Page 2 - CAUTION; TO REDUCE THE RISK OF ELECTRIC SHOCK,; WARNING; Please follow WARNING instructions.
EN - 2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert...
Page 3 - ENGLISH; Contents; Trademark, Registered trademark; Macintosh is registered trademark of Apple Computer Inc.; Declaration of Conformity; MITSUBISHI ELECTRIC; Mitsubishi Digital Electronics America, Inc.
EN - 3 ENGLISH Contents Trademark, Registered trademark Macintosh is registered trademark of Apple Computer Inc. DLP™, Digital Micromirror Device and DMD are all trademarks of Texas Instruments. Other brand or product names are trademarks or registered trademarks of their respective holders. Declara...
Page 4 - Important safeguards
EN - 4 Important safeguards Please read all these instructions regarding your projec- tor and retain them for future reference. Follow all warn- ings and instructions marked on the projector.1. Read instructions All the safety and operating instructions should be read before the appliance is operate...
Page 5 - COMPLIANCE NOTICE OF FCC
EN - 5 ENGLISH WARNING: Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It may cause fire or electric shock. In this case, unplug immediately and contact your dealer. Never remove the cabinet. This project...
Page 6 - Overview; Control panel; • While the menu or the screen for the keystone adjust-; While the menu is on the screen, the KEYSTONE but-; Terminal board; POWER
EN - 6 Overview 1 2 3 4 5 6 9 8 7 7 10 1112 13 14 1 FOCUS ring 2 ZOOM ring 3 Control panel 4 Air outlet grille 5 Remote control sensor (Front) 6 Air inlet grille 7 Air outlet grille 8 Terminal board 9 Kensington Security Lock Standard connector 10 Air inlet grille Control panel 1 Power button 2 AUTO...
Page 7 - Bottom side; Lamp cover; Remote control; How to disable the LASER button; About the laser beam; hazardous radiation exposure.
EN - 7 ENGLISH Bottom side 3 2 1 COMPUTER VIDEO KEYSTONE EXPAND VOLUME LASER P in P AUTO POSITION MENU R-CLICK ENTER MUTE STILL 16 : 9 SELECT DVD VIDEO 1 2 1 2 MEMORY 1 2 3 4 5 6 7 8 9 10 11 12 232221 24 2019 18 1716 15 14 13 1 Adjustment foot (Front) 2 Lamp cover 3 Adjustment feet (Rear)Caution: Do...
Page 8 - Battery installation
EN - 8 Remote control Battery installation Use two AA size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the ar- row. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). • Load the batterie...
Page 9 - Installation; Layout of the projector; Front projection; Rear projection; • Do not apply force to the lens, because the lens
EN - 9 ENGLISH 40 102 32 81 24 61 51 1.3 62 1.6 2.8 7.2 60 152 48 122 36 91 77 2.0 94 2.4 4.3 10.9 80 203 64 163 48 122 103 2.6 125 3.2 5.7 14.5 100 254 80 203 60 152 130 3.3 157 4.0 7.1 18.1 150 381 120 305 90 229 196 5.0 237 6.0 10.7 27.1 200 508 160 406 120 305 262 6.6 316 8.0 14.2 36.2 250 635 2...
Page 10 - Basic connections; Projector + AV device
EN - 10 S-VIDEO IN VIDEO IN AUDIO IN (1/2) VCR, etc. to video output to audio output to S-video output Basic connections This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors. Important: • Make...
Page 12 - For computer with Mini D-SUB; For Macintosh; For computer with DVI terminal (For XD450U only)
EN - 12 Projector + Computer For computer with Mini D-SUB • The signal inputted to the COMPUTER/COMPONENT VIDEO DVI-D (HDCP) IN-2 terminal is not outputted from the COMPUTER OUT terminal. • Make sure to connect computer with DVI cable before starting computer. If connecting computer with DVI cable a...
Page 13 - Preparation; After using the projector:; Preparation for projection
EN - 13 ENGLISH Preparation 1. Tilt up the project to the appropriate angle. 2. Press the foot adjustment buttons next to the adjust- ment feet (rear), and the adjustment feet will come out. 3. Release the buttons to lock the adjustment feet (rear) to that position. 4. Rotate the adjustment feet (re...
Page 14 - Basic operation; • When COMPUTER 1 or COMPUTER 2 is chosen
EN - 14 Basic operation • Images may not be projected with good quality in an extremely hot or cold environment. (This is not a product malfunction.) 4. Adjust the focus by turning the focus ring.5. Choose your desired external input source using the COMPUTER or VIDEO button. • The input source is s...
Page 15 - Volume from the speaker; Press the VOLUME + or; AV mute
EN - 15 ENGLISH VOLUME 10 Volume from the speaker Press the VOLUME + or - button to change the volume from the speaker. The volume control bar will appear on the screen. • The volume control bar will disappear about 10 sec- onds after the VOLUME button is released. • The VOLUME buttons don ' t funct...
Page 16 - Menu operation
EN - 16 Menu operation CONTRAST IMAGE 0 BRIGHTNESS 0 STANDARD 0 COLOR AUTO 0 XGA60 CineRichColor 5 COMPUTER OFF TINT 0 SHARPNESS COLOR TEMP. GAMMA MODE COLOR MATRIX sRGB opt. INSTALLATION opt. ON BACK COLOR AUTO POWER ONAUTO POWER OFF SPLASH SCREEN MUTE MODE LAMP MODE ON BLUE BLACK OFF IMAGE CAPTURE...
Page 17 - IMAGE
EN - 17 ENGLISH INSTALLATION opt. ON BACK COLOR AUTO POWER ONAUTO POWER OFF SPLASH SCREEN MUTE MODE LAMP MODE ON BLUE BLACK OFF IMAGE CAPTURE SETUP OFF STANDARD OFF IMAGE REVERSE XGA60 CONTRAST IMAGE 0 BRIGHTNESS 0 STANDARD 0 COLOR AUTO 0 XGA60 CineRichColor AUTO COMPUTER OFF TINT 0 SHARPNESS COLOR ...
Page 19 - Image adjustment; Color temperature; About color temperature; To control the light level of the image :; To determine the intensity of the color :; To adjust the red-green color balance of the image :; To adjust the detail and clarity of the image :; Color matrix
EN - 19 ENGLISH Image adjustment CONTRAST R COLOR TEMP.-USER 0 CONTRAST B 0 BRIGHTNESS R 0 BRIGHTNESS B 0 CONTRAST IMAGE 0 BRIGHTNESS 0 STANDARD 0 COLOR AUTO 0 XGA60 CineRichColor AUTO COMPUTER OFF TINT 0 SHARPNESS COLOR TEMP. GAMMA MODE COLOR MATRIX sRGB opt. 4. Press the or button to select th...
Page 20 - Adjustment of the image from the computer; Simple adjustment method
EN - 20 Adjustment of the image from the computer This projector adjusts the format of the video signal supplied from the computer. However, sometimes im- ages are not projected correctly owing to the type of the computer used. When the image from the computer isn ' t projected correctly, press the ...
Page 21 - Advanced features; Expand; EXPAND
EN - 21 ENGLISH Advanced features Expand By pressing the EXPAND button on the remote control, you can magnify the image to view the details. You can view the image in its original size in the REAL mode. • The EXPAND mode doesn't work with video or S-video signal. • The EXPAND mode doesn't function w...
Page 22 - Setting procedure; Set the background color
EN - 22 Advanced features (Continued) XD450U XD450U CAPTURE : ENTER X2 CANCEL : MENU CAPTURE : ENTER + ENTER CANCEL : MENU XD450U XD450U CAPTURE : ENTER X2 CANCEL : MENU Setting of the image displayed during startup or muting You can display your desired image as the startup screen (or splash screen...
Page 23 - Installation other device's remote commands; How to install; How to use the installed functions
EN - 23 ENGLISH Installation other device's remote commands You can install other device's remote commands in the remote control of this projector. How to install 1. Set the SELECT switch of the remote control of this projector to DVD or VIDEO, depending on the device you use. 2. Place the remote co...
Page 24 - Mouse remote control; Projector + computer with USB connector; Operation; USB; mouse pointer
EN - 24 Advanced features (Continued) Mouse remote control By connecting to personal computer through the USB port, you can operate your computer with the projector remote control. Projector + computer with USB connector Operation • You can use the mouse remote control function with a computer suppo...
Page 25 - Password function; To enable the password function:; • The screen for entering a password will appear.; To cancel the password function:
EN - 25 ENGLISH FEATUREPASSWORD FUNCTION XGA60 opt. LOCK UNLOCK OK OK PASSWORD CONFIRM O K CANCEL FEATUREPASSWORD FUNCTION XGA60 opt. LOCK UNLOCK OK OK PASSWORD O K CANCEL Password function This projector is equipped with the password function that is designed for prevention of theft and wrong op- e...
Page 26 - Lamp replacement; Reset of the lamp operation time; Interval of lamp replacement; When the lamp operation time exceeds 5000 hours*
EN - 26 Lamp replacement 9. Tighten up the screw (a) using a Phillips screwdriver (+) to secure the lamp cover. Reset of the lamp operation time Plug in the power cord, turn on the lamp, and reset the lamp operation time by keep pressing the , , and POWER buttons on the control panel at the same...
Page 27 - Troubleshooting; chart before contacting your dealer.; Cause and solution
EN - 27 ENGLISH Troubleshooting The following offers solutions to some of the common problems you may encounter. We suggest that you consult this chart before contacting your dealer. Images aren't projected on the screen. Problem Power isn't turned on. Images aren't projected on the screen. Images s...
Page 29 - Others; Use the remote control at least 10 cm away from the projector.; Problem; Attach the lamp cover on the bottom correctly.; Maintenance; Cleaning of the projector and the ventilation slots; • Do not spray insecticide on or inside the projector.; Cleaning of the lens
EN - 29 ENGLISH Others Cause and solution • This air comes out as a result of cooling the inside of the projector. This isn't a product malfunc- tion. • Check that the volume isn't set to low. • The microcomputers inside the projector may be wrongly operating because of noise. Press the POWER butt...
Page 30 - Indicators; Normal condition
EN - 30 Indicators POWER STATUS POWER Steady red Steady green Steady green STATUS Off Blinking green Steady green CONDITION Stand-by Lamp stand-by (about 1 minute) The power is on. (Normal condition) NOTE The POWER button cannot be used toswitch between on and off. POWER Steady green or Steady red S...
Page 31 - Specifications; Video compatibility; Kensington Lock; tor. Please contact Kensington Technology Group below.
EN - 31 ENGLISH Specifications TypeModelRated power supplyRated inputDisplay Technology ColorsProjection lensLight source lampPicture sizePC compatibility Video compatibility SpeakerS-video input Video inputAudio inputAnalog RGB input Digital RGB input(DVI-D24-pin)Control connector Outside dimensions...
Page 32 - IN
EN - 32 Specifications (continued) Connectors 1 R(RED)/C R 2 G(GREEN)/Y 3 B(BLUE)/C B 4 GND 5 GND 6 GND 7 GND 8 GND 9 DDC5V 10 GND 11 GND 12 DDC Data 13 HD/CS 14 VD 15 DDC Clock 1 TXD IN 2 - - 3 - - 4 GND - 5 5V IN 6 CLOCK OUT 7 RXD OUT 8 DATA OUT 1 3 5 2 6 8 1 5 11 6 10 15 61 245 310 100 5 SERIAL (8...
Page 34 - MITSUBISHI Projector Contact Information; Manufactured by Mitsubishi Electric Corporation; MITSUBISHI ELECTRIC CORPORATION
North America MESCA (Mitsubishi Electric Sales Canada Inc.) http://www.mitsubishielectric.ca Information Technologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2, Canada Sales Phone :+1-(905) 475-7728 Fax :+1-(905) 475-7958 E-mail :[email protected] Technical Phone :+1-(905) 475...
