Mitsubishi Mr.Slim SEZ-KD09- User Manual

Page 2 - Symbols used in the text; : Indicates a part which must be grounded.; Disposing of the unit

2 Contents s Before installing the unit, make sure you read all the “SafetyPrecautions”. s The “Safety Precautions” provide very important points regard-ing safety. Make sure you follow them. s Please report to or take consent by the supply authority be-fore connection to the system. 1. Safety Preca...

Page 3 - Wired Remote-Controller; Display Section; ̊F ̊C; Operation Section; OPERATION

3 ■ Wired Remote-Controller Display Section For information purposes, all partsof the display are shown as lit.During actual operation, only therelevant items will be lit. ˚F˚C ˚F˚C ERROR CODE AFTER TIMER TIME SUN MON TUE WED THU FRI SAT ON OFF Hr AFTER FILTER FUNCTION ONLY1Hr. WEEKLY SIMPLE AUTO OF...

Page 4 - Screen Configuration; Outdoor unit; before pressing the Filter; Setting the Day of the Week and Time

4 2. Parts Names Note: ● The day and time will not appear if clock use has been disabled at the Func-tion Selection of remote controller. ● After the power supply returns, the indoor unit does not operate for threeminutes. Above operation is normal. ● If the setting 1 1 1 1 1 or 2 2 2 2 2 is set, th...

Page 5 - Description of “AUTO RESTART FUNCTION”; When the unit is restarted, initial settings are as follows.; Automatic operation; Cooling mode; To decrease the room temperature:

5 ˚F ˚F PAR-21MAA ON/OFF FILTER CHECK OPERATION CLEAR TEST TEMP. MENU BACK DAY MONITOR/SET CLOCK ON/OFF 2 7 2 3 3 8 645 8 7 1 15 6 5. Operation 5.1. Description of “AUTO RESTART FUNCTION” • This unit is equipped with the auto restart function. When the main power is turned on, the air conditioner wi...

Page 6 - Day Setting; For LOSSNAY combination; Setup Matrix

6 5. Operation 6.1. For Wired Remote-controller This section explains how to set and use the timer. You can use FunctionSelection of remote controller to select which of three types of timer to use: 1 Weekly timer, 2 Simple timer, or 3 Auto Off timer. For information about how to set the Function Se...

Page 7 - Be sure that the; Timer Settings; Timer Setting

7 6. Timer 5. Press the appropriate Set Time button A as necessary to set the desired time (at 5 ). * As you hold the button down, the time first increments in minute inter- vals, then in ten-minute intervals, and then in one-hour intervals. 6. Press the ON/OFF button 1 to select the desired operati...

Page 8 - before

8 6. Timer 7. After completing steps 3 to 6 above, press the Filter button 4 to lock in the value. Note:Your new settings will be cancelled if you press the Mode (Return) button 2 before pressing the Filter button 4 . 8. Press the Mode (Return) button 2 to return to the standard control screen. 9. P...

Page 9 - seconds; Lock Indicator; function limit controller); Other indications

9 6. Timer <Checking the Current Auto Off Timer Setting> 1. Be sure that the “Auto Off” is visible on the screen (at 1 ). 2. Hold down the Timer Menu button B for 3 seconds , so that “Monitor” is indicated on the screen (at 4 ). • The timer remaining to shutdown appears at 5 . 3. To close the ...

Page 10 - Error Code; Function Selection; Function selection of remote controller

10 7. Other Functions ON/OFF ERROR CODE If you have entered contact number to be called in the event of a prob-lem, the screen displays this number. (You can set this up under Func-tion Selection of remote controller. For information, refer to section 8.) Indoor Unit’sRefrigerantAddress Error Code I...

Page 14 - This indication is not available for wireless remote controller.; Temperature display

14 ON/OFF TEMP. ˚F ˚F FILTER ■ Indicates that the filter needs cleaning.Clean the filter. ■ When resetting “FILTER” displayWhen the [FILTER] button is pressed two times successively aftercleaning the filter, the display goes off and is reset. Note: ● When two or more different types of indoor unit a...

Page 16 - Installation Area; TV; Installation, relocation and inspection; Electrical work

16 Installation Area Avoid installing the air conditioner in the following places.• Where flammable gas could leak. Caution: Do not install the unit in an area where flammable gas could leak.If gas leaks and collects around the unit, it may cause an explosion. • Where there is a lot of machine oil i...

Page 17 - Outdoor; Guaranteed operating range

17 Also consider operation sound • Do not put an object around the air outlet of the outdoor unit. It may cause lowering of capacity or increase operating sound.• If abnormal sound is heard during operation, consult your dealer. Relocation • When the air conditioner is to be removed or reinstalled b...

Mitsubishi Mr.Slim SEZ-KD09- User Manual

Table of Contents:

Summary

Other Mitsubishi Models