Moen INS235A - Manual
Moen INS235A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – INSTALLATION INSTRUCTIONS; TUB SPOUT INSTALLATION; TO INSTALL SLIP FIT SPOUT:; INSTALL SHOWER ARM; TO INSTALL SLIP FIT SHOWER ARM:
- Page 5 – clockwise
- Page 8 – your area
- Page 9 – conformément aux directives fournies.; FRANÇAIS; CE ROBINET
- Page 10 – INSTRUCCIONES DE INSTALACIÓN; INSTALACIÓN DEL SURTIDOR DE LA TINA
- Page 11 – INSTALACIÓN DE LA
- Page 14 – MOEN GARANTIA LIMITADA DE VIDA; certificado en su área; LINEAS TELEFONICAS; INFORMACION AL CONSUMIDOR
- Page 15 – temperatura del agua de acuerdo con las instrucciones.; ESPAÑOL
- Page 16 – INSTALLATION DU BRAS DE DOUCHE; Appuyer sur le bras de douche; INSTALLATION DE LA POMME DE DOUCHE; DIRECTIVES D’INSTALLATION; Pour savior quels sont les outils utiles voir la page 1.; INSTALLATION DU BEC DE BAIGNOIRE; Appuyer et faire pivoter le bec de baignoire
- Page 20 – APPELER SANS FRAIS NOTRE
IMPORTANT INSTRUCTIONS TO THE INSTALLER:
PLEASE READ THESE INSTRUCTIONS, FILL IN THE BLANKS BELOW,
THEN PROVIDE THE INSTRUCTIONS TO THE USER BY SECURELY
TAPING THEM TO THE FLOW HANDLE OR THE ESCUTCHEON.
WARNING: Risk of scalding
Varying the calibration of this thermostatic valve to increase water
temperature increases the risk of injury from scalding. The installer is
responsible for installing the valve and any recalibration of the water
temperature in accordance with the instructions.
CAUTION: Danger of scald injury. Valve can be recalibrated to
provide higher temperature water.
This valve has been preset at the factory to provide a range of water
temperatures. Any change in settings or water inlet conditions from
those used during calibration at the factory may raise the outlet
temperature and may cause scalding. The responsibility for the
proper installation and any recalibration of this valve lies with the
installer.
TWO HANDLE THERMOSTATIC TUB/SHOWER FAUCET
T3428, T3428CP, T3428CPM, T3428STV, T3428NLBL, T3428CGPC,
T3428CGSA, T3429, T3429CP, T3429CPM, T3429STV, 3429NLBL,
T3429CGPC, T3429CGSA, T3431, T3431CP, T3431CPM, T3431STV,
T3431NLBL, T3431CGC, T3134CGSA
ENGLISH
INS235A
THIS THERMOSTATIC VALVE HAS BEEN PRESET
BY
OF
TO A MAXIMUM WATER DISCHARGE TEMPERATURE OF
______ºF. ANY CHANGE TO THIS SETTING MAY RAISE THE
DISCHARGE TEMPERATURE AND COULD CAUSE SCALDING.
DATE:__________
!
Complies with: ASME A112.18.1M, CSA B125, & ASSE 1016
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
INSTALLATION INSTRUCTIONS 2 3 / 4 - 3 3 / 4 " Lookout Pipe Finished Wall 8 3 2 2-3" 2-3" TUB SPOUT INSTALLATION 1/2” copper lookout (pipe protruding from wall)must be 2 3/4" (70mm) min. to 3 3/4" (95mm)max. in length and be free of deep scratches,dents, kinks or bends. The cutoff...
ATTACH BASE ESCUTCHEON:1. Turn off main hot and cold water supply tovalve. 2. Turn temperature extension near top of valvebody counter-clockwise until it stops (it may already be in the full counter-clockwiseposition). 3. Turn white flow extension near bottom ofvalve body clockwise until it stops (i...
7 MOEN LIFETIME LIMITED WARRANTY CONSUMER INFORMATION Moen products have been manufactured under the highest standards of quality and workmanship. Moen warrants to the original consumer purchaser for as long as the original consumer purchaser owns their home(the “Warranty Period” for homeowners), th...
