Page 2 - NOTE TO CATV SYSTEM INSTALLER:; CAUTION; RISK OF ELECTRIC SHOCK DO NOT OPEN; STAND REQUIREMENT
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated “dangero...
Page 3 - Contents; Chapter 1 Television Overview
Contents Chapter 1 Television Overview TV Accessories............................................................................................................. 8 Special Features ........................................................................................................... 8 Front Co...
Page 4 - IMPORTANT SAFEGUARDS; Read, Retain and Follow All Instructions
4 5 IMPORTANT SAFEGUARDS Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain the ...
Page 5 - (e) If the TV has been dropped or the cabinet has been damaged.; Replacement Parts; IMPORTANT SAFEGUARDS, continued
4 5 power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 13. Overloading Do not overload wall outlets and extension cords...
Page 6 - Chapter; bring you many hours of enjoyment.; Thank You for Your Purchase
6 Chapter Welcome to the wonderful and exciting world of digital television! We are honored that you chose Mitsubishi as your premier home entertainment partner. The development team at Mitsubishi Digital Electronics America (MDEA) understands that our customers demand and expect the very best. MDEA...
Page 7 - Television Overview
6 Chapter 1 Television Overview TV Accessories ........................................................................... 8Special Features ......................................................................... 8Front Control Panel....................................................................
Page 8 - Special Features; Your new High Definition (HD) upgradeable; High Definition DLPTM Display System; Your widescreen Mitsubishi HDTV uses Texas; PIP/POP Viewing Option; Your Mitsubishi remote control can be programmed to; TV Accessories; Remote Control; AAA Batteries; Air Circulation Tip
8 9 Special Features Your new High Definition (HD) upgradeable widescreen television has many special features that make it the perfect addition to your home entertainment system. These special features include: High Definition DLP™ Display System Your widescreen Mitsubishi HDTV uses Texas Instrumen...
Page 9 - Indicators; COLOR; This input can be used for convenient connection of a camcorder or; Front Control Panel
8 9 The buttons on the Front Control Panel highlighted in gray are duplicated on the remote control. The top row of labels show the control functions when there are no TV menus displayed on the screen. The bottom row of labels show the control functions when the TV menus are displayed on the screen ...
Page 10 - Back Panel; out to another device, such as a cable box or VCR.; Back Panel Input/Output
10 Chapter A N T - A A N T - B L O O P O U T Back Panel C O M P O N E N T 4 80 i / 4 80 P/ 1080i 2 1 Y P r Pb A U D I O -R I G H T L E F T / ( M ONO ) A U D I O - V H DTV ( Y PbPr/ GBRH V ) 4 8 0 i / 48 0 P /10 8 0 i I N P U T 2 1 A U D I O - R I G H T A U D IO- L E F T / (MONO) V I D E O S-V IDEO M...
Page 11 - Additional connection cables are not; Connecting
10 Chapter Additional connection cables are not provided with the TV. They should be available at most electronic stores. 2 Connecting Antenna .......................................................................................... 12 Wall Outlet Cable ................................................
Page 12 - Separate UHF and VHF Antennas; Connect the UHF and VHF antenna leads to the; UHF/VHF combiners are not provided with the TV. They; Twin Lead Antenna, Coaxial Lead; For antenna with twin flat leads:; 00 Ohm to 75 Ohm matching transformers are not; For cable or antenna with coaxial lead:; Connecting an Antenna or Wall Outlet Cable
12 13 Separate UHF and VHF Antennas (Figure 1) 1. Connect the UHF and VHF antenna leads to the UHF/VHF combiner. 2. Push the combiner onto ANT-A on the TV back panel. UHF/VHF combiners are not provided with the TV. They are available at most electronic stores. Note: This TV will only be able to prov...
Page 13 - Connecting an Antenna to a Cable Box or VCR; Antenna to a Cable Box; Antenna to a VCR; Connect two coaxial cables as follows:
12 13 Figure 3. Connecting the cable box. ��� ��������� ������������������������������� �� �������������� � ������������������������������� � � � � � � � � � � � � � � � � � � � �������������� �� ��� ������� �������������� ������������������������������� � � � � � � � � � � � � � � � � � � � � � ���...
Page 14 - Figure 6. Connecting Composite Video and Audio.; Antenna to Cable Box and VCR; Connect three coaxial cables as follows:; For best performance, connect the audio as
14 15 Connecting an Antenna to a Cable Box and VCR, Connecting Composite Video or S-Video with Audio AUDIO OUT AUDIO IN VIDEO OUT (Y/C) MONITOR 1 L R L R 1 2 Cable box or VCR back panel Attach only one cable type 1 Attach only one cable type 1 2 2 White Red White Red TV back panel (section detail) I...
Page 15 - Stereo Audio System; Please see your A/V receiver Owner’s
14 15 �� ���� ����� �������� ������� � � � � � � � � � � � � � � � � � � � � � ��� � � � � � ������ � � � � � ��� ���� ��� � � �� ��� ������ ������� ������ ���� ��� ����� ���� ������ ����� ��� ��� ����� ������ �� �������� ����� ����� �������� � � � � � � �� ���� ����� �������� ������� ��� ��� ����� ...
Page 16 - Connecting a DVD Player or Other S-Video Device; For digital audio connections, see your; Connect an S-Video cable from VIDEO OUT on the
16 17 DVD Player with Component Video (Recommended) (Figure 9) 1. Connect the Component Video cables from (Y Cb Cr or Y Pb Pr) VIDEO OUT on the back of the DVD player to COMPONENT (1 or 2) on the TV back panel. The correct connections are: A. Y to Y B. Cb or Pb to Pb C. Cr or Pr to Pr 2. Connect a s...
Page 17 - Connecting a DTV Receiver; DTV Connectors and Adaptors; Figure 12. Connecting the DTV receiver with
16 17 Connecting a DTV Receiver DTV Connectors and Adaptors (Figure 11) The TV back panel has 5 RCA-type connectors for the DTV connection. The back panel of your DTV receiver may use RCA-type connectors or BNC-type connectors. If your DTV receiver comes with BNC type connections, you will need to p...
Page 18 - Connecting a DTV Receiver, continued; DO NOT
18 19 Connecting a DTV Receiver, continued DTV Receiver with RGB VideoConnections (Figure 13) 1. Connect the outside antenna, cable, or satellite to ANT or SATELLITE IN on the DTV receiver (see your DTV receiver owner’s guide for instructions and cable compatibility). 2. If your DTV receiver has a b...
Page 19 - Connecting MonitorLinkTM/DVI; Figure 14. Connecting MonitorLink; The Monitor Link/DVI input uses a DVI-I Dual Link; Connect a MonitorLink/DVI cable from the TV back
18 19 Connecting MonitorLink™/DVI Figure 14. Connecting MonitorLink MonitorLink/DVI (Figure 14) The Monitor Link/DVI input uses a DVI-I Dual Link connector for maximum cable flexibility. When MonitorLink is used as a DVI-HDCP input, the terminal is compliant with DVI-D Single Link signals matching E...
Page 20 - See Operation of PIP and POP, page 56, for operating instructions.; Main
20 Chapter How Connections Affect the PIP (Picture-In-Picture) and POP (Picture-Outside-Picture) To see a picture in the PIP or POP, you may need to select an input source. If the only input connected is ANT-A, then both the main picture and the PIP/POP will be from that input source. If other video...
Page 21 - Remote Control Functions
20 Chapter 3 Remote Control Functions Overview of the TV Layer Buttons .............................................. 22 Care and Operation ...................................................................... 23Channel Selection ........................................................................
Page 22 - Remote Control Functions:; Overview of the TV Layer Buttons; Overview
22 23 Remote Control Functions: Overview of the TV Layer Buttons Overview (Figure 1, following page,) 1. Slide Switch: Select A/V product to be controlled by the remote control. 2. Numbers: Individually select channels or input information into TV. 3. POWER: Turns power on and off for TV and other c...
Page 23 - Operation; Installing the Batteries:; For Best Results from the Remote Control:; Operating the Remote Control:; Remote Control Functions: Care and Operation
22 23 size AAA batteries A A A A A A Figure 2. Installing the batteries. Figure 1. Remote Control Functions. Operation Installing the Batteries: (Figure 2) 1. To remove the back battery cover, gently press the ridged tab in the direction of the arrow and slide the cover off. 2. Load the batteries, m...
Page 24 - Channel Selection, Sleep Timer; Channel Selection; Setting the Sleep Timer:; Figure 4. On-screen display for sleep timer; Note; Figure 3. Sleep button on remote control
24 25 Remote Control Functions: Channel Selection, Sleep Timer Channel Selection • Enter three numbers (for channel 2, press 002). or • Press the channel number and ENTER (for channel 2, press 2, then ENTER). or • Enter the channel number and wait four seconds (without pressing ENTER). The TV will c...
Page 25 - Figure 3. Programming the remote to control your VCR.; VCR Codes; Use of the Remote Control with Other A/V Products; Press and hold the POWER button on the remote control.; CHANNEL or the number buttons.; Figure 1. Programming the remote to control your; Cable Box Codes; Figure 2. Programming the remote to control your; Satellite Receiver Codes; DVD Player Codes
24 25 When set to TV, the PLAY, STOP, REW/REV, and FF/FWD buttons will operate the VCR after the VCR codes have been properly programmed into the remote control. Figure 3. Programming the remote to control your VCR. POWER Code to enter: To reset to default code, enter 000 VCR brand MitsubishiHitachi...
Page 26 - Use of the Remote Control with Other A/V Products, continued; Some manufacturers may change their
26 27 If the slide switch is set to TV when you enter an A/V receiver code, VOLUME and MUTE will control the A/V receiver rather than the TV. To return volume and mute control to the TV, set the slide switch to TV, press and hold POWER and enter 000. Figure 5. Programming the remote to control your ...
Page 27 - Remote Control Functions: Special Functions; performed on each layer may vary. The most common functions are:
26 27 Remote Control Functions: Special Functions When your remote control has been programmed to operate another manufacturer’s product, the function performed on each layer may vary. The most common functions are: VCR • POWER• CHANNEL up/down• PLAY• REC• PAUSE• STOP• FF/FWD• REW/REVMitsubishi VCRs...
Page 28 - How Connections Affect the PIP and POP; Activating the PIP and POP; three POPs; Remote Control Operation of PIP and POP
28 Chapter Picture-In-Picture (PIP) and Picture-Outside- Picture (POP) features allow you to view programming in different ways. While watching the main screen, you can display programs from other channels and other inputs. To see which inputs can and cannot be used together, see How Connections Aff...
Page 29 - Menu Screen Operations
28 Chapter 4 Menu Screen Operations The ViewPoint® Menu System .................................................... 30MAIN Menu .................................................................................. 31SETUP Menu................................................................................
Page 30 - INFO; HOME; Mitsubishi’s exclusive
30 31 A picture (icon) will be highlighted and can be selected using the remote control’s ADJUST arrows. When selected, the appropiate menu will appear or start an automatic function. You may then make changes within the menu or access available sub-menus. A highlighted square button indicates that ...
Page 31 - Main Menu Screens: Overview; SETUP Menu; Figure 3. SETUP menu; CHANNEL EDIT Menu; Figure 4. CAPTIONS menu
30 31 Main Menu Screens: Overview SETUP Menu (Figure 3) Basic (initial) setup instructions and functions are available through the SETUP submenu screens. Use this menu when you relocate the TV, experience a power loss or when devices are added after initial setup. • Memorize channels • Assign Input ...
Page 32 - AUDIO/VIDEO SETTINGS Menu; Figure 7. ADVANCED FEATURES Menu; ADVANCED FEATURES Menu; Figure 6. V Chip Lock Menu
32 33 AUDIO/VIDEO SETTINGS Menu (Figure 8) Adjust some or all of the A/V settings. Each input can be set to your preferences. A/V Reset on the menu allows you to return the A/V settings for the current input to the factory presets. A/V Reset on the front control panel resets all inputs at one time. ...
Page 33 - Input Assignment; Memorize Channels; Figure 9. Memorize Channels Menu; INPUT ASSIGNMENT Menu; Figure 11. Input Assignment Menu
32 33 SETUP Menu: Memorize Channels, Memorize Menu, Input Assignment SETUP menu Memorize Channels : Ant A Air INPUT ASSIGNMENT CLOCK Language : English (Idioma) Energy Mode : Standard or change option ENTER for menu MENU to return ADJUST to select MAIN MENU Memorize Channels (Figure 9) Select Memori...
Page 34 - SETUP Menu: Manually Setting the Clock; The Clock Setting menu default allows the clock time; Set Day; After manually selecting the current time, select the
34 35 SETUP Menu: Manually Setting the Clock Figure 13. Set Day CLOCK menu Clock Setting : Manual Clock Time : 12:00 PM Set Day : Sunday Time Zone : N/A Daylight Savings : N/A Time MAIN MENU SETUP MENU or change option MENU to return ADJUST to select Figure 12. Clock Time Clock Setting (Manual) (Fig...
Page 35 - provides this service.; Time Zone; Ignore = does not use DST; SETUP Menu: Automatically Setting the Clock; Figure 15. Time Zone; Figure 16. Daylight Savings Time
34 35 Clock Setting (Auto) (Figure 14) Set the Clock Setting to Auto to automatically set the day and time using Extended Data Service (XDS) time data. This data is automatically retrieved when tuned to a PBS channel or other channel in your area that provides this service. Time Zone (Figure 15) Sel...
Page 36 - Language; TV, you were requested to select an on-screen menu; Energy Mode; The Standard setting has a faster turn on; Figure 19. Energy Mode
36 37 Language (Figure 17) Display the on-screen menus in either English or Spanish (Español). The first time you powered On your TV, you were requested to select an on-screen menu language. If you choose to change the selection, all menu text will immediately switch to the language of your choice. ...
Page 37 - CAPTIONS Menu: Overview; CAPTIONS Menu; Turn On or Off the closed caption decoder, select; Figure 20. CAPTIONS menu
36 37 CAPTIONS Menu: Overview CAPTIONS Menu (Figure 20) Turn On or Off the closed caption decoder, select the type of captions or text, and choose black or translucent gray as the background color for the closed caption area. Broadcasters can send either Standard or Text closed captioning. Standard ...
Page 38 - CAPTIONS Menu: Closed Captions, Background Color; Figure 21. Closed Captions; Figure 22. CAPTIONS menu; Closed Captions; Display one of the following types of Closed Captions:; The content of captions is determined; CC Background
38 39 CAPTIONS Menu: Closed Captions, Background Color CAPTION MENU Closed Captions : On if mute CC Background : Gray or change option MENU to return ADJUST to select MAIN MENU Figure 21. Closed Captions SETUP MENU Closed Captions : On if mute CC Background : Gray or change option MENU to return ADJ...
Page 39 - You can also select channels by using the CHANNEL; CHANNEL EDIT Menu: Antenna, Channel Selection; Figure 23. Antenna
38 39 Antenna (Figure 23) Select Ant-A or Ant-B. For each antenna, you can add or delete channels in memory, name channels, and add channels to the SQV (SuperQuickView™) list. Channel (Figure 24) Select to edit the channel selections. You can add or delete from memory, name, or add to the SQV (Super...
Page 40 - CHANNEL EDIT Menu: Memory, Name Selection
40 41 CHANNEL EDIT Menu: Memory, Name Selection Name (Figure 26) Name channels shown on Ant-A or Ant-B (up to four characters). After you enter a name, it will appear on the TV screen next to the channel number. 1. Select Ant-A or Ant-B. 2. Select the memorized channel you want to name. 3. Press ADJ...
Page 41 - CHANNEL EDIT Menu: Using SQV; SQV Using The Menu Screen; To change SQV choices using the menu:; SQV Using The Remote Control; To change the SQV banks using the remote control:; Figure 28. SQV button on the remote control
40 41 CHANNEL EDIT Menu: Using SQV (Super Quick View ™ ) SQV Using The Menu Screen (Figure 27) Put together a list of your favorite channels from Ant-A and Ant-B using SQV (SuperQuickView™). Store up to 6 channels in each of the 9 different memory banks. After adding a channel to the SQV memory, “SQ...
Page 42 - V-Chip Signal Information; V-Chip cannot block the program or movie.; Used for programs that are not
42 43 V-Chip Lock Menu: Overview V-Chip Signal Information When provided by the broadcaster, V-Chip ratings can be used to control which programs can be viewed or will be blocked. When V-Chip ratings are sent, you will see the ratings when you change the channel or when you press the INFO button on ...
Page 43 - Passcode; Setting Up the V-CHIP LOCK Passcode; Figure 29. First time entry to the V-CHIP LOCK; Entering the Passcode
42 43 V-CHIP Menu: Setting Up and Using V-Chip Lock Passcode Setting Up the V-CHIP LOCK Passcode (Figure 29) Select V-CHIP LOCK from the MAIN menu for first time setup or after you have canceled your passcode. You will see the screen shown in Figure 29. Use the number buttons on the remote control t...
Page 44 - Front Button Lock; Rating Menu; Figure 33. V-CHIP LOCK Menu Lock by Time; LOCK by Time; Selecting V-Chip Rating Menu; Figure 34. Front Button Lock
44 45 Front Button Lock (Figure 34) Setting the Front Button Lock to On will disable controls on the front panel to prevent anyone from accidentally changing settings. Off will restore the operations of the front panel buttons. V-CHIP Menu: Locking by Time, Front Button Lock, V-Chip Rating Menu V-CH...
Page 45 - Allowing or Blocking by Ratings; Figure 36. Ratings Menu; V-CHIP Start Time and
44 45 V-CHIP Menu: Allowing or Blocking Ratings, Lock by Time Allowing or Blocking by Ratings (Figure 36) Block or Allow programs based upon rating signals sent by the broadcasting station. The factory preset for TV Ratings is TV-PG (Parental Guidance) allowing only programs rated TV-PG or lower. Th...
Page 46 - Figure 38. COLOR BALANCE; Figure 39. Auto Color Correction; Auto Color Correction
46 47 PerfectColor (Figure 40) Certain TV channels may appear more green or red than others. This is not a malfunction of the TV and may vary by channel or broadcaster. The PerfectColor menu allows you to adjust color settings based on your preferences. PerfectColor is only available when Auto Color...
Page 47 - Time; You must set the TV clock before you; TIMER menu; The timer can be turned On or Off. When On, you; Set Time; The timer will automatically turn the TV on (if it is off)
46 47 ADVANCED FEATURES Menu: TIMER, Timer Menu, and Set Time You must set the TV clock before you can set the timer. If you have not set the clock and/or day, you will see the CLOCK menu instead of the Timer menu. TIMER menu (Figure 42) The timer can be turned On or Off. When On, you need to select...
Page 48 - Select the days that the TV will turn on automatically.; Input
48 49 ADVANCED FEATURES Menu: Set Day, Input, and Channel Set Day (Figure 44) Select the days that the TV will turn on automatically. You can select Everyday, Mon-Fri (Monday through Friday), or the individual days of the week. Input (Figure 45) Select the input to use when the timer turns on the TV...
Page 49 - The contrast in dark scenes is enhanced for better; Figure 51. Video Mute; Figure 52. Black Enhancement
48 49 Video Mute (Figure 51) Video Mute, (when On) lets you display a blue background when no signal is being received on Inputs 1-3, DTV, Component 1-2 and MonLink. Black Enhancement (Figure 52) The contrast in dark scenes is enhanced for better picture quality. Brighter scenes will not be affected...
Page 50 - AUDIO SETTINGS and VIDEO
50 51 AUDIO/VIDEO SETTINGS Menu: Overview AUDIO/VIDEO SETTINGS Menu (Figure 53) Each input has its own A/V memory. You can adjust each input’s A/V memory in two ways. You can use the menu or the remote control. A/V Memory Reset A/V Memory Reset will return the currently selected input’s A/V memory t...
Page 51 - Audio Settings; Bass; A slider will display on-screen for each setting.
50 51 Audio Settings • Bass Enhances or reduces low frequency sound. • Treble Enhances or reduces high frequency sound. • Balance Adjusts the level of sound between the left and right speakers. • Surround Creates simulated stereo and surround effects. Your choices are: Off: No surround effects. Use ...
Page 52 - Video Settings; A slider will display on-screen for each
52 Chapter AUDIO/VIDEO Setting Descriptions: Video Video Settings A compressed (non-HD) video signal may cause what appears to be a “blurry”, “out of focus” or “fuzzy “ picture on a widescreen TV. This is not a malfunction of the TV, but a result of the compressed signal that is sent by cable or sat...
Page 54 - usually marked “Anamorphic” or “Enhanced for 16:9 TVs.”; Available On-Screen Format Sizes; Stretch
54 55 INPUTS Standard 480i/480p 1080i Zoom Stretch Narrow Ant-A 000 YES YES NO YES YES YES Ant-B 000 YES YES NO YES YES YES DTV (480i/480p) YES YES NO YES YES YES DTV (1080i) YES NO YES NO NO NO Input-1 YES YES NO YES YES YES Input-2 YES YES NO YES YES YES Input-3 YES YES NO YES YES YES Component-1 ...
Page 55 - Available On-Screen Format Sizes, continued
54 55 Widescreen Picture (480i/480p) Standard (Recommended) Expand Zoom (For letterbox 2.35:1 DVDs) Narrow (Not Recommended) Stretch Widescreen Picture (16:9 - HD 1080i only) Example: A True HD Broadcast Standard (Recommended) HD Expand (Recommended for 4:3 images with Black Side Bars) Stretch Plus ...
Page 56 - Operation of PIP and POP; Ant-2 or strobe pictures from other A/V components
56 57 Operation of PIP and POP Changing PIP/POP Inputs Press PIP INPUT to browse through available PIP or POP images. Changing PIP/POP Channels Press PIP CH to scroll up or down through memorized channels on the Ant-A and Ant-B. Exchanging Program Images Press ENTER/EXCH to exchange the main picture...
Page 57 - Bypassing the V-Chip Lock; When changing or deleting your
56 57 Appendix A: Bypassing the V-Chip Lock Bypassing the V-Chip Lock After you set the lock, you need your passcode to view a V-Chip locked program, view the locked TV, cancel the lock, or enter the V-Chip lock menus. If you forget your passcode, you can view the locked TV without entering your pas...
Page 58 - This page intentionally blank
Page 60 - Appendix C: Remote Control Programming Codes
60 61 Mitsubishi ................ 010, 011, 012, 013, 014, 360Admiral ..................... 220Aiwa.......................... 225, 226, 241 B & K ........................ 352Bose ......................... 351Denon ...................... 234, 235, 236, 245, 246, 359, 361 Fisher .....................
Page 62 - Appendix D: Cleaning and Service; Cleaning; • Clean the entire screen evenly, not just sections of the screen.; General Cleaning Warnings:; • DO NOT spray liquids or cleaners directly on the TV’s surfaces.; Service
62 63 Appendix D: Cleaning and Service Do not use any kind of abrasive or liquid Cleaner on the surface of the TV screen. Cleaning Normally, light dusting with a dry, non-scratching duster will keep your TV clean. If cleaning beyond this is needed, please use the following guidelines: First, turn of...
Page 63 - Cleaning the Dust Filter; Clean the filter annually and whenever you; Appendix E: Cleaning the Dust Filter
62 63 Cleaning the Dust Filter Clean the filter annually and whenever you replace the lamp cartridge. Tools needed: Phillips screwdriver 1. Turn the television off and unplug the AC cord. 2. Locate the dust filter on the left side panel of the TV. 3. Using a Phillips screwdriver, remove the two scre...
Page 64 - Appendix F: Lamp Cartridge Replacement; Before you replace the lamp cartridge please note the following:; for one hour before attempting to replace the lamp cartridge.
64 65 Appendix F: Lamp Cartridge Replacement Before you replace the lamp cartridge please note the following: CAUTION: If the television is on, press POWER to turn off and allow the television to cool for one hour before attempting to replace the lamp cartridge. LAMP LIFEThe light source for this te...
Page 65 - Replacing the Lamp Cartridge; Tool needed: Phillips screwdriver; The three screws will not completely remove .
64 65 Appendix F: Lamp Cartridge Replacement Replacing the Lamp Cartridge Tool needed: Phillips screwdriver 1. Turn the television off and unplug the AC cord. 2. Remove the front speaker grill by gently pulling on each side. The grill will snap out. 3. Using a phillips screwdriver, remove the three ...
Page 66 - Troubleshooting; Problem
66 67 Troubleshooting Problem Possible Solution 1. The TV remote control does not work. • Check that the batteries are installed correctly. • Check that the selected switch is set to “TV”. • Be no further than 20 feet from the TV when using the remote control. 2. The TV takes several seconds to resp...
Page 68 - Antenna; Index
68 69 A A/V Memory Reset 50Receiver, Connecting 15 Activating the PIP and POP 28Advanced Features Menu 32, 46-49Antenna Channel Edit Menu 39-40Connecting 12, 13, 14 Appendices A: Bypassing the V-Chip Lock 57B: High Definition Input Connection Compatibility 59C: Remote Control Programming Codes 60-61...
Page 69 - Use of the Remote Control with Other A/V Products 25-26
68 69 Setup 33-36V-Chip Lock 42-45 MonitorLink, Connecting 19Moving PIP Images 56 N Name Menu 40 P PerfectColor™ 46PIP and POP Activating 28Changing 56Freezing 56How Connections Affect 20Operation 56 POP “Live” Image, Selecting 56 R Remote Control Functions Channel Selection 24Operation 23PIP and PO...
Page 70 - Mitsubishi DLPTM Projection Television Limited Warranty; except as specifically authorized by MDEA.
70 71 Mitsubishi DLP™ Projection Television Limited Warranty MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants as follows to the original purchaser of this television that if purchased from an authorized MITSUBISHI Audio/Video Dealer, should it prove defective by reason of against defec...
Page 71 - MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.
70 71 c. Proof of purchase date from an authorized MITSUBISHI dealer is required when requesting warranty service. Present your sales receipt or other document which establishes proof and date of purchase. THE RETURN OF THE OWNER REGISTRATION CARD IS NOT A CONDITION OF WARRANTY COVERAGE. However, pl...