Monarch 314 Datalogging Humidity Temperature Meter - Manual

Page 2 - Safeguards and Precautions; Do not touch or manipulate the sensor.; LIMITED WARRANTY

Safeguards and Precautions 1. Read and follow all instructions in this manualcarefully, and retain this manual for future reference. 2. Do not use this instrument in any manner inconsistentwith these operating instructions or under anyc o n d i t i o n s t h a t e x c e e d t h e e n v i r o n m e n...

Page 3 - Table of Contents; Section Page; DECLARATION OF CONFORMITY; Monarch Instrument; Division of Monarch International Inc.; Humidity Temperature Meter; Alan Woolfson, VP Engineering

MODEL 314 DATALOGGING HUMIDITY TEMPERATURE METER Table of Contents Section Page 1.0 Introduction ................................................................................................................. 1 2.0 Specifications .......................................................................

Page 4 - Operating Conditions:; Notes

MODEL 314 DATALOGGING HUMIDITY TEMPERATURE METER 1 1.0 Introduction This instrument is a dual channel, recording digital Humidity / Temperature meter providing simultaneous display of ambient humidity and temperature on the first channel, and a wide range temperature only measurement on the second c...

Page 5 - Symbol Definitions and Feature Locations:

MODEL 314 DATALOGGING HUMIDITY TEMPERATURE METER 2 3.0 Symbol Definitions and Feature Locations: : Low battery indication. Battery voltage is not sufficient for proper operation. : Indicates ‘Auto Power Off’ is enabled : Indicates that the display data is being held MAX : The Maximum value is now be...

Page 6 - Data Sets

MODEL 314 DATALOGGING HUMIDITY TEMPERATURE METER 3 4.0 Operating Instructions: 4.1 Preparation for Measurement Measurement of ambient humidity and temperature (T1) may be made with the probe clipped to the instrument or hand held remotely. For measurement of a second temperature, plug a Type K therm...

Page 7 - TestLink; Menu and Tool Bar

MODEL 314 DATALOGGING HUMIDITY TEMPERATURE METER 4 4.8 Recording Interval Setup To set the recording interval: 1. Press and hold the MAX MIN button and then power on the meter. 2. Press HOLD (interval). 3. Press REC ( n ) or °C/°F ( p ) to increase or decrease the number. 4. Press HOLD to advance to...

Page 8 - Procedure

MODEL 314 DATALOGGING HUMIDITY TEMPERATURE METER 5 Appendix: Thermocouple Probe Specifications Model Range Tolerances Description TP-K01 Wire probe -50°C to 200°C -58°F to 392°F ±2.2°C or ±0.75% ±3.6°F or ±0.75% Teflon insulation. Maximum insulation temperature: 260°C (500°F) TP-K01: Probe for gener...

Monarch 314 Datalogging Humidity Temperature Meter - Manual

Table of Contents:

Summary

Other Monarch Models