Page 2 - English; Index
English English-1 Important Information ................................................................................................................................... English-2Safety Precautions, Maintenance & Recommended Use ....................................................................
Page 3 - Important Information; DECLARATION OF CONFORMITY
English-2 Important Information DECLARATION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that m...
Page 4 - Declaration; Declaration of the Manufacturer; Declaration of the Manufacturer
English English-3 Important Information TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROMWALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THEPOWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICI...
Page 5 - Safety Precautions, Maintenance & Recommended Use
English-4 • The power cable connector is the primary means of detaching the system from the power supply. The monitor should be installed close to a power outlet, which is easily accessible. • Handle with care when transporting. Save packaging for transporting. • Please clean the holes of back cabin...
Page 6 - Contents
English English-5 Contents * Remember to save your original box and packing material to transport or ship the monitor. Your new MDT521S monitor box* should contain the following:• LCD monitor • Power Cord (3 m) • Video Signal Cable (4 m)• User’s Manual • Wireless Remote Control and AAA Batteries• Cl...
Page 7 - Parts Name and Functions
English-6 ON OFF UP ( ) button Activates the OSD menu when the OSD menu is turned-off.Acts as button to move the highlighted area up to select the adjustment with OSD menu. DOWN ( ) button Activates the OSD menu when the OSD menu is turned-off.Acts as button to move the highlighted area down to sele...
Page 8 - Connectors and Terminals
English English-7 EXTERNAL SPEAKER TERMINAL To output the audio signal for external speakers from AUDIO 1, 2, 3 jack or HDMI. AUDIO OUT To output the audio signal from the AUDIO IN 1, 2, 3 jack or HDMI. AUDIO IN 1, 2, 3 To input the audio signal from external equipment such as a computer, VCR or DVD...
Page 9 - Wireless Remote Control
English-8 Wireless Remote Control POWER button Switches the power on/off. * If LED Power Indicator on the monitor is not glowing, then no controls will work. INPUT button Selects from input signal, [RGB1] (HDMI), [RGB2] (DVI-D), [RGB3] (D-SUB), [RGB4] (BNC), [RGB5] (CAT5), [DVD/HD] (YPbPr), [VIDEO&l...
Page 10 - CAT5 Tx BOX; < Operating Range for the Remote
English English-9 CAT5 Tx BOX < Operating Range for the Remote Control > Point the top of the remote control toward the LCD monitor's remote sensor during button operation.Use the remote control within a distance of about 7 m/23 ft. from the front of the LCD monitor's remote control sensor and...
Page 11 - page; Setup Procedure
English-10 1. Determine the installation location CAUTION: DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY YOURSELF.Installing your LCD display must be done by a quali fi ed tech- nician. Contact your dealer for more information. CAUTION: MOVING OR INSTALLING THE LCD MONITOR MUST BE DONE BY TWO OR MO...
Page 12 - Operate the attached external equipment; Connecting HDMI cable
English English-11 6. Operate the attached external equipment Display the signal on the external equipment you wish. 7. Adjust the sound Make adjustments lowering or rising the volume as required. 8. Adjust the screen (See pages 24-34) Make adjustments to the display position or settings if re-quire...
Page 13 - CAT5 video connection
English-12 13. When MDT521S is installed in portrait position Conditions MDT521S can be installed in portrait position, under the fol-lowing conditions: Caution: Portrait position is effective only when wall-mounted or ceiling-mounted.The stands(legs) can not be fi tted to the monitor in portrait po...
Page 14 - Various settings involved in the CAT5
English English-13 2. Connect the D-SUB input connector of the CAT5 Tx BOX and the VGA (D-SUB) output connector of the computer using the signal cable (mini D-SUB 15-pin cable) supplied with the monitor. 3. Connect the modular connector of the CAT5 Tx BOX and the CAT5 (RGB5) IN connector of the moni...
Page 15 - How to Mount and Attach Options to the LCD Monitor
English-14 3. Ventilation Requirements for enclosure mounting To allow heat to disperse, leave space between surrounding objects as shown in the diagram below. 4. To avoid monitor from falling When installing the monitor using the tabletop stands (op-tional), take measures to prevent the monitor fro...
Page 16 - Connections; Before making connections:; Wiring Diagram
English English-15 Connections Before making connections: * First turn off the power of all the attached equipment and make connections.* Refer to the user manual included with each separate piece of equipment. Wiring Diagram Monitor VCR (RCA) LCD monitor (second monitor) Stereo amplifier Personal c...
Page 17 - Connecting a Personal Computer; Connect the LCD Monitor to a Personal Computer
English-16 Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer's screen image.Some video cards may not display an image correctly. Connect the LCD Monitor to a Personal Computer • To connect the RGB 3 IN connector (mini D-sub 15 pin) o...
Page 18 - Connecting with Digital Interface Equipment; Connect the LCD Monitor to a Computer with a Digital Output
English English-17 Connecting with Digital Interface Equipment Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard. Connect the LCD Monitor to a Computer with a Digital Output • To connect the RGB 2 IN connector ...
Page 19 - Connecting a DVD Player with component out / HDMI out / DVI out; Connect the LCD Monitor to a DVD Player
English-18 Connecting a DVD Player with component out / HDMI out / DVI out Connecting your DVD player to your LCD monitor will enable you to display DVD video.Refer to your DVD player owner’s manual for more information. Connect the LCD Monitor to a DVD Player • To connect the DVD/HD IN connector (B...
Page 20 - Connecting to a VCR / Stereo Ampli; Connect the LCD Monitor to a VCR / Stereo Ampli
English English-19 Connecting to a VCR / Stereo Ampli fi er You can connect your VCR / stereo ampli fi er to your LCD monitor. Refer to your VCR / stereo ampli fi er owner's manual for more information. Connect the LCD Monitor to a VCR / Stereo Ampli fi er • To connect the VIDEO IN connector (RCA, B...
Page 21 - Power ON and OFF Modes; Basic Operation
English-20 1. Pressing the Main Power Switch. NOTE: When the Main Power Switch is used to power off the LCD monitor, the remote control and the power button will not activate the on mode and both green and red power indicator turn off. Be sure to turn the Main Power Switch to the on mode before usin...
Page 22 - To view a video source:
English English-21 Power Indicator Status Power ON Green Power OFF RedRed OnGreen Blinking Power Standby Red, GreenRed Blinking* Power Standby when “SCHEDULE” is enable Diagnosis(Detecting failure) See troubleshooting on page 38 Using Power Management The LCD monitor follows the VESA approved DPM Po...
Page 23 - Information OSD; PIP or POP
English-22 Information OSD RGB1, 2, 3, 4, 5 Video Input mode Input signal Information Audio input mode Picture Size mode RGB3 1024 x 768 48kHz 60Hz AUDIO : 1 SIZE : FULL ) DVD/HD Video Input mode Audio input mode Picture Size mode DVD/HD AUDIO : 3 SIZE : FULL VIDEO<S>, VIDEO Video Input mode I...
Page 25 - PICTURE
English-24 PICTURE Main-Menu BRIGHTNESS Adjusts the overall image and background screen brightness.Press + button to increase brightness.Press - button to decrease brightness. CONTRAST Adjusts the image brightness in relation to the input signal.Press + button to increase contrast.Press - button to ...
Page 27 - SCREEN
English-26 OFF H FLIP V FLIP Horizontally rotated Vertically rotated SCREEN Main-Menu H POSITION Controls Horizontal Image position within the display area of the LCD.Press + button to move screen to right.Press - button to move screen to left. V POSITION Controls Vertical Image position within the ...
Page 28 - AUDIO
English English-27 AUDIO Main-Menu PIP (PICTURE IN PICTURE) Note: The “PIP” and “POP” modes do not function when the screen size is “CUSTOM” or “REAL”. Main-Menu BALANCE Adjust the balance of L/R volume.Press + button to move the stereo sound image to right.Sound of the left side will be small.Press...
Page 29 - CONFIGURATION 1
English-28 CONFIGURATION 1 Main-Menu AUTO SETUP * : INPUT RGB3, 4, 5 only Press “SET” button to automatically adjust screen size, horizontal position, vertical position, clock, clock phase, white level and black level.Press “EXIT” button to cancel execution AUTO SETUP and then will return to the pre...
Page 30 - CONFIGURATION 2
English English-29 CONFIGURATION 2 Main-Menu CAT5 CABLE LENGTH [CAT5 CABLE LENGTH] Select the cable length, and the defaults of all the adjustment values are automatically determined. Select the length that is closest to the actual length of your cable. [CAT5 EQ] Make adjustment so that blur and sme...
Page 31 - ADVANCED OPTION
English-30 ADVANCED OPTION Main-Menu INPUT RESOLUTION * : INPUT RGB3, 4, 5 only Selects to decision of input signal about below timings, 1024x768, 1280x768 and 1360x768.AUTO: Determines the resolution automatically.1024x768: Determines the resolution as 1024x7681280x768: Determines the resolution as...
Page 33 - NOTE; Image Sticking of LCD Panel
English-32 NOTE < IMAGE PERSISTENCE > Please be aware that LCD Technology may experience a phenomena known as Image Persistence. Image Persistence occurs when residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is no...
Page 34 - < Supplemental information of the auto brightness function >
English English-33 < PIP, POP and SIDE BY SIDE > The following table shows the combination of signal inputs under which the “PIP” and “POP” modes function. These modes do not function, however, when the screen size is “CUSTOM” or “REAL”. < Supplemental information of the auto brightness fun...
Page 36 - Controlling the LCD monitor via RS-232C/RS-485 Remote Control
English English-35 Controlling the LCD monitor via RS-232C/RS-485 Remote Control This LCD monitor can be controlled by the computer connected by an RS-232C cable or a CAT5 cable via the supplied CAT5 Tx BOX.Functions that can be controlled by a personal computer are:• Power ON or OFF• Switching betw...
Page 38 - Features
English English-37 Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The monitor’s small footprint and low weight allow it to be moved or transported easily from one location to another. Color Control Systems: Allow...
Page 39 - Troubleshooting
English-38 Troubleshooting No picture • The signal cable should be completely connected to the display card/computer.• The display card should be completely seated in its slot.• Front Power Switch and computer power switch should be in the ON position.• Check to make sure that a supported mode has b...
Page 40 - No Sound; Stripe Noise; “NO SIGNAL” is displayed on the screen
English English-39 No Sound • Check to see if speaker cable is properly connected.• Check to see if mute is activated.• Check to see if volume is set at minimum. Remote Control is not available • Check the Remote Control’s batteries status.• Check if batteries are inserted correctly.• Check if the R...
Page 41 - Speci
English-40 Speci fi cations Speci fi cations (MDT521S) Product SpecificationsLCD Module Frequency Pixel ClockViewable SizeInput Signal PC-Input: VIDEO Input: AUDIO Input: CAT5: RS-232C:Output Signal PC-Output: VIDEO Output: AUDIO Output: Speaker Output: CAT5: RS-232C:Resolutions Supported Power Supp...
Page 42 - Pin Assignment
English English-41 Pin Assignment 1) Analog RGB input (Mini D-SUB 15P): RGB3 Mini D-SUB 15P 1 Video Signal RedVideo Signal GreenVideo Signal BlueGNDDDC-GNDRed-GNDGreen-GNDBlue-GND+5V (DDC)SYNC-GNDGNDDDC-SDAH-SYNCV-SYNCDDC-SCL 6789 101112131415 2345 Pin No Name 5 10 15 1 6 11 2) Analog RGB input (CAT...
Page 44 - MITSUBISHI Contact Information
North America MESCA (Mitsubishi Electric Sales Canada Inc.) http://www.mitsubishielectric.ca Information Technologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2, Canada Sales Phone :+1-(905) 475-7728 Fax :+1-(905) 475-7958 E-mail :[email protected] Technical Phone :+1-(905) 475-7728 Fax :+1-(...
