Mitsubishi Mr.Slim SEZ-KD09- Manuals

5 ˚F ˚F PAR-21MAA ON/OFF FILTER CHECK OPERATION CLEAR TEST TEMP. MENU BACK DAY MONITOR/SET CLOCK ON/OFF 2 7 2 3 3 8 645 8 7 1 15 6 5. Operation 5.1. Description of “AUTO RESTART FUNCTION” • This unit is equipped with the auto restart function. When the main power is turned on, the air conditioner wi...

6 5. Operation 6.1. For Wired Remote-controller This section explains how to set and use the timer. You can use FunctionSelection of remote controller to select which of three types of timer to use: 1 Weekly timer, 2 Simple timer, or 3 Auto Off timer. For information about how to set the Function Se...

7 6. Timer 5. Press the appropriate Set Time button A as necessary to set the desired time (at 5 ). * As you hold the button down, the time first increments in minute inter- vals, then in ten-minute intervals, and then in one-hour intervals. 6. Press the ON/OFF button 1 to select the desired operati...

8 6. Timer 7. After completing steps 3 to 6 above, press the Filter button 4 to lock in the value. Note:Your new settings will be cancelled if you press the Mode (Return) button 2 before pressing the Filter button 4 . 8. Press the Mode (Return) button 2 to return to the standard control screen. 9. P...

9 6. Timer <Checking the Current Auto Off Timer Setting> 1. Be sure that the “Auto Off” is visible on the screen (at 1 ). 2. Hold down the Timer Menu button B for 3 seconds , so that “Monitor” is indicated on the screen (at 4 ). • The timer remaining to shutdown appears at 5 . 3. To close the ...

10 7. Other Functions ON/OFF ERROR CODE If you have entered contact number to be called in the event of a prob-lem, the screen displays this number. (You can set this up under Func-tion Selection of remote controller. For information, refer to section 8.) Indoor Unit’sRefrigerantAddress Error Code I...

14 ON/OFF TEMP. ˚F ˚F FILTER ■ Indicates that the filter needs cleaning.Clean the filter. ■ When resetting “FILTER” displayWhen the [FILTER] button is pressed two times successively aftercleaning the filter, the display goes off and is reset. Note: ● When two or more different types of indoor unit a...

16 Installation Area Avoid installing the air conditioner in the following places.• Where flammable gas could leak. Caution: Do not install the unit in an area where flammable gas could leak.If gas leaks and collects around the unit, it may cause an explosion. • Where there is a lot of machine oil i...

17 Also consider operation sound • Do not put an object around the air outlet of the outdoor unit. It may cause lowering of capacity or increase operating sound.• If abnormal sound is heard during operation, consult your dealer. Relocation • When the air conditioner is to be removed or reinstalled b...