Moen 6410 SERIES - Manual
Moen 6410 SERIES – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Lift
Rod
3/4”
(19mm)
Max. Deck
Thickness
Cold
1/2" NPT
Hot
1/2" NPT
4“
(102mm)
4-1/4“
(108mm)
4“
(102mm)
3“
(76mm)
3-7/8“
(98mm)
6-3/16“
(157mm)
DESCRIPTION
•
Metal construction with various finishes identified by suffix
•
1/2" IPS connections
•
Includes metal pop-up waste assembly
OPERATION
•
Lever style handles
•
Maximum handle(s) rotation angle is 90˚ to full on
•
Rotate hot side counterclockwise to open (clockwise to close)
•
Rotate cold side clockwise to open (counterclockwise to close)
FLOW
•
Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
for products made before October 2008 flow is limited to
2.2 gpm max (8.3 L/min)
CARTRIDGE
•
1224 cartridge design
•
Nonmetallic and stainless steel material
STANDARDS
•
Third party certified to WaterSense,® CSA B125, ASME A112.18.1M,
ANSI A117.1, and all applicable requirements referenced therein
•
Certified to ANSI/NSF 61/9
•
Complies with California Proposition 65 and with the
Federal Safe Drinking Water Act
• ADA
for lever handle
WARRANTY
•
Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
•
5 year warranty if used in commercial installations
Rev. 7/08
EVA™
4" Lavatory Faucet
with Metal Waste Assembly
Models:
6410 series
Bulk Models:
66410, 66411*
(Bulk packed 6 per carton),
50/50 waste assembly
*Includes hot (red) and cold (blue) indicators.
NOTE:
THIS FAUCET IS DESIGNED TO BE
INSTALLED THRU 3 HOLES, 1" MIN. DIA.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
