Mitsubishi MDT521S- Manuals

English-4 • The power cable connector is the primary means of detaching the system from the power supply. The monitor should be installed close to a power outlet, which is easily accessible. • Handle with care when transporting. Save packaging for transporting. • Please clean the holes of back cabin...

English English-5 Contents * Remember to save your original box and packing material to transport or ship the monitor. Your new MDT521S monitor box* should contain the following:• LCD monitor • Power Cord (3 m) • Video Signal Cable (4 m)• User’s Manual • Wireless Remote Control and AAA Batteries• Cl...

English-6 ON OFF UP ( ) button Activates the OSD menu when the OSD menu is turned-off.Acts as button to move the highlighted area up to select the adjustment with OSD menu. DOWN ( ) button Activates the OSD menu when the OSD menu is turned-off.Acts as button to move the highlighted area down to sele...

English English-7 EXTERNAL SPEAKER TERMINAL To output the audio signal for external speakers from AUDIO 1, 2, 3 jack or HDMI. AUDIO OUT To output the audio signal from the AUDIO IN 1, 2, 3 jack or HDMI. AUDIO IN 1, 2, 3 To input the audio signal from external equipment such as a computer, VCR or DVD...

English-8 Wireless Remote Control POWER button Switches the power on/off. * If LED Power Indicator on the monitor is not glowing, then no controls will work. INPUT button Selects from input signal, [RGB1] (HDMI), [RGB2] (DVI-D), [RGB3] (D-SUB), [RGB4] (BNC), [RGB5] (CAT5), [DVD/HD] (YPbPr), [VIDEO&l...

English English-9 CAT5 Tx BOX < Operating Range for the Remote Control > Point the top of the remote control toward the LCD monitor's remote sensor during button operation.Use the remote control within a distance of about 7 m/23 ft. from the front of the LCD monitor's remote control sensor and...

English-10 1. Determine the installation location CAUTION: DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY YOURSELF.Installing your LCD display must be done by a quali fi ed   tech- nician. Contact your dealer for more information. CAUTION: MOVING OR INSTALLING THE LCD MONITOR MUST BE DONE BY TWO OR MO...

English English-11 6. Operate the attached external equipment Display the signal on the external equipment you wish. 7. Adjust the sound Make adjustments lowering or rising the volume as required. 8. Adjust the screen (See pages 24-34) Make adjustments to the display position or settings if re-quire...

English-12 13. When MDT521S is installed in portrait position Conditions MDT521S can be installed in portrait position, under the fol-lowing conditions: Caution: Portrait position is effective only when wall-mounted or ceiling-mounted.The stands(legs) can not be fi tted to the monitor in portrait po...

English English-13 2. Connect the D-SUB input connector of the CAT5 Tx BOX and the VGA (D-SUB) output connector of the computer using the signal cable (mini D-SUB 15-pin cable) supplied with the monitor. 3. Connect the modular connector of the CAT5 Tx BOX and the CAT5 (RGB5) IN connector of the moni...

English-14 3. Ventilation Requirements for enclosure mounting To allow heat to disperse, leave space between surrounding objects as shown in the diagram below. 4. To avoid monitor from falling When installing the monitor using the tabletop stands (op-tional), take measures to prevent the monitor fro...

English English-15 Connections Before making connections: * First turn off the power of all the attached equipment and make connections.* Refer to the user manual included with each separate piece of equipment. Wiring Diagram Monitor VCR (RCA) LCD monitor (second monitor) Stereo amplifier Personal c...

English-16 Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer's screen image.Some video cards may not display an image correctly. Connect the LCD Monitor to a Personal Computer • To connect the RGB 3 IN connector (mini D-sub 15 pin) o...

English English-17 Connecting with Digital Interface Equipment Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard. Connect the LCD Monitor to a Computer with a Digital Output • To connect the RGB 2 IN connector ...

English-18 Connecting a DVD Player with component out / HDMI out / DVI out Connecting your DVD player to your LCD monitor will enable you to display DVD video.Refer to your DVD player owner’s manual for more information. Connect the LCD Monitor to a DVD Player • To connect the DVD/HD IN connector (B...

English English-19 Connecting to a VCR / Stereo Ampli fi er You can connect your VCR / stereo ampli fi er to your LCD monitor. Refer to your VCR / stereo ampli fi er owner's manual for more information. Connect the LCD Monitor to a VCR / Stereo Ampli fi er • To connect the VIDEO IN connector (RCA, B...

English-20 1. Pressing the Main Power Switch. NOTE: When the Main Power Switch is used to power off the LCD monitor, the remote control and the power button will not activate the on mode and both green and red power indicator turn off. Be sure to turn the Main Power Switch to the on mode before usin...

English English-21 Power Indicator Status Power ON Green Power OFF RedRed OnGreen Blinking Power Standby Red, GreenRed Blinking* Power Standby when “SCHEDULE” is enable Diagnosis(Detecting failure) See troubleshooting on page 38 Using Power Management The LCD monitor follows the VESA approved DPM Po...

English-22 Information OSD RGB1, 2, 3, 4, 5 Video Input mode Input signal Information Audio input mode Picture Size mode RGB3 1024 x 768 48kHz 60Hz AUDIO : 1 SIZE : FULL ) DVD/HD Video Input mode Audio input mode Picture Size mode DVD/HD AUDIO : 3 SIZE : FULL VIDEO<S>, VIDEO Video Input mode I...

English-24 PICTURE Main-Menu BRIGHTNESS Adjusts the overall image and background screen brightness.Press + button to increase brightness.Press - button to decrease brightness. CONTRAST Adjusts the image brightness in relation to the input signal.Press + button to increase contrast.Press - button to ...

English-26 OFF H FLIP V FLIP Horizontally rotated Vertically rotated SCREEN Main-Menu H POSITION Controls Horizontal Image position within the display area of the LCD.Press + button to move screen to right.Press - button to move screen to left. V POSITION Controls Vertical Image position within the ...

English English-27 AUDIO Main-Menu PIP (PICTURE IN PICTURE) Note: The “PIP” and “POP” modes do not function when the screen size is “CUSTOM” or “REAL”. Main-Menu BALANCE Adjust the balance of L/R volume.Press + button to move the stereo sound image to right.Sound of the left side will be small.Press...

English-28 CONFIGURATION 1 Main-Menu AUTO SETUP * : INPUT RGB3, 4, 5 only Press “SET” button to automatically adjust screen size, horizontal position, vertical position, clock, clock phase, white level and black level.Press “EXIT” button to cancel execution AUTO SETUP and then will return to the pre...

English English-29 CONFIGURATION 2 Main-Menu CAT5 CABLE LENGTH [CAT5 CABLE LENGTH] Select the cable length, and the defaults of all the adjustment values are automatically determined. Select the length that is closest to the actual length of your cable. [CAT5 EQ] Make adjustment so that blur and sme...

English-30 ADVANCED OPTION Main-Menu INPUT RESOLUTION * : INPUT RGB3, 4, 5 only Selects to decision of input signal about below timings, 1024x768, 1280x768 and 1360x768.AUTO: Determines the resolution automatically.1024x768: Determines the resolution as 1024x7681280x768: Determines the resolution as...

English-32 NOTE < IMAGE PERSISTENCE > Please be aware that LCD Technology may experience a phenomena known as Image Persistence. Image Persistence occurs when residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is no...

English English-33 < PIP, POP and SIDE BY SIDE > The following table shows the combination of signal inputs under which the “PIP” and “POP” modes function. These modes do not function, however, when the screen size is “CUSTOM” or “REAL”. < Supplemental information of the auto brightness fun...

English English-35 Controlling the LCD monitor via RS-232C/RS-485 Remote Control This LCD monitor can be controlled by the computer connected by an RS-232C cable or a CAT5 cable via the supplied CAT5 Tx BOX.Functions that can be controlled by a personal computer are:• Power ON or OFF• Switching betw...

English English-37 Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The monitor’s small footprint and low weight allow it to be moved or transported easily from one location to another. Color Control Systems: Allow...

English-38 Troubleshooting No picture • The signal cable should be completely connected to the display card/computer.• The display card should be completely seated in its slot.• Front Power Switch and computer power switch should be in the ON position.• Check to make sure that a supported mode has b...

English English-39 No Sound • Check to see if speaker cable is properly connected.• Check to see if mute is activated.• Check to see if volume is set at minimum. Remote Control is not available • Check the Remote Control’s batteries status.• Check if batteries are inserted correctly.• Check if the R...

English-40 Speci fi cations Speci fi cations (MDT521S) Product SpecificationsLCD Module Frequency Pixel ClockViewable SizeInput Signal PC-Input: VIDEO Input: AUDIO Input: CAT5: RS-232C:Output Signal PC-Output: VIDEO Output: AUDIO Output: Speaker Output: CAT5: RS-232C:Resolutions Supported Power Supp...

English English-41 Pin Assignment 1) Analog RGB input (Mini D-SUB 15P): RGB3 Mini D-SUB 15P 1 Video Signal RedVideo Signal GreenVideo Signal BlueGNDDDC-GNDRed-GNDGreen-GNDBlue-GND+5V (DDC)SYNC-GNDGNDDDC-SDAH-SYNCV-SYNCDDC-SCL 6789 101112131415 2345 Pin No Name 5 10 15 1 6 11 2) Analog RGB input (CAT...

North America MESCA (Mitsubishi Electric Sales Canada Inc.) http://www.mitsubishielectric.ca Information Technologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2, Canada Sales Phone :+1-(905) 475-7728 Fax :+1-(905) 475-7958 E-mail :[email protected] Technical Phone :+1-(905) 475-7728 Fax :+1-(...