Page 2 - prOpOsitiOn 65 warning
page 2 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) prOpOsitiOn 65 warning
Page 3 - nOtes
MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) — page 3 nOtes
Page 4 - taBle Of COntents; Mtr40sf rammer; Component drawings; NOTICE
page 4 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) taBle Of COntents Mtr40sf rammer Proposition 65 Warning ........................................... 2 Table Of Contents .................................................... 4 Parts Ordering Procedures ............................
Page 5 - parts Ordering prOCedures; Ordering parts has never been easier!; Choose from three easy options:; order via internet; Order; order via fax
MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) — page 5 parts Ordering prOCedures www .multiquip .com Ordering parts has never been easier! Choose from three easy options: We aCCepT all MaJoR CRediT CaRds! when ordering parts, please supply: ❒ dealer account number ❒ dealer name an...
Page 6 - safety infOrMatiOn; safeTy Messages; dangeR
page 6 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) safety infOrMatiOn Do not operate or service the equipment before reading the entire manual. Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the safety messages ...
Page 7 - geneRal safeTy; RaMMeR safeTy
MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) — page 7 safety infOrMatiOn geneRal safeTy CauTion neveR operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective devices requi...
Page 8 - engine safeTy; fuel safeTy
page 8 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) safety infOrMatiOn engine safeTy dangeR The engine fuel exhaust gases contain poisonous carbon monoxide. This gas is colorless and odorless, and can cause death if inhaled. The engine of this equipment requires an adequate...
Page 9 - TRanspoRTing safeTy; enviRonMenTal safeTy
MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) — page 9 safety infOrMatiOn TRanspoRTing safeTy CauTion NEVER allow any person or animal to stand underneath the equipment while lifting. NOTICE Before lifting, make sure that the equipment parts (hook and vibration insulator) are ...
Page 10 - speCifiCatiOns; Table 1. Rammer specifications
page 10 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) speCifiCatiOns Table 1. Rammer specifications Overall Height 43.7 in. (1,110 mm)) Overall Width 13.8 in. (351 mm) Over Length 24.5 in. (622 mm) Shoe Size (W x L) 5.9 x 10.6 in. (150 x 270 mm) No. of Impacts Per Minute 650 ~ 6...
Page 11 - general infOrMatiOn; CauTion
MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) — page 11 general infOrMatiOn The Multiquip MTR40SF tamping rammer is a powerful compacting tool capable of applying a tremendous force in consecutive impacts to a soil surface. Its applications include soil compacting for r backfillin...
Page 12 - COMpOnents; Figure 1. MTR40SF Rammer
page 12 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) COMpOnents Figure 1. MTR40SF Rammer 5 10 4 6 3 8 7 1 2 9 11 11 Figure 1 shows the location of the controls and components for the MTR40SF Tamping Rammer. The functions of each control is described below:1. Throttle lever — Us...
Page 13 - BasiC engine; Figure 2. Robin Engine
MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) — page 13 BasiC engine Figure 2. Robin Engine The engine (Figure 2) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturer's engine manual for instructions and details of operation and...
Page 14 - inspeCtiOn; do noT use your rammer until this section is thoroughly; prior to operation; Main spring and Crankcase lubrication; do; engine oil Check; Figure 5. Engine Oil Dipstick; PAGE 14 — MTR40SF RAMMER — OPERATION AND PARTS MANUAL —; INSPECTION; INSPECTION
page 14 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) inspeCtiOn This section is intended to assist the operator with the inspection of the rammer. It is extremely important that this section be read carefully before attempting to operate the rammer. do noT use your rammer unt...
Page 15 - geneRal inspeCTion; Table 3. Motor oil grade
MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) — page 15 inspeCtiOn 4. If the oil level is low (Figure 6), fill to the edge of the oil fillerhole with the recommended oil type (Table 3). Maximum oil capacity is .079 gallons (0.3 liters). Figure 6. Oil Level . geneRal inspeCTion 1. ...
Page 16 - OperatiOn; OPERATION; Figure 11. Recoil Starter; PAGE 16 — MTR40SF RAMMER — OPERATION AND PARTS MANUAL —; OPERATION
page 16 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) OperatiOn When starting the MTR40SF, perform the following:1. Open the fuel shut- off valve by moving the fuel cock lever to the open position (Figure 7). . Figure 7. Fuel ShutOff Valve (Open) 2. Set the engine ON/OFF switch ...
Page 17 - sTopping THe engine; MTR40SF RAMMER — OPERATION AND PARTS MANUAL —
MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) — page 17 OperatiOn 1. To start the rammer tamping action, move the throttle lever (Figure 12) quickly from idle (close) to the full open position. do noT move the throttle lever slowly as this may cause damage to the clutch or spring....
Page 18 - MaintenanCe; daily; Figure 16. Primary Air Cleaner; aiR CleaneR; neveR; Figure 17. Engine Air Cleaner; Main spRings lubRiCaTion
page 18 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) MaintenanCe daily Thoroughly remove dirt and oil from the engine compartment and rammer. Clean or replace the air cleaner elements as necessary. Check and retighten all fasteners as necessary. Check the bellows for oil leak...
Page 19 - CRankCase lubRiCaTion; Figure 20. Spark PLug Gap; long TeRM sToRage
MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) — page 19 MaintenanCe CRankCase lubRiCaTion The rammer crankcase bearings (Figure 19) should be lubricated with five shots of grease with a hand grease gun after each eight (8) hours of use. Figure 19. Grease Fittings (Crankcase) U...
Page 20 - Table 4. engine Maintenance schedule
page 20 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) MaintenanCe Table 4. engine Maintenance schedule DESCRIPTION (3) OPERATION BEFORE FIRST MONTH OR 10 HRS. EVERY 3 MONTHS OR 25 HRS. EVERY 6 MONTHS OR 50 HRS. EVERY YEAR OR 100 HRS. EVERY 2 YEARS OR 200 HRS.. Engine Oil CHECK X...
Page 21 - trOuBlesHOOting
MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) — page 21 trOuBlesHOOting Troubleshooting (engine) symptom possible problem solution Diffi cult to start, fuel is available, but no spark at spark plug. Combo lever in incorrect position? Make sure combo lever is in start position. Spa...
Page 24 - explanatiOn Of COde in reMarks COluMn; saMple paRTs lisT; ReMaRks Column
page 24 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) explanatiOn Of COde in reMarks COluMn The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any quest...
Page 25 - suggested spare parts; MTR40sf TaMping RaMMeR WiTH Robin Robin eH09-2f engine; description
MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) — page 25 suggested spare parts NOTICE Part numbers on this Suggested Spare Parts list may supersede/replace the part numbers shown in the following parts lists. MTR40sf TaMping RaMMeR WiTH Robin Robin eH09-2f engine 1 to 3 units Qty. ...
Page 26 - naMeplates and deCals; NAMEPLATE AND DECALS
page 26 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) naMeplates and deCals PAGE 26 — MTR40SF RAMMER — OPERATION AND PARTS MANUAL — REV. #5 (11/01/11) MTR-40F 1 2 6 7 9 13 8 3 4 10 11 12 15 16 5 18 14 17 J 01 9- AP N Oil öl I’ huile SAE30 7~9 cc NPA-961 E READ OWNER’S SERVICE MA...
Page 27 - paRT naMe; DECAL: GASOLINE ONLY
MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) — page 27 naMeplates and deCals no. paRT no. paRT naMe QTy. ReMaRks 1 920210170 DECAL: GASOLINE ONLY 1 2 920211000 DECAL: CAUTION (OPERATION) 1 3 920203990 DECAL: CAUTION (FUEL COCK) 1 4 920209570 DECAL: ENGINE RPM 1 5 920208960 DECAL:...
Page 28 - CrankCase and engine assy; PAGE 28 — MTR40SF RAMMER — OPERATION AND PARTS MANUAL —; CRANKCASE AND ENGINE ASSY.
page 28 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) CrankCase and engine assy PAGE 28 — MTR40SF RAMMER — OPERATION AND PARTS MANUAL — REV. #5 (11/01/11) CRANKCASE AND ENGINE ASSY.
Page 32 - guide Cylinder assy; GUIDE CYLINDER AND FOOT ASSY.
page 32 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) guide Cylinder assy PAGE 32 — MTR40SF RAMMER — OPERATION AND PARTS MANUAL — REV. #5 (11/01/11) GUIDE CYLINDER AND FOOT ASSY.
Page 34 - fuel tank and Handle assy; PAGE 34 — MTR40SF RAMMER — OPERATION AND PARTS MANUAL —; TANK AND HANDLE ASSY.
page 34 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) fuel tank and Handle assy PAGE 34 — MTR40SF RAMMER — OPERATION AND PARTS MANUAL — REV. #5 (11/01/11) TANK AND HANDLE ASSY.
Page 36 - fOOt assy; PAGE 36 — MTR40SF RAMMER — OPERATION AND PARTS MANUAL —
page 36 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) fOOt assy PAGE 36 — MTR40SF RAMMER — OPERATION AND PARTS MANUAL — REV. #5 (11/01/11) FOOT ASSY. (OPTION)
Page 37 - FOOT COVER
MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) — page 37 fOOt assy no. paRT no. paRT naMe QTy. ReMaRks 30 305910050 FOOT ASSY. 150B .............................................1................INCLUDES ITEMS W/ * 31 * 306347930 FOOT 150B 1 32 * 306347960 METAL SHEET 150B 1 33 * 30...
Page 38 - PAGE 38 — MTR40SF RAMMER — OPERATION AND PARTS MANUAL —
page 38 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) narrOw fOOt assy. (OptiOn) PAGE 38 — MTR40SF RAMMER — OPERATION AND PARTS MANUAL — REV. #5 (11/01/11) NARROW FOOT ASSY. (OPTION)
Page 40 - trenCH sHOe assy; PAGE 40 — MTR40SF RAMMER — OPERATION AND PARTS MANUAL —
page 40 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) trenCH sHOe assy PAGE 40 — MTR40SF RAMMER — OPERATION AND PARTS MANUAL — REV. #5 (11/01/11) TRENCH SHOE ASSY.
Page 44 - ROBIN EH09-2F ENGINE — CRANKSHAFT AND PISTON ASSY.; PISTON RING SET
page 44 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) rOBin eH09-2f engine — CranksHaft, pistOn assy. PAGE 44 — MTR40SF RAMMER — OPERATION AND PARTS MANUAL — REV. #5 (11/01/11) ROBIN EH09-2F ENGINE — CRANKSHAFT AND PISTON ASSY. 350 380 380 310 320 50 60 70 10 40 41 42 105 80 370...
Page 46 - ROBIN EH09-2F ENGINE — INTAKE AND EXHAUST ASSY.
page 46 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) rOBin eH09-2f engine — intake, exHaust assy. PAGE 46 — MTR40F RAMMER — OPERATION AND PARTS MANUAL — REV. #4 (02/08/11) ROBIN EH09-2F ENGINE — INTAKE AND EXHAUST ASSY.
Page 51 - SELF LOCK NUT
MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) — page 51 rOBin eH09-2f engine — air Cleaner assy. no. paRT no. paRT naMe QTy. ReMaRks C 20F3260300 AIR CLEANER ASSY. .......................................1................INCLUDES ITEMS W/# 500# 20F3265108 PACKING, CLEANER/09-2F 1 5...
Page 54 - rOBin eH09-2f engine — BlOwer HOusing assy.; ROBIN EH09-2F ENGINE — BLOWER HOUSING ASSY.; Separate sale
page 54 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) rOBin eH09-2f engine — BlOwer HOusing assy. PAGE 54 — MTR40SF RAMMER — OPERATION AND PARTS MANUAL — REV. #5 (11/01/11) ROBIN EH09-2F ENGINE — BLOWER HOUSING ASSY. 60 80 110 10 20 40 41 220 216 Separate sale Separate sale
Page 56 - rOBin eH09-2f engine — reCOil starter assy.; ROBIN EH09-2F ENGINE — RECOIL STARTER ASSY.
page 56 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) rOBin eH09-2f engine — reCOil starter assy. PAGE 56 — MTR40SF RAMMER — OPERATION AND PARTS MANUAL — REV. #5 (11/01/11) ROBIN EH09-2F ENGINE — RECOIL STARTER ASSY. A 1 2 3 4 5 6 7 8 11 24 25 49 230 Separate sale
Page 58 - rOBin eH09-2f engine — eleCtriC deviCe assy.; ROBIN EH09-2F ENGINE — ELECTRIC DEVICE ASSY.
page 58 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) rOBin eH09-2f engine — eleCtriC deviCe assy. PAGE 58 — MTR40SF RAMMER — OPERATION AND PARTS MANUAL — REV. #5 (11/01/11) ROBIN EH09-2F ENGINE — ELECTRIC DEVICE ASSY. 11 60 70 75 30 100 10 110
Page 59 - FLYWHEEL CP
MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) — page 59 rOBin eH09-2f engine — eleCtriC deviCe assy. no. paRT no. paRT naMe QTy. ReMaRks 10 2847933021 FLYWHEEL CP 1 11 2847943021 IGNITION COIL CP 1 30 0011706250 BOLT & WASHER ASSY. 2 60 0660000471 SWITCH ASSY. 1 70 0043504120 ...
Page 60 - rOBin eH09-2f engine — aCCessOries
page 60 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) rOBin eH09-2f engine — aCCessOries PAGE 60 — MTR40SF RAMMER — OPERATION AND PARTS MANUAL — REV. #5 (11/01/11) ROBIN EH09-2F ENGINE — ACCESSORIES ASSY.
Page 61 - ACCESSORY TOOL KIT
MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) — page 61 no. paRT no. paRT naMe QTy. ReMaRks 10 2269030710 ACCESSORY TOOL KIT 1 rOBin eH09-2f engine — aCCessOries
Page 62 - terMs and COnditiOns Of sale — parts
page 62 — MTX40sf RaMMeR • opeRaTion and paRTs Manual — Rev. #0 (11/28/12) terMs and COnditiOns Of sale — parts payMenT TeRMs Terms of payment for parts are net 30 days. fReigHT poliCy All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B....
Page 64 - OperatiOn and parts Manual; Your Local Dealer is:; HERE’S HOW TO GET HELP; PLEASE HAVE THE MODEL AND SERIAL; Canada
OperatiOn and parts Manual Your Local Dealer is: HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING United StateS Multiquip Corporate Office MQ Parts Department 18910 Wilmington Ave. Carson, CA 90746 Contact: [email protected] Tel. (800) 421-1244 Fax (310) 537-3927 80...
