diamond Blades Selecting the diamond blade type and grade defines how the blade will perform both in cutting speed and blade life. Selection of the proper diamond blade consists of: Material to be Cut Type of Saw Being U...
Page 26 - Diamond Blade; Figure 11. Blade Placement; Blade removal and replacement; oFF; Figure 12. Mounting the Diamond Blade
page 26 — Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) blaDeS 4. outside Blade Flange (Collar) — Ensure that the outside blade flange is placed flush against the diamond blade. The inside surface of the flange must be free of debris and permit a tight closure on the surface of the blad...
Page 27 - raiSe/lOwer anD DeptH StOp; Figure 13 highlights the components of the Raise/Lower; Figure 14. Lowering Blade for Depth of Cut; necessary using locknut inside of console.; Figure 15. Setting Depth Stop
Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) — page 27 raiSe/lOwer anD DeptH StOp Figure 13 highlights the components of the Raise/Lower Depth Stop Assembly. Figure 13. Raise/Lower Depth Stop Calibrating the Desired Depth of CutThe SP118 provides for infinite depth adjustment with Diam...
Page 28 - OperatiOn; Figure 16. Engine Stop Switches; CauTion; Figure 17. Parking Brake
page 28 — Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) OperatiOn STarT-up Figure 16. Engine Stop Switches CauTion DO NOT attempt to operate the saw until this manual has been read and thoroughly understood. Engine operating steps may vary. See included engine manufacturer's operating m...
Page 29 - Figure 18. Engine Fuel Valve Lever
Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) — page 29 OperatiOn Figure 18. Engine Fuel Valve Lever 4. Place the ENGINE ON/OFF switch located on the ENGINE (Figure 19) in the "ON" position. Place the ENGINE ON/OFF switch located on the HANDLEBARS (Figure 20) in the "ON"...
Page 30 - Figure 23. Starter Grip; operaTion
page 30 — Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) OperatiOn The resistance becomes the hardest at the compression point. Pull the starter grip briskly and smoothly for starting. Figure 23. Starter Grip 8. If the engine has started, slowly return the choke lever (Figure 21) to the ...
Page 31 - Figure 24. Parking Brake; reSTarTing aFTer inTervenTion
Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) — page 31 OperatiOn 1. Connect the saw to your water source and start the engine as described in the previous section. 2. Rotate the throttle lever (Figure 22) to full throttle.3. Turn the water valve to start the flow of water and ensure su...
Page 32 - Front pointer adjustment
page 32 — Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) Maintenance (Saw) General maintenance practices are cr ucial to the performance and longevity of your saw. The extreme environments of sawing operations require routine cleaning, lubrication, belt tensioning, and inspection for wea...
Page 33 - Engine air filter; Figure 25. Engine Oil Change
Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) — page 33 Maintenance (enGine) general engine Care engine check Check daily for any oil and/or fuel leakage, thread nut and bolt tightness, and overall cleanliness. Engine air filter Replace air filter if dirty. See Engine Owner’s Manual for...
Page 34 - DeCommiSSioning Saw/ComponenTS
page 34 — Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) DecOMMiSSiOninG/water tanK (OptiOnal) DeCommiSSioning Saw/ComponenTS Decommissioning is a controlled process used to safely retire a piece of equipment that is no longer serviceable. If the equipment poses an unacceptable and unrep...
Page 37 - cOnfOrMity certificateS; Care, and Protection of Abrasive Wheels”.; Declaration of Conformity:; Vice President of Manufacturing
Sp118 pavemenT Saw • operaTion manual — rev. #1 (05/03/12) — page 37 cOnfOrMity certificateS SP118 MULTIQUIP, INC. hereby declares that the machine(s) designated as SP118 conforms to the following: 1. American National Standards Institute - This machine has engineered and designed to fully comply wi...
Page 38 - OperatiOn Manual; Your Local Dealer is:; HERE’S HOW TO GET HELP; PLEASE HAVE THE MODEL AND SERIAL; United StateS; Canada
OperatiOn Manual Your Local Dealer is: HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING United StateS Multiquip Corporate Office MQ Parts Department 18910 Wilmington Ave. Carson, CA 90746 Contact: [email protected] Tel. (800) 421-1244 Fax (800) 537-3927 800-427-1244...
