Page 2 - SILICOSIS WARNING; silicosis/respiratory warnings
page 2 — CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) Grinding/cutting/drilling of masonry, concrete, metal andother materials with silica in their composition may giveoff dust or mists containing crystalline silica. Silica is abasic component of sand, quartz, brick cla...
Page 3 - notes
CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) — page 3 notes
Page 4 - table of contents; cVs series Vibrator Motor; component Drawings; NOTICE
page 4 — CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) table of contents cVs series Vibrator Motor Silicosis/Respiratory Warnings ................................ 2 Table Of Contents .................................................... 4 Parts Ordering Procedures ..........
Page 5 - parts orDering proceDures; ordering parts has never been easier!; choose from three easy options:; order via Internet; Order; order via Fax
CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) — page 5 parts orDering proceDures www .multiquip .com ordering parts has never been easier! choose from three easy options: We aCCept all maJoR CRedIt CaRds! when ordering parts, please supply: ❒ dealer account number ❒ deal...
Page 6 - general power tool safety warnings
page 6 — CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) general power tool safety warnings WaRnIng Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. save all warnings an...
Page 8 - noise anD Vibration figures; noise emissions; Sound pressure level: L; Vibration emissions; running idle in addition to the trigger time).
page 8 — CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) noise anD Vibration figures noise emissions It is recommended the operator wear hearing protection while operating the power tool.Sound pressure level at the work station: L pA = 82.5 dB (in accordance with EN ISO 11...
Page 9 - safety inforMation; saFetY messages; dangeR; Burn hazards; Symbol; Electric shock hazards
CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) — page 9 safety inforMation Do not operate or service the equipment before reading the entire manual. Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the safety...
Page 10 - geneRal saFetY
page 10 — CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) safety inforMation geneRal saFetY CautIon neVeR operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective de...
Page 11 - VIbRatoR motoR saFetY; eleCtRICal saFetY
CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) — page 11 safety inforMation VIbRatoR motoR saFetY dangeR alWaYs wear rubber insulated gloves and boots when holding the fl exshaft during operation. The possibility of electrocution exists causing equipment damage and seve...
Page 12 - power Cord/Cable safety; enVIRonmental saFetY/deCommIssIonIng
page 12 — CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) safety inforMation Before plugging the motor into a power source, alWaYs remove any wrenches or other tools from the motor, shaft, and head that were used for assembly. power Cord/Cable safety dangeR alWaYs use ...
Page 13 - specifications; table 1. Vibrator motor specifications
CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) — page 13 specifications table 1. Vibrator motor specifications Model# CV1a CV2a CV2b CV3a CV3b Horsepower 1 HP (0.746 kW) 2 HP (1.492 kW) 3 HP (2.238 kW) Weight 11 lbs (4989.5 g) 12.5 lbs (5669.9 g) 13.5 lbs (6123.5 g) RPM (...
Page 14 - DiMensions; Model
page 14 — CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) DiMensions table 3. dimensions Model CV1A CV2A CV2B CV3A CV3B Length 13.5 inches (343 mm) 13.5 inches (343 mm) 13.5 inches (343 mm) Width 8.75 inches (222.25 mm) 8.75 inches (222.25 mm) 8.75 inches (222.25 mm) Heigh...
Page 15 - general inforMation; FleXIble sHaFts; table 4. Vibrating Radius/Insertion spacing; Vibrating; R) and vibrator head spacing
CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) — page 15 general inforMation Multiquip's CV Series Vibrator Motors are designed to work with flex shafts and vibrator heads for consolidation of fresh concrete to ensure optimum strength and durability. See Table 2 for the r...
Page 16 - do not; Figure 3. Head Selection; eXtensIon CoRds
page 16 — CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) general inforMation When determining which head to choose it is important to access the application; mainly the dimensions of the application. Select the vibrator head based on its radiating radius characteristics. ...
Page 17 - setup; ConneCtIons; model; attaCHIng VIbRatIng Head to FleX-sHaFt; Figure 4. Attaching Vibrating Head to Flexshaft
CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) — page 17 setup ConneCtIons When connecting the vibrator motor to flex shaft and heads, use only the combination shown below in Table 6. table 6. shaft sizes model shaft Head max. shaft length CV1A FSN 900HD 1000HD 21 ft. CV2...
Page 18 - attaCHIng FleXsHaFt to dRIVe motoR; Figure 5. Connecting Flexshaft to Motor; InstallIng FsC sHaFt CoupleR; do not use the FSC shaft coupler on the FSN; Figure 6. FSC Coupler Installation
page 18 — CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) attaCHIng FleXsHaFt to dRIVe motoR 1. Pull upward on drive motor quick-disconnect knob. Insert coupler-end of flexshaft into drive motor housing. See Figure 5. 2. Make sure flexshaft has been seated securely. Releas...
Page 19 - operation; opeRatIon; Figure 7. Vibrator Head Insertion; do not use vibrator to move concrete laterally. This
CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) — page 19 operation opeRatIon Before connecting any of the flexible shafts referenced in this manual, please read all operating instructions relating to the drive motor associated with the flexshaft.Using the wrong drive moto...
Page 20 - Maintenance; dRIVe motoR maIntenanCe; Figure 8. Brush Length; bRonze WeaR busHIng ReplaCement; Figure 9. Bronze Wear Bushing
page 20 — CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) Maintenance dRIVe motoR maIntenanCe 1. Visually inspect the motor daily before use for defective or missing parts, and have repairs made before use. 2. Inspect brushes frequently and replace when they become worn to...
Page 21 - Figure 11. Cleaning Wire Core; do not use solvents to clean casing. Applying solvents; do not force casing full of grease. A tightly packed; do not pour oil on the; do not overfill. Too much oil in the vibrator head will
CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) — page 21 9. Use the core to push a cleaning patch through the casing to remove any old grease or foreign matter that may have accumulated inside the casing. 10. Thoroughly clean wire core (Figure 11) if it is being reused. A...
Page 22 - of the vibrator head casing.; Figure 13. Vibrator Head Diameter; table 7. Vibrator Head oil Capacity; Replace vibrator head if it is not within minimum wear; table 8. Vibrator Head Wear diameter
page 22 — CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) VIbRatoR Head WeaR (300 HouRs) 1. Periodically measure the outside diameter (Figure 13) of the vibrator head casing. Figure 13. Vibrator Head Diameter table 7. Vibrator Head oil Capacity Vibrating Hd. model oil Capa...
Page 23 - troubleshooting
CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) — page 23 troubleshooting table 9. troubleshooting (drive motor) symptom possible problem solution Motor Does Not Start No power to motor? Verify unit is plugged to proper outlet. Verify extension cords are properly plugged i...
Page 24 - explanation of coDe in reMarks coluMn; sample paRts lIst; RemaRKs Column
page 24 — CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) explanation of coDe in reMarks coluMn The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are...
Page 25 - note page
CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) — page 25 note page
Page 26 - Decals
page 26 — CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) Decals CV-3B2 VIBRATOR 230 1 10 50/60 19, 250 3 SERIAL NO.: XXX123456 CLASS 1 TOOL WARNING: TO REDUCE RISK OF INJURY READ INSTRUCTION MANUAL AMPERES: IPX-4 RATING 31D0
Page 27 - paRt name
CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) — page 27 Decals no. paRt no. paRt name QtY. RemaRKs 1 00100-46 DECAL, SAFETY ...............................................1................SAFETY ITEM 2 00100-44 DECAL, WARNING ............................................1...
Page 28 - Vibrator Motor housing assy.
page 28 — CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) Vibrator Motor housing assy. 1 1 8 2 3 6 8 5 9 1 1 1 TORQUE TO 30-50 IN.-LBS. (3.39 N-m to 5.65 N-m) NOTES: 1 4 4 4 14 16 15 7 7 12 17 11 18 4
Page 29 - HOUSING, PLASTIC WITH INSERTS
CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) — page 29 no. paRt no. paRt name QtY. RemaRKs 1 50125-03 END CAP, RUBBER 2 2 50125-07 HOUSING, PLASTIC WITH INSERTS 1 3 50125-08 HOUSING, PLASTIC WITHOUT INSERTS 1 4 52003-04 WASHER, FLAT 1/4" 6 5 52003-10 WASHER, LOCK M5...
Page 32 - terMs anD conDitions of sale — parts
page 32 — CV seRIes VIbRatoR motoR • opeRatIon and paRts manual — ReV. #0 (04/30/13) terMs anD conDitions of sale — parts paYment teRms Terms of payment for parts are net 30 days. FReIgHt polICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments ...
Page 34 - OperatiOn and parts Manual; Your Local Dealer is:; HERE’S HOW TO GET HELP; PLEASE HAVE THE MODEL AND SERIAL; United StateS; Canada
OperatiOn and parts Manual Your Local Dealer is: HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING United StateS Multiquip Corporate Office MQ Parts Department 18910 Wilmington Ave. Carson, CA 90746 Contact: [email protected] Tel. (800) 421-1244 Fax (310) 537-3927 80...
