Page 2 - PROPOSITION 65 WARNING
PAGE 2 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) PROPOSITION 65 WARNING
Page 3 - TABLE OF CONTENTS; Component Drawings; NOTICE
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 3 TABLE OF CONTENTS GBW/GBWE/GBS/GBP/GBHM/GBMPLighting System Proposition 65 Warning ........................................... 2Table Of Contents .................................................... 3Parts Ordering Pro...
Page 4 - PARTS ORDERING PROCEDURES; Ordering parts has never been easier!; Choose from three easy options:; WE ACCEPT ALL MAJOR CREDIT CARDS!; Order via Internet; Order; Order via Fax
PAGE 4 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) PARTS ORDERING PROCEDURES www .multiquip .com Ordering parts has never been easier! Choose from three easy options: WE ACCEPT ALL MAJOR CREDIT CARDS! When ordering parts, please supply: ❒ Dealer Account Number ❒ Dealer...
Page 5 - SAFETY INFORMATION; SAFETY MESSAGES; DANGER
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 5 SAFETY INFORMATION Do not operate or service the equipment before reading the entire manual. Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the safety m...
Page 6 - GENERAL SAFETY
PAGE 6 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) SAFETY INFORMATION GENERAL SAFETY CAUTION NEVER operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective devic...
Page 7 - LIGHTING SYSTEM SAFETY; LAMP SAFETY
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 7 SAFETY INFORMATION LIGHTING SYSTEM SAFETY DANGER NEVER use lighting system in rain, snow or areas of high humidity that could generate electrical storms. WARNING NEVER disconnect any emergency or safety devices. T ...
Page 8 - BALLOON SAFETY; GENERATOR SAFETY; Power Cord/Cable Safety
PAGE 8 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) SAFETY INFORMATION BALLOON SAFETY WARNING To prevent serious burns, NEVER touch or unzip the balloon envelope when the lamp is on. CAUTION ALWAYS keep the balloon away from sharp objects and excessive amounts of he...
Page 9 - LOADING AND UNLOADING
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 9 SAFETY INFORMATION LOADING AND UNLOADING Cart Type - With Lifi ting Hook If lighting system is equipped with a transport lifting hook, refer to the following safety information. CAUTION Before lifting, make sure that l...
Page 10 - SPECIFICATIONS; Specifi cations; Lamp
PAGE 10 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) SPECIFICATIONS Specifi cations Table 1. Model GBW/GBWE/GBS/GBP Input Voltage 120 VAC Max. Current 9.3 A @ 120 V Frequency 50-60 Hz Single-Phase Appropriate Generator 1700 Watts Lamp Lamp Type 1,000 Watt Metal Halide T...
Page 11 - Standard Balloon Height
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 11 DIMENSIONS (GBW/GBWE) A D B E C GBW Dimensions Table 2. Reference Letter Description Dimension inches (mm) A (GBW) Total Max. Height (with Standard Balloon) 158.3 (4,020) A (GBWE) Total Max. Height (with Standard Ball...
Page 13 - GBP Dimensions
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 13 DIMENSIONS (GBP) A B GBP Dimensions Figure 3. GBP Dimensions Table 4. Reference Letter Dimension inches (mm) A 35.43 (900) B 33.46 (850)
Page 14 - FOOTCANDLE PLOT; VALUES LISTED AS FOOTCANDLES
PAGE 14 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) FOOTCANDLE PLOT 10 5 2 1 .5 .25 VALUES LISTED AS FOOTCANDLES SCALE: 1 GRID = 50 FT. (15.24 METERS) Illumination Range Figure 4.
Page 15 - GENERAL INFORMATION; Extension Cord Gauge Selection
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 15 GENERAL INFORMATION The Multiquip GloBug GBW/GBWE, GBS, GBP are general- purpose, portable, glare-free lighting systems intended for emergency and remote lighting needs. It is universally adaptable to all AC power sup...
Page 16 - COMPONENTS; GBMP ONLY
PAGE 16 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) COMPONENTS 1 2 3 4 12 13 14 15 17 18 19 16 25 26 27 28 21 23 24 5 22 5 7 9 20 10 11 8 6 GBW/GBWE GBWE/GBHM/ GBMP ONLY GBHM GBMP GBP GBS GBW/GBWE/GBS/GBP Components Figure 5.
Page 18 - SETUP; Releasing Pentapod Buckle
PAGE 18 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) SETUP GBW/GBWE SETUP Set the GBW on a fi rm level surface where there is 1. enough space around the pentapod for the outriggers to be deployed. Remove the pentapod from the carrying case. The 2. pentapod outriggers ar...
Page 19 - GBS SETUP; Attach one of the clamps that come with the GBS to the; Clamp Attachment; Using a 19 mm wrench, tighten the locknut securely.; Distance Between Clamps; Attach the straight pole to the clamps. Tighten locknuts; Straight Pole Attachment; Place the offset pole (or an optional straight pole, if; Offset Pole Attachment; WARNING
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 19 SETUP GBS SETUP Attach one of the clamps that come with the GBS to the 1. external support pole. The clamps may be attached to vertical, horizontal, or angled pole. See Figure 11. Clamp Attachment Figure 11. Using a 1...
Page 21 - GBHM INSTALLATION; GBHM Installation
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 21 SETUP GBHM INSTALLATION The GBHM Hitch Mount can be used to attach a balloon/lamp assembly (GBP) to the hitch of a truck or similar vehicle. See Figure 21 for installation procedure. GBHM Installation Figure 21. REMOV...
Page 22 - GBMP INSTALLATION; GBMP Installation
PAGE 22 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) GBMP INSTALLATION The GBMP Plate Mount is attached to a trailer or similar vehicle to support the balloon/lamp assembly (GBP). See Figure 22 for installation procedure SETUP GBMP Installation Figure 22. TRAILER FRAME ...
Page 23 - OPERATION; Raise the second mast to the desired height and tighten; Raising the Second Mast; To raise the mast higher, raise the third mast until the; Raising the Third Mast; make sure the area above; electrical; Loosen the T-bolt holding the second mast and push; Lowering Second Mast; Push the lock/release tab on the third mast to release; Lowering Third Mast
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 23 OPERATION RAISING THE MAST (GBW/GBWE) Raise the second mast to the desired height and tighten 1. the T-bolt securely. See Figure 23. Raising the Second Mast Figure 23. To raise the mast higher, raise the third mast un...
Page 24 - APPLYING POWER; Connecting to Generator; SHUTDOWN; SHUTTING DOWN LAMP ONLY; Unzipping Balloon
PAGE 24 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) OPERATION APPLYING POWER If using a portable generator, plug the AC power cable 1. to the 120 VAC receptacle on the generator used. See Figure 27. Connecting to Generator Figure 27. Star t the generator as indicated i...
Page 25 - Unlocking the Latch; Stowing the Pentapod
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 25 STORAGE (GBW/GBWE) Before storing the GBW/GBWE Lighting System, perform the following steps. Disconnect the lamp connector from the AC power 1. cable. Unhook the AC power cable from the eyelet at the 2. bottom of the ...
Page 26 - MAINTENANCE; REPLACING LAMP; Exposing Balloon; Lamp Holder
PAGE 26 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) MAINTENANCE REPLACING LAMP \ Unzip the zipper at the bottom of the balloon and roll 1. the balloon up to expose the lamp. See Figure 35. Exposing Balloon Figure 35. Release the lamp guard locking tabs. See Figure 36. ...
Page 27 - REPLACING BALLOON; Replacing Balloon
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 27 MAINTENANCE Secure lamp holder on top of the lamp. 7. Reinstall lamp guard. 8. Pull down balloon and zip the bottom zipper to cover 9. lamp. REPLACING BALLOON U n z i p t h e t o p a n d b o t t o m o f t h e b a l l ...
Page 28 - FILTER REPLACEMENT; Accessing Filter; Locking Air Plate
PAGE 28 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) FILTER REPLACEMENT Remove the balloon as described in the STORAGE 1. section. Turn the balloon/lamp assembly upsidedown to access 2. the fi lter. See Figure 44. Accessing Filter Figure 44. Turn the three locking tabs ...
Page 29 - Troubleshooting
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 29 MAINTENANCE Troubleshooting Table 6. SYMPTOM POSSIBLE PROBLEM SOLUTION Lamp does not light. Is plug disconnected? Plug in correctly. Is generator power switched off? Turn on switch. Is lamp loose? Screw lamp securely ...
Page 30 - GBS; Maintenance Check Points
PAGE 30 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) MAINTENANCE L3 B3 B5 L4 L5 L1 L2 S1 S4 S3 S2 B2 B2 B1 B1 E1 E1 E2 E2 L2 L2 B4 B4 P4 P2 P3 P1 GBS GBW/GBWE Maintenance Check Points Figure 47.
Page 31 - Periodic Check and Maintenance
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 31 MAINTENANCE Periodic Check and Maintenance Table 7. FIGURE PART CHECK ITEM SOLUTION Lamp L1 Lamp (Base) Lamp base loose? Screw in securely. • L2 Connector Cable disconnected or loose? Connect securely. • L3 Lamp Holde...
Page 32 - WIRING DIAGRAM; ELECTRONIC; CONNECTOR
PAGE 32 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) WIRING DIAGRAM GRN/YEL 10 AWG ELECTRONIC BALLAST POWER CABLE (120 VAC INPUT) CONNECTOR (MALE) CONNECTOR (FEMALE) G FRONT VIEW 3 2 1 BLK 1 GRN/YEL BLK 2 GRN/YEL GRN/YEL NEUTRAL LINE FAN MOTOR TABLE 3 REFERENCE DESIGNAT...
Page 33 - NOTES
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 33 NOTES
Page 34 - EXPLANATION OF CODE IN REMARKS COLUMN; SAMPLE PARTS LIST; REMARKS Column
PAGE 34 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are a...
Page 35 - SUGGESTED SPARE PARTS; Description
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 35 SUGGESTED SPARE PARTS GBW/GBWE/GBS/GBP LIGHTING SYSTEM 1 to 3 units Qty. P/N Description 2............E000077600 ......... LAMP2............A300168900 ......... E BALLAST ASSY2............A100057000 ......... BALLOON ...
Page 36 - GloBug Lighting System
PAGE 36 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) NAMEPLATES AND DECALS (GBW/GBWE) A-4001940-00 To prevent breaking, use in strong winds that makes NEVER balloon deformed considerably. the lighting system. WORKSTAND DEPLOYMENT A - - 00 4001941 A - - 00 4001938 TM Glo...
Page 37 - DECAL GLOBUG INFORMATION
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 37 NO. PART NO. PART NAME QTY. REMARKS 1 A400193800 DECAL; GLOBUG INFORMATION 1 2 DCL1262 DECAL; LATCH (RIGHT) 1 3 A400194300 DECAL; LATCH (LEFT) 1 4 A400194000 DECAL; CAUTION, LAMP INFORMATION 1 5 A400193900 DECAL; LAMP...
Page 39 - DECAL GLOBUG LIGHTING SYSTEM
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 39 NAMEPLATES AND DECALS (GBS) NO. PART NO. PART NAME QTY. REMARKS 1 A400193300 DECAL; GLOBUG LIGHTING SYSTEM 1 2 A400194200 DECAL; GLOBUG INFORMATION (GBS) 1 3 A400194000 DECAL; CAUTION, LAMP INFORMATION 1 4 A400166800 ...
Page 43 - MAST
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 43 MAST ASSY (GBW/GBWE) NO. PART NO. PART NAME QTY. REMARKS 1 A300169400 THIRD MAST 1 2 A300169300 SECOND MAST 1 3 A300169200 FIRST MAST 1 4 A400187600 KNOB 2 5 A000017000 PLUG 1 6 A400112700 LEAF VALVE 1 7 0023105008 SC...
Page 45 - BASE PIPE 1
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 45 PENTAPOD ASSY (GBW/GBWE) NO. PART NO. PART NAME QTY. REMARKS 1 A200041502 BASE PIPE 1 1 2 A300166700 BASE PIPE 2 ASSY 1 3 A300113102 SUPPORT 5 4 A300108700 SHACKLE 1 5 1641000330 RUBBER FOOT 5 6 0014708025 BUTTON SCRE...
Page 47 - POLE
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 47 POLE ASSY (GBS) NO. PART NO. PART NAME QTY. REMARKS 1# A200056701 OFFSET POLE 1 2# A300166600 POLE 1 3# E000077100 KNOB 1 4# E000077200 CLAMP 2 5# 0013112030 BOLT (M12x30) 1 6# 0033112000 NUT (M12) 1 7 A000028100 POLE...
Page 49 - CP
GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 49 HITCH MOUNT ASSY (GBHM) NO. PART NO. PART NAME QTY. REMARKS 1# A300164601 SHAFT (JOINT) 1 2# A300164501 JOINT CP 1 3# A300166600 POLE 2 4# 0033112000 NUT (M12) 4 5# 0013112040 BOLT (M12x40) 4 6 GBHM HITCH MOUNT .........
Page 52 - TERMS AND CONDITIONS OF SALE — PARTS
PAGE 52 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) TERMS AND CONDITIONS OF SALE — PARTS PAYMENT TERMS Terms of payment for parts are net 30 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments ar...
Page 54 - OPERATION AND PARTS MANUAL; Your Local Dealer is:; HERE’S HOW TO GET HELP; PLEASE HAVE THE MODEL AND SERIAL; UNITED STATES; CANADA
OPERATION AND PARTS MANUAL Your Local Dealer is: HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING © COPYRIGHT 2009, MULTIQUIP INC. Multiquip Inc and the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written ...
