Page 2 - PROPOSITION 65 WARNING
PAGE 2 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) PROPOSITION 65 WARNING
Page 3 - HERE'S HOW TO GET HELP; PARTS DEPARTMENT; NOTES
MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) — PAGE 3 HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBERON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 or 310-537-3700FAX: 800-672-7877 or 310-637-3284 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE 800-478-1244 or 310-537-3...
Page 4 - Terms and Condition of Sale; TABLE OF CONTENTS; Specification and part number are subject to
PAGE 4 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) MT85HS Rammer Proposition 65 Warning ......................................... 2Table Of Contents ................................................. 4Parts Ordering Procedures ................................... 5Safety Informat...
Page 5 - PARTS ORDERING PROCEDURES; Ordering parts has never been easier!; Choose from three easy options:; Order via Internet; Order; Order via Fax
MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) — PAGE 5 PARTS ORDERING PROCEDURES www .multiquip .com Ordering parts has never been easier! Choose from three easy options: WE ACCEPT ALL MAJOR CREDIT CARDS! When ordering parts, please supply: ❒ Dealer Account Number ❒ Dealer Name and...
Page 6 - SAFETY INFORMATION; SAFETY MESSAGES; DANGER
PAGE 6 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) SAFETY INFORMATION Do not operate or service the equipment before reading the entire manual. Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the safety messages a...
Page 7 - GENERAL SAFETY; RAMMER SAFETY
MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) — PAGE 7 SAFETY INFORMATION GENERAL SAFETY CAUTION NEVER operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective devices requir...
Page 8 - ENGINE SAFETY; FUEL SAFETY
PAGE 8 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) SAFETY INFORMATION ENGINE SAFETY DANGER The engine fuel exhaust gases contain poisonous carbon monoxide. This gas is colorless and odorless, and can cause death if inhaled. The engine of this equipment requires an adequate ...
Page 9 - TRANSPORTING SAFETY; ENVIRONMENTAL SAFETY
MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) — PAGE 9 SAFETY INFORMATION TRANSPORTING SAFETY CAUTION NEVER allow any person or animal to stand underneath the equipment while lifting. NOTICE Before lifting, make sure that the equipment parts (hook and vibration insulator) are n...
Page 10 - GENERAL INFORMATION
PAGE 10 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) Definition of Tamping Rammer The Mikasa MT-85HS Tamping Rammer is a powerfulcompacting tool capable of applying a tremendous force inconsecutive impacts to a soil surface. Its applications includesoil compacting for backfillin...
Page 11 - NOTE; SPECIFICATIONS
MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) — PAGE 11 NOTE Specifications are general and are subject to change without notice. If exactmeasurements are required, equipment should be weighed and measured. s n o i t a c i f i c e p S r e m m a R S H 5 8 - T M . 1 e l b a T s n o i...
Page 12 - COMPONENTS
PAGE 12 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) L1. A Returned Material Authorization must be approved by Multiquip prior to shipment. A copy of the Authorization must accompany the shipment to the designated Warehouse. A copy of the original Multiquip invoice to the custom...
Page 13 - damage to the rammer or personal injury.; Engine; Figure 4. Engine Oil Dipstick; Rammer Gearbox and Spring Cylinder Oil Bath; Check the oil level through the oil level sight glass (Figure 2); DO NOT; use your rammer until this section is thoroughly; Figure 2. Foot Housing Sight Glass; OPERATION
MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) — PAGE 13 Failure to understand the operation of the MT-60HS Tamping Rammer could result in severe damage to the rammer or personal injury. Engine 1. Fill the fuel tank (Figure 3 ) with unleaded gasoline. At the same time, check the eng...
Page 14 - Figure 7. Recoil Starter; ON; Figure 5. Fuel Cock and Choke Lever; Full Open
PAGE 14 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) 5. If engine fails to start, move the choke lever (Figure 5) to the half open position to avoid flooding. 6. Repeat steps 1 thru 5. 7. If t he engine does not star t af ter repeated attempts,check the spark plug for excess fue...
Page 16 - Maintenance; Perform the scheduled maintenance procedures as indicated:; DAILY; Remove or clean the filter at the bottom of the tank.; CLEANING THE OIL TANK; Remove the cock holder cover, oil hose, red and black lead; MAINTENANCE
PAGE 16 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) Maintenance Perform the scheduled maintenance procedures as indicated: DAILY ■ Thoroughly remove dirt and oil from the engine and controlarea. Clean or replace the air cleaner elements as necessary.Check and retighten all fast...
Page 17 - Figure 12. Air Cleaner
MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) — PAGE 17 2. Remove the bolts that secure the oil tank to the fuel tank, and drain all oil from the tank. 3. Remove cock holder, then clean strainer and cock holder in a kerosene solution. 4. Make sure every part is clean and dry, then ...
Page 18 - TROUBLESHOOTING
PAGE 18 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) G N I T O O H S E L B U O R T E N I G N E . 4 E L B A T M O T P M Y S M E L B O R P E L B I S S O P N O I T U L O S t r a t s o t t l u c i f f i D g u l p k r a p s t u b e l b a li a v a s i l e u F e l b a li a v a r e w o ...
Page 20 - SAMPLE PARTS LIST; REMARKS Column
PAGE 20 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) EXPLANATION OF CODES IN THE REMARKS COLUMN EXPLANATION OF CODES IN THE REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the...
Page 21 - MT-85HS Tamping Rammer; MT-85HS Tamping Rammer; SUGGESTED SPARE PARTS
MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) — PAGE 21 MT-85HS Tamping Rammer 1 to 3 Units Qty. P/N Description 1 ......... 956300130 .......... LEVER, THROTTLE LEVER1 ......... 956106040 .......... WIRE, THROTTLE ASSY1 ......... 402010110 .......... SPRING, RETURN3 ......... 3540...
Page 22 - NAMEPLATE AND DECALS; Mikasa
PAGE 22 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) NAMEPLATE AND DECALS Mikasa Mikasa MT-85HS 6 3650 ~ 3850 RPM NPA 90 1 2 3 4 NAMEPLATE 5 7 8 NPA-333 9 14 DO NOT ALLOW WATER TO ENTER FUEL AND OIL TANKS NPA-599 10 SAE 10W-30 MOTOR OIL 11 CAUTION NPA-91 J 12 ON NAP-484 NO OFF O...
Page 24 - CRANKCASE AND ENGINE ASSY.
PAGE 24 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) 72 CRANKCASE AND ENGINE ASSY.
Page 26 - GUIDE CYLINDER AND FOOT ASSY.
PAGE 26 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) EXCLUDES ITEMS 103, 104,106, & 107 GUIDE CYLINDER AND FOOT ASSY.
Page 28 - TANK AND HANDLE ASSY.
PAGE 28 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) TANK AND HANDLE ASSY. 9 9-1 9-2 9-3
Page 32 - ROBIN EC12HS ENGINE — CRANKCASE ASSY.
PAGE 32 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) ROBIN EC12HS ENGINE — CRANKCASE ASSY.
Page 34 - ROBIN EC12HS ENGINE — CRANKSHAFT AND PISTON ASSY.
PAGE 34 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) ROBIN EC12HS ENGINE — CRANKSHAFT AND PISTON ASSY.
Page 36 - ROBIN EC12HS ENGINE — GOVERNOR ASSY.
PAGE 36 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) ROBIN EC12HS ENGINE — GOVERNOR ASSY.
Page 38 - ROBIN EC12HS ENGINE — MUFFLER/AIR CLEANER ASSY.
PAGE 38 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) ROBIN EC12HS ENGINE — MUFFLER/AIR CLEANER ASSY.
Page 40 - ROBIN EC12HS ENGINE — CARBURETOR ASSY.
PAGE 40 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) ROBIN EC12HS ENGINE — CARBURETOR ASSY.
Page 42 - ROBIN EC12HS ENGINE — RECOIL STARTER ASSY.
PAGE 42 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) ROBIN EC12HS ENGINE — RECOIL STARTER ASSY.
Page 44 - ROBIN EC12HS ENGINE — ELECTRIC DEVICE ASSY.
PAGE 44 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) ROBIN EC12HS ENGINE — ELECTRIC DEVICE ASSY.
Page 46 - ROBIN EC12HS ENGINE — LOOSE PARTS
PAGE 46 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) ROBIN EC12HS ENGINE — LOOSE PARTS
Page 47 - ROBIN EC-12HS ENGINE — LOOSE PARTS ASSY.; PART NAME
MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) — PAGE 47 ROBIN EC-12HS ENGINE — LOOSE PARTS ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 0 0053204201 WOODRUFF KEY 1 2 0 402010110 COIL SPRING .................................. 1 .................. REPLACES 0830000010 3 0 1617260101 SW...
Page 48 - TERMS AND CONDITION OF SALE — PARTS
PAGE 48 — MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) TERMS AND CONDITION OF SALE — PARTS PAYMENT TERMS Terms of payment for parts are net 30 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. p...
Page 50 - OPERATION AND PARTS MANUAL; Your Local Dealer is:; HERE’S HOW TO GET HELP; PLEASE HAVE THE MODEL AND SERIAL; CANADA
OPERATION AND PARTS MANUAL Your Local Dealer is: HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office MQ Parts Department 18910 Wi lm i ngton A v e . C ars on, C A 90746 Cont a ct : mq@mult i qu i p.com T e l. (800) 421-1244 F a...
