Page 2 - CAUTION; TO REDUCE THE RISK OF ELECTRIC SHOCK,; This apparatus must be grounded.; WARNING
EN – 2 RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intendedto ale...
Page 3 - ENGLISH; Contents; Trademark, Registered trademark
EN – 3 ENGLISH Contents Important safeguards ........................................................................... 4 Overview ............................................................................................... 6 Using the remote control ................................................
Page 4 - Important safeguards; as this can result in a fire or electric shock.
EN – 4 Important safeguards Please read all these instructions regarding your LCDprojector and retain them for future reference. Followall warnings and instructions marked on the LCD pro-jector. 1. Read instructionsAll the safety and operating instructions shouldbe read before the appliance is opera...
Page 5 - COMPLIANCE NOTICE OF INDUSTRY CANADA
EN – 5 ENGLISH WARNING: Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comesout of your projector. It might cause fire or electricshock. In this case, unplug immediately and contactyour dealer. Never remove the cabinet. This project...
Page 6 - Overview; Control panel
EN – 6 Overview TEMP LAMP VOLUME SOURCE COMPUTER VIDEO AUTO POSITION MENU ENTER MUTE 6 5 4 3 2 1 8 9 10 12 7 11 5 9 11 8 6 10 7 12 13 14 2 3 4 1 L S-VIDEO VIDEO AUDIO IN VIDEO IN MAIN AC IN R COMPUTER IN RS-232C COMPUTER OUT 5 10 8 9 7 6 4 3 2 1 Control panel Terminal board 1 Front height adjuster b...
Page 7 - Bottom side; Remote control
EN – 7 ENGLISH Bottom side 2 1 1 Lamp cover 2 Adjustment foot Caution: Do not replace the lamp right after using the projector. Thelamp is very hot. 1 2 4 5 6 7 8 9 10 11 12 3 1413 MENU ENTER VIDEO COMPUTER 16:9 STILL P in P EXPAND VOLUME KEYSTONE - + MUTE AUTO POSITION Remote control 1 POWER button...
Page 8 - Using the remote control
EN – 8 Battery installation Use two AA size batteries.1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). • Load the batteries from - spring si...
Page 9 - Installation; Orientation of the projector; Front projection; Screen
EN – 9 ENGLISH Installation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector. Front projection To find the approximate distance be-tween the projector and screen:Multiply the width of the screen x 1.8 (min.) , Multiply the width of th...
Page 10 - Basic connections; Projector + AV equipment; Projector + DVD player or HDTV decoder; Some DVD players have output terminal for 3 line fitting (Y, C
EN – 10 Basic connections This projector can be connected to equipment such as PC, VCRs, video cameras and DVD players. Important: • Make sure that your equipment is turned off before connection.• Plug in firmly and unplug by holding the plug, not by pulling the AC power cord.• If connected units ar...
Page 11 - Projector + Personal computer; Please contact your dealer.; For using Macintosh; switch first, and then boot up the computer.
EN – 11 ENGLISH L S-VIDEO VIDEO AUDIO IN VIDEO IN MAIN AC IN R COMPUTER IN RS-232C COMPUTER OUT AUDIO OUT MONITOR OUTPUT to COMPUTER IN to AUDIO IN to monitor port to COMPUTER OUT to PC audiooutput PC audio cable (option) When outputting to both a PC monitor and the projector. RGB cable for PC RGB c...
Page 12 - Preparing the projector for operation; Getting ready for projection
EN – 12 Adjustment foot screen Preparing the projector for operation Getting ready for projection 1. Connect the power cord provided to the projector.2. Connect the power cord to the wall power outlet.3. Remove the lens cap. Warning: • Do not look directly into the lens when projector is “ON”. • The...
Page 13 - To operate projector power ON; MUTE button; zoom ring
EN – 13 ENGLISH To operate projector power ON 4. Select the desired external input source by using the COMPUTER or VIDEO button. • Pressing the VIDEO button repeatedly will select VIDEO(1) and S-VIDEO(2). • The COMPUTER or VIDEO button does not work when MENU is displayed. At this time, the prohibi-...
Page 14 - Turning off the projector; AUTO POSITION button
EN – 14 30 To operate projector power ON (Continue) Turning off the projector 7. Press the POWER button. The message “POWER OFF? YES : PRESS AGAIN” appears on the screen. • To exit from this mode, press any button except the POWER button. (Some buttons on the remotecontrol do not work for exit from ...
Page 15 - Basic operation; Menu operation
EN – 15 ENGLISH Basic operation Several settings can be adjusted using Menu. EXAMPLE: Auto power off time setting 1. Press the MENU button. 2. Press the $ or % button to select the INSTALLA- TION menu. 3. Press the ENTER button (or } button). 4. Press the { or } button to select AUTO POWER OFF. 5. P...
Page 17 - FEATURE
EN – 17 ENGLISH CLAMP POSITION SIGNAL-USER 0 CLAMP WIDTH 0 HORIZ. PIXELS 0 SHUTTER(RS) 0 VERT. LINES 0 VERT. SYNC. AUTO SHUTTER(LS) 0 SHUTTER(L) 0 SHUTTER(U) 0 MEMORY CALL SIGNAL AUTO HORIZ. POSITION 0 VERT. POSITION 0 TRACKING 0 COMPUTER INPUT RGB FINE SYNC. 0 HOLD AUTO USER MEMORIZE DELETE DEFAULT...
Page 18 - Adjusting the image; Picture adjustment; Color matrix; User memory for signal setting
EN – 18 Adjusting the image You can adjust the picture by using the IMAGE menu. To control the level of white-to-black in the image : Adjust CONTRAST in IMAGE menu. Press the % button to increase the contrast and the $ button to reduce it. To control the light level of the image : Adjust BRIGHTNESS ...
Page 19 - Adjustment from personal computer; Color temperature
EN – 19 ENGLISH Adjustment from personal computer Although this projector sets proper signal systemsautomatically for the image signal from personalcomputers, it cannot be applied to some of personalcomputers. In this case, press the AUTO POSITIONbutton. If the images are still not projected correct...
Page 20 - Advanced features for presentation; Expand; Setting the Expand mode; Still; Using the Expand mode
EN – 20 Advanced features for presentation Expand By pressing the EXPAND button on the remote con-trol, you can magnify the detailed image of the picture.You can also view the screen displaying the picture asits original size (native resolution display). Setting the Expand mode 1. Press the MENU but...
Page 21 - Lamp replacement
EN – 21 ENGLISH The lamp is designed to project the image on the LCD pan-els. When the lamp no longer functions, replace it with anew one. Caution: • Do not remove the lamp immediately after turning off the lamp of the projector, you may get burned because ofthe high temperature of the lamp. • For l...
Page 22 - Maintenance; Cleaning the air-filter; • Use water or a mild detergent diluted with; Cleaning the lens
EN – 22 Maintenance Caution: Be sure to turn off the projector and unplug the powercord from the wall outlet before you perform any main-tenance on the projector. Cleaning the air-filter Clean the air-filter frequently. If the filter or ventilationgrille become clogged with dirt or dust, the tempera...
Page 23 - Troubleshooting; CAUSE; POWER indicator does not light up.; • Screen size exceeds screen size specifications.; POSSIBLE SOLUTIONS; The image is
EN – 23 ENGLISH Troubleshooting The following offers solutions to some of the common problems you may encounter. We suggest that you consultthis chart before contacting your dealer. CAUSE • The air inlet grille, outlet grille or air filter is clogged with dust or some objects. POWER indicator does n...
Page 24 - Indicators; Normal condition; POWER LAMP
EN – 24 Indicators The projector has three LED Indicators which shows the working condition of the projector.The following offers solutions to possible problems. If a problem persists, turn the projector off and consult yourdealer. Normal condition Abnormal condition Steady red Steady green Steady g...
Page 25 - Specifications; Kensington Lock
EN – 25 ENGLISH Specifications LCD projector XL1XU | SL2U AC100V - 240V, 50 / 60Hz 2.3 A XL1XU SL2U 0.7-inch LCD panel: 3 pieces (for R, G, B) 0.7-inch LCD panel: 3 pieces (for R, G, B) Pixels 1,024 × 768 = 786,432 pixels Pixels 800 × 600 = 480,000 pixels Total 2,359,296 pixels Total 1,440,000 pixel...
Page 26 - Connectors; PC analog RGB input; What’s included in the box
EN – 26 Specifications (continued) Connectors PC analog RGB input Use to input video signals (analogRGB) of a personal computer. (Pin assignment of Mini D-SUB 15P jack) PIN NO. SPEC PIN NO. SPEC 1 R(RED)/P R /C R 9 — 2 G(GREEN)/Y 10 GROUND 3 B(BLUE)/P B /C B 11 GROUND 4 GROUND 12 DDC Data 5 GROUND 1...
Page 29 - Control projector by using a personal computer; Connection; ) Control command diagram; A code of each fixed control move.; LCD Projector
1 Control projector by using a personal computer 1) Interface This projector can be controlled by connecting a personal computer with RS-232C terminal. Functions can be controlled by a personal computer:• Turn the ON or OFF• Changing input signals• Menu setting Connection to Com1Comport to RS-232Cte...
Page 30 - 32C, reject other codes from personal computer side.; ) Operation commands; How to set the grade
2 3) Control sequence (1) Send the command from a personal computer to the projector. (The commands must be sent at least 400ms apart.) (2) The projector will send a return command 400ms* after it has received an end code. If the command is not received correctly, the projector will not send the ret...
Page 32 - Set the AUTO POWER ON to ON.
4 ITEM ASCII HEX VALUE SPLASH SCREEN SS 53h 53h 0 (OFF), 1 (ON) BACK COLOR BB 42h 42h 0 (BLACK), 1 (BLUE) LAMP MODE LM 4Ch 4Dh 0 (STANDARD), 1 (LOW) IMAGE REVERSE IR 49h 52h 0 (OFF), 1 (Mirror), 2 (Invert), 3 (Mirror invert) MENU POSITION MP 4Dh 50h 0 (Upper left), 1 (Lower right) EXPAND MODE EX 45h...
