Monarch 9401 - Manuals

NOTE: The keyboard cable is marked with the word "TOP" to help you connect it to the printer. 4. Connect the power cord to the socket as shown. Plug the other end of the cord into a grounded 110VAC electrical outlet. 9401/9402 Equipment Manual 4

3. Using the Keys Both printers have a display (with two 16-character lines) andfive function keys. The 9402 printer has 16 additional keys toallow off-line data entry. For information on printing dataoff-line, refer to the 9401/9402 Operator’s Handbook. On the Keypad Interrupts printing. Returns th...

On the Computer Keyboard You can attach an optional computer keyboard to the 9401 or9402 printers. The computer keyboard looks something likethis: Some of the function keys on a computer keyboardcorrespond to the function keys on the printer keypad. Function Printer Keypad Key Equivalent F1 1 F2 2 F...

4. Loading Supplies The 9401/9402 printers print on • Tags, which can be fed out the exit chute in one strip(see "Continuous Printing"). • Labels, which can be fed out the exit chute: − in one strip (see "Continuous Printing"). − one at a time while the backing paper rewinds insideth...

Supply Loading Diagram The illustration below shows the correct routing for supplies,ribbon, and backing paper. NOTE: Guide the ribbon around the ribbon guide rollers when loading. PrintedSupply BackingPaper RibbonGuideRollers Ribbon Supply GuideRoller SupplyGuide SupplyPlatter Fr on t of P ri n te ...

Continuous Printing 1. Open the printer cover by lifting the handle and pulling it completely around the top of the printer. 2. Move the printhead lever as shown to open the printhead. NOTE: If you are loading supplies for the first time, skip steps 3 - 7. If you are replacing supplies, followall th...

5. Pull the wire clip off the backing paper take-up reel as shown. 6. Slide the backing paper off the wire clip. 7. Replace the wire clip on the backing paper take-up reel. Wire Clip 4. Loading Supplies 11

8. Slide the supply guide to the top of the supply guide roller. 9. Remove the seal from the new roll of supplies. 10. Remove the first label from the backing paper. 11. Place the roll of supplies on the supply platter. 12. Feed the supply through the supply sensor, past the printhead, and up to the...

8. Slide the supply guide to the top of the supply guide roller. 9. Remove the seal from the new supply roll. 10. Remove the first label from the backing paper. 11. Place the supply roll on the supply platter. 12. Feed the supply through the supply sensor, past the printhead, and out the front of th...

18. Slide the supply guide down the supply guide roller until it just touches the edge of the supply. 19. Close the printhead by turning the printhead lever as shown. 20. Close the printer cover. PrintheadLever SupplyGuide 4. Loading Supplies 17

5. Loading the Ribbon 1. Open the cover by lifting the handle and pulling it completely around the top of the printer. 2. Move the printhead lever as shown to open the printhead. 3. Rewind the supplies back onto the roll. If backing paper is rewound on the take-up reel, tear it as described in"L...

9. Guide the ribbon down between the printhead and the front of the printer and around the rollers as shown. 10. Place the take-up core (empty core) on the ribbon take-up reel. 11. Gently slide the ribbon cores onto the reels while guiding the ribbon around the printhead. 12. Press down firmly on th...

6. Cleaning the Printhead and Platen Roller WARNING Turn the power Off and unplug the cord before cleaning. 1. Open the cover by lifting the handle and pulling it completely around the top of the printer. 2. Move the printhead lever as shown to open the printhead. 3. Wind the supplies back onto the ...

5. Lightly moisten a cotton swab with rubbing alcohol. 6. Rub the swab up and down the printhead as shown. Clean the platen roller the same way. 7. Re-load the supply roll and ribbon, if necessary. 8. Close the printhead. 9. Close the printer cover. 10. Turn the power On. 11. If printing is not impr...

7. Replacing the Fuse CAUTION As a safety measure, be sure to turn the printer Off andunplug the power cord. 1. Turn the printer Off and unplug the power cord. Facing the back of the printer, press and turn the fusecover as shown until it pops out. 3. Pull the fuse out of the cover. 4. Insert a 1.5 ...

5. Line up the notches in the fuse cover with the slots in the receptacle and insert the fuse. 6. Push the fuse cover and turn as shown until it locks in place. 7. Plug in the power cord. 9401/9402 Equipment Manual 26

8. Troubleshooting If you have a problem that isn’t listed, see the 9401 Messages Manual or call Monarch Service. Problem Corrective Action The display is blank afteryou turn On the printer. Turn the printer Off and make surethe power cord is properly pluggedinto the printer and a grounded 110VAC re...

9. Specifications Printer Length: 16.5 inches (419 mm) Width: 10.5 inches (267 mm) Height: 9 inches (229 mm) Weight: 15.5 lbs. (7.05 kg) Shipping Weight: 22 lbs. (10 kg) Power: Domestic: 115 VAC, 80W, .7A, 60 Hz.International: 220 VAC, 80W, .35A, 50 Hz. Fuse: 1.5 amp, 250V slow blow Normal operation...

Relative humidity: Operating 10% to 80% (no condensation) Storage 5% to 90% Ribbon widths: 1.26 inches (32.0 mm)1.57 inches (39.88 mm)2.10 inches (53.34 mm) Ribbon length: 308.4 feet (94 meters) Ribbon storage: 41˚F to 95˚F (5˚C to 35˚C). DO NOT leaveribbons in direct sunlight, high temperatures,or ...