Mitsubishi PFC-AK51BC- User Manual

Mitsubishi PFC-AK51BC

Mitsubishi PFC-AK51BC– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
Page: / 40

Table of Contents:

  • Page 4 – Coil frost prevention; MS MICROPROCESSOR CONTROL
  • Page 7 – Indoor fan speed control; In AUTO the fan speed is as follows.; Thermostat control; The indoor fan maintains the actual speed of the moment.; Low outside temperature operation; door fan rotation does not stop.; MSZ, MSY MICROPROCESSOR CONTROL
  • Page 9 – Gradation of fan speed in initial
  • Page 10 – Time chart of defrosting in HEAT mode (reverse type)
  • Page 11 – MUZ
  • Page 12 – Function of main parts
  • Page 17 – -8. OPERATIONAL FREQUENCY CONTROL OF OUTDOOR UNIT
  • Page 19 – Other models; (a) Reference value of target discharge temperature; Applied model
  • Page 20 – is repeated as shown in the graph until the breaker is turned OFF.; NOTE; heat control is turned ON.; Power; or more
  • Page 21 – MXZ MICROPROCESSOR CONTROL
  • Page 27 – and
  • Page 31 – -5. DISCHARGE TEMPERATURE PROTECTION CONTROL
  • Page 32 – COOL
  • Page 33 – Compressor uses 50 W when pre-heat control is turned ON.; Coil frost prevention; ON
  • Page 35 – MFZ MICROPROCESSOR CONTROL; speed becomes Very Low. In AUTO the fan speed is as follows.
  • Page 36 – Fan speed
  • Page 37 – -4. AUTO CHANGE OVER ··· AUTO MODE OPERATION; In case of the following conditions, the operation mode is changed.
  • Page 38 – (1) Cold air prevention in HEAT operation; Indoor fan motor (Lower) in COOL OPERATION; operation is performed in table D~H for more cooling.
Loading the manual

SERVICE TECHNICAL GUIDE

CONTENTS

1. MS MICROPROCESSOR CONTROL ·················· 4
2. MSZ, MSY MICROPROCESSOR CONTROL ······7
3. MXZ MICROPROCESSOR CONTROL ·············· 21
4. MFZ MICROPROCESSOR CONTROL ·············· 35

SPLIT-TYPE AIR CONDITIONERS

No. OBT16

REVISED EDITION-G

Please void OBT16 REVISED EDITION-F.

Revision G:

MSZ-FE18NA, MSZ-GE24NA and MSY-GE24NA

have been added.

Models

MS-A•WA

· MU-A•WA

MSZ-A•NA

· MUZ-A•NA, -

U

MSY-A•NA

· MUY-A•NA

MSZ-FD•NA

· MUZ-FD•NA, -

U

MSZ-FE•NA

· MUZ-FE•NA

MSZ-D•NA

· MUZ-D•NA, -

U

MSY-D•NA

· MUY-D•NA

MSZ-GA•NA

· MUZ-GA•NA, -

U

MSY-GA•NA

· MUY-GA•NA

MSZ-GE•NA

· MUZ-GE•NA

MSY-GE•NA

· MUY-GE•NA

MFZ-KA•NA

·

MXZ-A•NA, -

1

, -

2

·

MXZ-B•NA, -

1

CONFIDENTIAL
(FOR INTERNAL USE ONLY)

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 4 - Coil frost prevention; MS MICROPROCESSOR CONTROL

4 1-1. COOL ( ) OPERATION 2. Indoor fan speed control Indoor fan operates continuously at the set speed by FAN SPEED CONTROL button regardless of the thermostat's OFF- ON. In AUTO the fan speed is as follows. 1. Thermostat control Thermostat turns ON or OFF by the difference between room temperature...

Page 7 - Indoor fan speed control; In AUTO the fan speed is as follows.; Thermostat control; The indoor fan maintains the actual speed of the moment.; Low outside temperature operation; door fan rotation does not stop.; MSZ, MSY MICROPROCESSOR CONTROL

7 2-1. COOL ( ) OPERATION 2. Indoor fan speed control Indoor fan operates continuously at the set speed by FAN SPEED CONTROL button regardless of the thermostat's OFF- ON. In AUTO the fan speed is as follows. 1. Thermostat control Thermostat turns ON or OFF by the difference between room temperature...

Page 9 - Gradation of fan speed in initial

9 (2) Cold air prevention control MSZ-A09/12/15/17 MSZ-FD MSZ-FE MSZ-D MSZ-GE When the compressor is not operating, ( ) if the temperature of room temperature thermistor is less than 66°F (19°C), the fan stops. ( ) if the temperature of room temperature thermistor is 66°F (19°C) or more and ( ) if t...

Other Mitsubishi Models