Page 2 - RISK OF ELECTRIC SHOCK; TO REDUCE THE RISK OF ELECTRIC SHOCK, DO; WARNING; This apparatus must be grounded.; CAUTION
EN - 2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning fl ash with arrowhead symbol within an equilateral triangle is intended to aler...
Page 3 - ENGLISH; Contents; Trademark, Registered trademark; MITSUBISHI ELECTRIC; Mitsubishi Digital Electronics America, Inc.; this device may not cause harmful interference, and
EN - 3 ENGLISH Contents Trademark, Registered trademark Macintosh is registered trademark of Apple Computer Inc.DLP™, Digital Micromirror Device and DMD are all trademarks of Texas Instruments.Other brand or product names are trademarks or registered trademarks of their respective holders. Declarati...
Page 4 - Important safeguards; All operating instructions must be followed.
EN - 4 Important safeguards Please read all these instructions regarding your projec-tor and retain them for future reference. Follow all warn-ings and instructions marked on the projector. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated...
Page 5 - COMPLIANCE NOTICE OF FCC
EN - 5 ENGLISH WARNING: Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It may cause fi re or electric shock. In this case, unplug immediately and contact your dealer. Never remove the cabinet. This projec...
Page 6 - Overview; Control panel; • While the menu or the screen for the keystone adjust-; Terminal board; POWER
EN - 6 Overview 1 2 3 4 5 6 9 8 7 7 10 1112 13 14 1 FOCUS ring 2 ZOOM ring 3 Control panel 4 Air outlet grille5 Remote control sensor (Front)6 Air inlet grille7 Air outlet grille8 Terminal board 9 Kensington Security Lock Standard connector10 Air inlet grille Control panel 1 Power button 2 AUTO POSI...
Page 7 - Bottom side; cover; Remote control; How to disable the LASER button; About the laser beam
EN - 7 ENGLISH Bottom side 3 2 1 COMPUTER VIDEO KEYSTONE EXPAND VOLUME LASER P in P AUTO POSITION MENU R-CLICK ENTER MUTE STILL 16 : 9 SELECT DVD VIDEO 1 2 1 2 MEMORY 1 2 3 4567 8 9 1011 12 232221 24 2019 18 171615 14 13 1 Adjustment foot (Front)2 Lamp cover 3 Adjustment feet (Rear) Caution: Do not ...
Page 8 - Battery installation
EN - 8 Remote control Battery installation Use two AA size batteries.1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the ar- row. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). • Load the batteries...
Page 9 - Installation; Layout of the projector; Front projection; Rear projection; • Do not apply force to the lens, because the lens; • The
EN - 9 ENGLISH 40 102 32 81 24 61 51 1.3 62 1.6 2.8 7.2 60 152 48 122 36 91 77 2.0 94 2.4 4.3 10.9 80 203 64 163 48 122 103 2.6 125 3.2 5.7 14.5 100 254 80 203 60 152 130 3.3 157 4.0 7.1 18.1 150 381 120 305 90 229 196 5.0 237 6.0 10.7 27.1 200 508 160 406 120 305 262 6.6 316 8.0 14.2 36.2 250 635 2...
Page 10 - Basic connections; fected by their interference.; Projector + AV device; • Speaker output is mono.
EN - 10 S-VIDEO IN VIDEO IN AUDIO IN (1/2) VCR, etc. to video output to audio output to S-video output Basic connections This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors. Important: • Make...
Page 12 - For computer with Mini D-SUB; For Macintosh
EN - 12 Projector + Computer For computer with Mini D-SUB • The signal inputted to the COMPUTER/COMPONENT VIDEO DVI-D (HDCP) IN-2 terminal is not outputted from the COMPUTER OUT terminal. • Make sure to connect computer with DVI cable before starting computer. If connecting computer with DVI cable a...
Page 13 - Preparation; After using the projector:; Preparation for projection
EN - 13 ENGLISH Preparation 1. Tilt up the project to the appropriate angle. 2. Press the foot adjustment buttons next to the adjust- ment feet (rear), and the adjustment feet will come out. 3. Release the buttons to lock the adjustment feet (rear) to that position. 4. Rotate the adjustment feet (re...
Page 14 - Basic operation; • When COMPUTER 1 or COMPUTER 2 is chosen
EN - 14 Basic operation • Images may not be projected with good quality in an extremely hot or cold environment. (This is not a product malfunction.) 4. Adjust the focus by turning the focus ring. 5. Choose your desired external input source using the COMPUTER or VIDEO button.• The input source is s...
Page 15 - Volume from the speaker; Press the VOLUME + or; AV mute
EN - 15 ENGLISH VOLUME 10 Volume from the speaker Press the VOLUME + or - button to change the volume from the speaker.The volume control bar will appear on the screen. • The volume control bar will disappear about 10 sec- onds after the VOLUME button is released. • The VOLUME buttons don ' t functi...
Page 16 - Menu operation
EN - 16 Menu operation IMAGE XGA60 opt. INSTALLATION opt. XGA60 INSTALLATION opt. AUTO POWER ON AUTO POWER OFF OFF OFF XGA60 AUTO POWER ON AUTO POWER OFF OFF OFF AUTO POWER ON AUTO POWER OFF 30 min OFF Basic operation Several settings can be adjusted using the menu. Example : Auto power off time set...
Page 17 - IMAGE; higher as the value increases.; INSTALLATION; off. Use the remote control to turn on the lamp.
EN - 17 ENGLISH INSTALLATION opt. ON BACK COLOR AUTO POWER ON AUTO POWER OFF SPLASH SCREEN MUTE MODE LAMP MODE ON BLUE BLACK OFF IMAGECAPTURE SETUP OFF STANDARD OFF IMAGE REVERSE XGA60 CONTRAST IMAGE 0 BRIGHTNESS 0 STANDARD 0 COLOR AUTO 0 XGA60 CineRichColor AUTO COMPUTER OFF TINT 0 SHARPNESS COLOR ...
Page 19 - Image adjustment; Color temperature; About color temperature; To control the light level of the image :; To determine the intensity of the color :; Adjust COLOR in the IMAGE menu. Press the; To adjust the detail and clarity of the image :; Color matrix
EN - 19 ENGLISH Image adjustment CONTRAST R COLOR TEMP.-USER 0 CONTRAST B 0 BRIGHTNESS R 0 BRIGHTNESS B 0 CONTRAST IMAGE 0 BRIGHTNESS 0 STANDARD 0 COLOR AUTO 0 XGA60 CineRichColor AUTO COMPUTER OFF TINT 0 SHARPNESS COLOR TEMP. GAMMA MODE COLOR MATRIX sRGB opt. 4. Press the or button to select the de...
Page 20 - Adjustment of the image from the computer; To move the image horizontally :; Simple adjustment method
EN - 20 Adjustment of the image from the computer This projector adjusts the format of the video signal supplied from the computer. However, sometimes im-ages are not projected correctly owing to the type of the computer used. When the image from the computer isn ' t projected correctly, press the A...
Page 21 - Advanced features; Expand; EXPAND
EN - 21 ENGLISH Advanced features Expand By pressing the EXPAND button on the remote control, you can magnify the image to view the details. You can view the image in its original size in the REAL mode.• The EXPAND mode doesn't work with video or S-video signal. • The EXPAND mode doesn't function wi...
Page 22 - Setting procedure; Set the background color
EN - 22 Advanced features (Continued) XD450U XD450U CAPTURE : ENTER X2 CANCEL : MENU CAPTURE : ENTER + ENTER CANCEL : MENU XD450U XD450U CAPTURE : ENTER X2 CANCEL : MENU Setting of the image displayed during startup or muting You can display your desired image as the startup screen (or splash screen...
Page 23 - Installation other device's remote commands; How to install; How to use the installed functions
EN - 23 ENGLISH Installation other device's remote commands You can install other device's remote commands in the remote control of this projector. How to install 1. Set the SELECT switch of the remote control of this projector to DVD or VIDEO, depending on the device you use. 2. Place the remote co...
Page 24 - Mouse remote control; Projector + computer with USB connector; Operation; USB; USB cable
EN - 24 Advanced features (Continued) Mouse remote control By connecting to personal computer through the USB port, you can operate your computer with the projector remote control. Projector + computer with USB connector Operation • You can use the mouse remote control function with a computer suppo...
Page 25 - Password function; To enable the password function:
EN - 25 ENGLISH FEATURE PASSWORD FUNCTION XGA60 opt. LOCK UNLOCK OK OK PASSWORD CONFIRM O K CANCEL FEATURE PASSWORD FUNCTION XGA60 opt. LOCK UNLOCK OK OK PASSWORD O K CANCEL Password function This projector is equipped with the password function that is designed for prevention of theft and wrong op-...
Page 26 - Lamp replacement; Reset of the lamp operation time; Interval of lamp replacement; When the lamp operation time exceeds 5000 hours*
EN - 26 Lamp replacement 9. Tighten up the screw (a) using a Phillips screwdriver (+) to secure the lamp cover. Reset of the lamp operation time Plug in the power cord, turn on the lamp, and reset the lamp operation time by keep pressing the , , and POWER buttons on the control panel at the same tim...
Page 27 - Troubleshooting; Problem
EN - 27 ENGLISH Troubleshooting The following offers solutions to some of the common problems you may encounter. We suggest that you consult this chart before contacting your dealer. Images aren't projected on the screen. Problem Power isn't turned on. Images aren't projected on the screen. Images s...
Page 28 - Cause and solution
EN - 28 Troubleshooting (continued) Images aren't projected correctly. Problem Projected images are shaking.Projected images are dis-placed. Projected images are dis-torted. Projected images are dark. Projected images are blurred. White dots are seen on projected images.Black dots are seen on projec...
Page 29 - Others; Maintenance; Cleaning of the projector and the ventilation slots
EN - 29 ENGLISH Others Cause and solution • This air comes out as a result of cooling the inside of the projector. This isn't a product malfunc- tion. • Check that the volume isn't set to low. • The microcomputers inside the projector may be wrongly operating because of noise. Press the POWER button...
Page 30 - Indicators; Normal condition
EN - 30 Indicators POWER STATUS POWER Steady red Steady green Steady green STATUS Off Blinking green Steady green CONDITION Stand-by Lamp stand-by (about 1 minute) The power is on. (Normal condition) NOTE The POWER button cannot be used toswitch between on and off. POWER Steady green or Steady red S...
Page 31 - Specifi cations; Kensington Lock
EN - 31 ENGLISH Specifi cations Type Model Rated power supply Rated input Display Technology Colors Projection lens Light source lamp Picture size PC compatibility Video compatibility Speaker S-video input Video input Audio input Analog RGB input Digital RGB input (DVI-D24-pin) Control connector Out...
Page 34 - MITSUBISHI Projector Contact Information; Manufactured by Mitsubishi Electric Corporation; MITSUBISHI ELECTRIC CORPORATION
North America MESCA (Mitsubishi Electric Sales Canada Inc.)http://www.mitsubishielectric.caInformation Technologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2, CanadaSales Phone :+1-(905) 475-7728 Fax :+1-(905) 475-7958 E-mail :[email protected] Technical Phone :+1-(905) 475-77...
