Page 2 - CAUTION; TO REDUCE THE RISK OF ELECTRIC SHOCK,; This apparatus must be grounded.; WARNING
EN – 2 RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intendedto ale...
Page 3 - ENGLISH; Contents; Trademark, Registered trademark
EN – 3 ENGLISH Contents Important safeguards ........................................................................... 4 Overview ............................................................................................... 6 Using the remote control ................................................
Page 4 - Important safeguards
EN – 4 Important safeguards Please read all these instructions regarding your LCDprojector and retain them for future reference. Followall warnings and instructions marked on the LCD pro-jector. 1. Read instructionsAll the safety and operating instructions shouldbe read before the appliance is opera...
Page 5 - COMPLIANCE NOTICE OF INDUSTRY CANADA
EN – 5 ENGLISH WARNING: Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comesout of your projector. It might cause fire or electricshock. In this case, unplug immediately and contactyour dealer. Never remove the cabinet. This project...
Page 6 - Overview; Control panel
EN – 6 Overview TEMP LAMP VOLUME SOURCE COMPUTER VIDEO AUTO POSITION MENU ENTER MUTE 6 5 4 3 2 1 8 9 10 12 7 11 5 9 11 8 6 10 7 12 13 14 2 3 4 1 USB L S-VIDEO VIDEO AUDIO IN VIDEO IN MAIN AC IN R COMPUTER IN RS-232C COMPUTER OUT 5 10 11 8 9 7 6 4 3 2 1 Control panel Terminal board 1 Front height adj...
Page 7 - Bottom side; Remote control; While holding the LASER button down, press the; About the laser beam; result in hazardous radiation exposure.; C A U T I O N
EN – 7 ENGLISH Bottom side 2 1 1 Lamp cover 2 Adjustment foot Caution: Do not replace the lamp right after using the projector. Thelamp is very hot. COMPUTER VIDEO KEYSTONE EXPAND VOLUME LASER P in P AUTO POSITION – + 1 2 3 456 7 8 9 1011 2019 18 21 17 16 15 14 13 12 1 2 MENU ENTER MUTE STILL 16 : 9...
Page 8 - Using the remote control
EN – 8 Battery installation Use two AA size batteries.1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). • Load the batteries from - spring si...
Page 9 - Installation; Orientation of the projector; Front projection; Screen
EN – 9 ENGLISH Installation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector. Front projection To find the approximate distance be-tween the projector and screen:Multiply the width of the screen x 1.8 (min.) , Multiply the width of th...
Page 10 - Basic connections; Projector + AV equipment; Projector + DVD player or HDTV decoder; Some DVD players have output terminal for 3 line fitting (Y, C
EN – 10 Basic connections This projector can be connected to equipment such as PC, VCRs, video cameras and DVD players. Important: • Make sure that your equipment is turned off before connection.• Plug in firmly and unplug by holding the plug, not by pulling the AC power cord.• If connected units ar...
Page 11 - Projector + Personal computer; Please contact your dealer.; For using Macintosh; switch first, and then boot up the computer.
EN – 11 ENGLISH USB L S-VIDEO VIDEO AUDIO IN VIDEO IN MAIN AC IN R COMPUTER IN RS-232C COMPUTER OUT AUDIO OUT MONITOR OUTPUT to COMPUTER IN to AUDIO IN to monitor port to COMPUTER OUT to PC audiooutput PC audio cable (option) When outputting to both a PC monitor and the projector. RGB cable for PC R...
Page 12 - Preparing the projector for operation; Getting ready for projection
EN – 12 Adjustment foot screen Preparing the projector for operation Getting ready for projection 1. Connect the power cord provided to the projector.2. Connect the power cord to the wall power outlet.3. Remove the lens cap. Warning: • Do not look directly into the lens when projector is “ON”. • The...
Page 13 - To operate projector power ON; MUTE button; zoom ring
EN – 13 ENGLISH To operate projector power ON • When the lamp indicator is blinking red, the lamp should be replaced. Replace the lamp. See pages 22and 25. • The picture might not be of optimum performance in extreme hot or cold conditions. (The projector isnot malfunctioning.) 4. Select the desired...
Page 14 - Turning off the projector; AUTO POSITION button
EN – 14 30 To operate projector power ON (Continue) Turning off the projector 7. Press the POWER button. The message “POWER OFF? YES : PRESS AGAIN” appears on the screen. • To exit from this mode, press any button except the POWER button. (Some buttons on the remotecontrol do not work for exit from ...
Page 15 - Basic operation; Menu operation
EN – 15 ENGLISH Basic operation Several settings can be adjusted using Menu. EXAMPLE: Auto power off time setting 1. Press the MENU button. 2. Press the $ or % button to select the INSTALLA- TION menu. 3. Press the ENTER button (or } button). 4. Press the { or } button to select AUTO POWER OFF. 5. P...
Page 17 - FEATURE
EN – 17 ENGLISH MEMORY CALL SIGNAL AUTO HORIZ. POSITION 0 VERT. POSITION 0 TRACKING 0 COMPUTER INPUT RGB FINE SYNC. 0 HOLD AUTO USER MEMORIZE DELETE DEFAULT R G B R G B A U XGA60 opt. FEATURE XGA60 opt. MENU POSITION EXPAND MODE FRAME POSI. A A A A 1. 1. 3. OFF ON OFF AUTO 3D CineView English SCART ...
Page 18 - Adjusting the image; Picture adjustment; Color matrix; User memory for signal setting
EN – 18 Adjusting the image You can adjust the picture by using the IMAGE menu. To control the level of white-to-black in the image : Adjust CONTRAST in IMAGE menu. Press the % button to increase the contrast and the $ button to reduce it. To control the light level of the image : Adjust BRIGHTNESS ...
Page 19 - Adjustment from personal computer; Color temperature
EN – 19 ENGLISH Adjustment from personal computer Although this projector sets proper signal systemsautomatically for the image signal from personalcomputers, it cannot be applied to some of personalcomputers. In this case, press the AUTO POSITIONbutton. If the images are still not projected correct...
Page 20 - Advanced features for presentation; Expand; Setting the Expand mode; Still; EXPAND MODE; Using the Expand mode
EN – 20 Advanced features for presentation Expand By pressing the EXPAND button on the remote con-trol, you can magnify the detailed image of the picture.You can also view the screen displaying the picture asits original size (native resolution display). Setting the Expand mode 1. Press the MENU but...
Page 21 - Mouse remote control; Projector + PC with USB connector; Operation; nal which the projector recognizes first will work.
EN – 21 ENGLISH Mouse remote control By connecting to personal computer through the USB or PS/2 port, you can operate your computer with theprojector remote control. Connection Projector + PC with USB connector Operation • Turn off PC and the projector before connecting with PS/2 port. When connecti...
Page 22 - Lamp replacement
EN – 22 The lamp is designed to project the image on the LCDpanels. When the lamp no longer functions, replace itwith a new one. Caution: • Do not remove the lamp immediately after turning off the lamp of the projector, you may get burnedbecause of the high temperature of the lamp. • For lamp replac...
Page 23 - Maintenance; Cleaning the air-filter; • Use water or a mild detergent diluted with; Cleaning the lens
EN – 23 ENGLISH Maintenance Caution: Be sure to turn off the projector and unplug the powercord from the wall outlet before you perform any main-tenance on the projector. Cleaning the air-filter Clean the air-filter frequently. If the filter or ventilationgrille become clogged with dirt or dust, the...
Page 24 - Troubleshooting; CAUSE; POWER indicator does not light up.; • Screen size exceeds screen size specifications.; POSSIBLE SOLUTIONS
EN – 24 Troubleshooting The following offers solutions to some of the common problems you may encounter. We suggest that you consultthis chart before contacting your dealer. CAUSE • The air inlet grille, outlet grille or air filter is clogged with dust or some objects. POWER indicator does not light...
Page 25 - Indicators; Normal condition; POWER LAMP; Unusual temperature
EN – 25 ENGLISH Indicators The projector has three LED Indicators which shows the working condition of the projector.The following offers solutions to possible problems. If a problem persists, turn the projector off and consult yourdealer. Normal condition Abnormal condition Steady red Steady green ...
Page 26 - Specifications; Kensington Lock
EN – 26 Specifications LCD projector XL2U AC100V - 240V, 50 / 60Hz 2.3 A 0.7-inch LCD panel: 3 pieces (for R, G, B) Pixels 1,024 × 768 = 786,432 pixels Total 2,359,296 pixels Active pixel rate: 99.99 % or more (each panel) 16,770,000 colors F 1.9 - 2.2 f = 27 mm - 32 mm 150 W HS 30 inch - 300 inch (...
Page 27 - Connectors; PC analog RGB input; What’s included in the box
EN – 27 ENGLISH Connectors PC analog RGB input Use to input video signals (analogRGB) of a personal computer. (Pin assignment of Mini D-SUB 15P jack) PIN NO. SPEC PIN NO. SPEC 1 R(RED)/P R /C R 9 — 2 G(GREEN)/Y 10 GROUND 3 B(BLUE)/P B /C B 11 GROUND 4 GROUND 12 DDC Data 5 GROUND 13 HD/CS 6 GROUND 14...
