Page 2 - CAUTION; : TO REDUCE THE RISK OF ELECTRIC; NO USER-SERVICEABLE PARTS INSIDE
EN-2 The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsu-lated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point wit...
Page 3 - ENGLIS; Contents; Trademark, Registered trademark; Declaration of Conformity
EN-3 ENGLIS H Contents Important safeguards................................................................................................................................ 4Overview..........................................................................................................................
Page 4 - Important safeguards
EN-4 Important safeguards Please read all these instructions regarding your projector and retain them for future reference. Follow all warnings and instructions marked on the projector. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated. 2....
Page 6 - Overview; Kensington Lock; Indicator
EN-6 Overview 1 FOCUS ring 2 ZOOM ring 3 Remote control 4 Air inlet grille 5 Speaker 6 Remote control sensor (Front) 7 Adjustment feet (front) 8 Remote control lock button 9 Kensington Lock 10 Remote control sensor (Top)11 Terminal board12 Air outlet grille13 Power jack14 Security lock Caution: Do n...
Page 7 - Bottom side; Cap RC lock button
EN-7 ENGLIS H Overview (continued) Bottom side 1 Adjustment feet 2 Lamp cover Remote control 1 ON button 2 KEYSTONE/VOLUME UP, DOWN buttons 3 MENU button 4 Direction buttons 5 ENTER button 6 COMPUTER button 7 VIDEO button 8 FREEZE button 9 AV (Audio/Video) MUTE button 10 ASPECT button11 AUTO POSITIO...
Page 8 - Remote control; For the first time use:
EN-8 Remote control This projector is equipped with two remote controls. One is installed on the top of the set; the other is come with the package. For the first time use: 1. To release it from the set, press the remote control lock button, and the remote control will eject automatically. 2. Remove...
Page 9 - Installation; Layout of the projector; Front projection
EN-9 ENGLIS H Installation Layout of the projector Image size varies depending on the distance between the screen and the projector. Front projection • The above figures are approximate and may be slightly different from the actual measurements. Front projection, ceiling mounting For ceiling mountin...
Page 10 - Basic connections; Projector + AV device
EN-10 Basic connections This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors. Important: • Make sure that the connected device is turned off before starting connection. • Plug in the power cor...
Page 11 - Projector + Computer; For computer with Mini D-SUB; For Macintosh
EN-11 ENGLIS H Basic connections (continued) Projector + Computer For computer with Mini D-SUB For analog connection: 1. Connect one end of the supplied RGB cable to the COMPUTER IN terminal of the projector. 2. Connect the other end of the RGB cable to the monitor port of the computer. For monitor ...
Page 12 - Preparation; Preparation for projection; In the following cases:
EN-12 Preparation Preparation for projection 1. Attach the provided power cord to the projector. 2. Plug the power cord in the wall outlet. 3. Remove the lens cap. Warning: • Do not look into the lens directly when the projector is on. • The lens cap is for protecting the lens. If you leave the lens...
Page 13 - Basic operation; When fine streaks are seen on projected images; FOCUS
EN-13 ENGLIS H Basic operation Power-on 1. Turn on the device connected to the projector first. 2. Plug the power cord in the wall outlet. • The POWER indicator lights up. • If the power cord is unplugged from the wall outlet before the projector is cooled down completely after use, it can happen th...
Page 14 - With the Picture menu:
EN-14 Basic operation (continued) Power-off Use the following procedure to turn off the projector.The lamp may deteriorate if the projector is powered off and on repeatedly within 30 minutes after the lamp is lighted. 1. Press the STANDBY button on the remote control. • The message "Power Off? P...
Page 15 - Menu operation
EN-15 ENGLIS H Menu operation * Menus are not displayed when no signal is supplied to the projector. *1 Default setting varies depending on input signals. *2 Available only when the input signal is PC or Video or S-Video 4/5 line component signal. *3 Setting value varies depending on the setting of ...
Page 18 - Factory Default menu
EN-18 Menu operation (continued) 5. Setting menu 6. Language menu 7. Factory Default menu Menu option Setting Feature description Menu Position 5 options Choose the menu location on the display screen. Mounting 4 options Adjust the picture to match the orientation of the projector: upright or upside...
Page 19 - Image adjustment; To adjust the brightness and contrast:; To adjust the color setting:; To sharpen or soften the projected image:
EN-19 ENGLIS H Image adjustment You can adjust projected images by using Picture and Video Image menus. To adjust the brightness and contrast: You can make adjustments of the brightness of the projected image using the menu.(See page 16 for the menu options.)1. Display the Picture menu. 2. Select Br...
Page 20 - Lamp replacement; Reset of the lamp operation time; Interval of lamp replacement
EN-20 Lamp replacement This projector is equipped with a lamp to project images. This lamp is a consumable. It may burn out or its brightness may decrease during use. In such cases, replace the lamp with a new one as soon as pos-sible. Be sure to replace the lamp with a new lamp separately sold that...
Page 21 - Troubleshooting; No image appears on the screen.
EN-21 ENGLIS H Troubleshooting Before asking for repair of the projector, check the following. If the symptom persists, stop using the projector, be sure to unplug the power plug, and then contact your dealer. No image appears on the screen. Problem Solution Power can not be turned on. • Check wheth...
Page 22 - Images are not displayed correctly.
EN-22 Troubleshooting (continued) Images are not displayed correctly. Problem Solution Projected images are shaking.Projected images are displaced. • Check that the cable connected to the external device isn’t intermittent. • Connect the cable’s plug with the external device’s connector firmly. • Pr...
Page 23 - Others; Cleaning of the projector and the ventilation slots; Cleaning of the lens
EN-23 ENGLIS H Troubleshooting (continued) Others If the following problem occurs after the lamp is replaced, check the following first. Maintenance Warning: Do not use flammable solvents (benzene, thinner, etc.) and flammable aerosols when cleaning the projector body and lens. Flammable substances ...
Page 24 - Indicators; Normal condition
EN-24 Indicators This projector has two indicators, each of which shows the operation condition of the projector. The following offer solutions to possible problems. If these problem persist, turn the projector off and consult your dealer. Normal condition Abnormal condition POWER STATUS CONDITION N...
Page 25 - Specifications
EN-25 ENGLIS H Specifications • The specifications and outside appearance of the projector are subject to change without prior notice. Type DLP™ DATA projector Model XD211U Rated power supply 100 - 240 V AC, 50 / 60 Hz Rated input 2.5 A Display Technology 0.55-inch Single chip Digital Micromirror De...
Page 26 - Replacement part
EN-26 Specifications (continued) Connectors Dimensional drawings (unit : mm) What’s included in the box Replacement part 1 5 11 6 10 15 pin No. Spec. 1 R(RED)/C R 2 G(GREEN)/Y 3 B(BLUE)/C B 4 NC 5 GND 6 GND 7 GND 8 GND 9 DDC5V 10 - 11 - 12 DDC Data 13 HD/CS 14 VD 15 DDC Clock pin No. Spec. 1 R(RED) ...
Page 28 - MITSUBISHI Projector Contact Information; MITSUBISHI ELECTRIC CORPORATION
EN-28 MITSUBISHI Projector Contact Information 1 Zusho Baba, Nagaokakyo-City, Kyoto Japan MITSUBISHI ELECTRIC CORPORATION North America MESCA (Mitsubishi Electric Sales Canada Inc.)http://www.mitsubishielectric.caInformation Technologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2, CanadaSales...
