Multiquip QP-3TH - Manual

Multiquip QP-3TH

Multiquip QP-3TH – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
Page: / 2
Loading the manual

The following instructions are intended to assist the user
in starting the QP-3TH Pump. Please read the entire
instructions before starting.

QP-3TH Pump

Starting Instructions

Before Starting

„

Place pump as near to water as possible, on a firm flat, level
surface.

„

To prime pump, remove fill cap and fill pump casing with
water. If the pump casing is not filled with water before starting,
it will not begin pumping.

„

Check for

leaks

between pump and engine.

„

Check that all hoses are

securely

attached to the pump.

„

Check that

the

discharge

hose is not restricted.

„

Make sure

the

suction strainer

is clean and securely

attached to the water end of the suction hose.

DO NOT

open

fill cap

if pump is

hot!

Water inside may be

under pressure.

WARNING

WARNING

WARNING

WARNING

WARNING

2.

Move the

throttle lever

(Figure 2) away from the slow

position, about 1/3 of the way toward the fast position.

Figure 1. Engine Fuel Valve Lever (ON Position)

Figure 2. Throttle Lever (1/3 Start Position)

„

NEVER!

operate the pump without water in the casing as

this will cause damage to the mechanical seal.

„

The strainer should be positioned so it will remain
completely

under water

. Running the pump with the

strainer above water for long periods can damage the pump.

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

Starting the Engine

1.

Place the engine

fuel valve lever

(Figure 1) to the "

ON

"

position.

3.

Place the

choke lever

(Figure 3) in the "

OPEN

" position if

starting a

cold

engine.

4.

Place the

choke lever

(Figure 4) in the "

CLOSED

" position

if starting a

warm engine

or the

temperature is warm.

Figure 3. Engine Choke Lever (Open)

Figure 4. Engine Choke Lever (Closed)

5.

Place the

engine ON/OFF switch

(Figure 5) in the "

ON

"

position.

Figure 5. Engine ON/OFF Switch (ON Position)

DO NOT

pump flammable fluids, corrosive chemicals or fluids

containing toxic substances. These fluids can create potentially
dangerous health and environmental hazards. Contact local
authorities for assistance.

DANGER

DANGER

DANGER

DANGER

DANGER

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Multiquip Models

All Multiquip Other