Mitsubishi Electric SRR60ZJ-S1 - Manual

– 4 – ❚ Safety precautions CAUTION • Do not touch the aluminum fins on theair heat exchanger. It may result in injury. • Do not place household electricalappliances or household items underneath the indoor or outdoor units. Condensation falling from the unit maystain objects and cause accidents orel...

– 5 – ❚ PRECAUTIONS FOR RELOCATION OR REPAIRS WARNING • Do not perform any repairs or modifications by yourself. Consult the dealer ifthe unit requires repair. If you repair or modify the unit, it can cause water leaks, electric shocks or fire. • Consult your dealer for repairs. Wrong repairs could ...

– 6 – Name of each part and its function INDOOR UNIT OUTDOOR UNIT Air outlet Air inlet (On side & rear surface) Outdoor unit fan Heat exchanger Wireless remote control Page 9 Drain hose Drains water from the indoor unit. Air outlet Air blows out of here. Remote control signal receiver Air inlet ...

– 7 – Unit display section Name of each part and its function • Buzzer sound for remote control When preset temperature 24°C, automatic operation and automatic airflow are selected, the buzzer sound (PiPi) is produced.When turning off the air conditioner by pressing ON/OFF button (except CLEAN mode)...

– 8 – Remote control handling Replacing the batteries The following cases signify exhausted batteries. Replace old batteries with new ones. • Receiving beep is not emitted when a signal is transmitted. • Display fades away. NOTE • Do not use old and new batteries together. • Remove the batteries whe...

– 9 – Transmission procedure When each button on the remote control is pressed – with the remote control pointing towards the air-conditioner unit a signal is transmitted.When the air-conditioner receives the signal correctly, it will beep. NOTE 2 Current time setting ■ When inserting the batteries,...

– 10 – AUTO HI MED LO • When changing FAN SPEED from HI to LO, the sound ofrefrigerant flowing may be heard. NOTE Temperature adjustment during AUTO ■ Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the button or the button. Duri...

– 11 – COOL/HEAT/DRY mode operation Airflow direction adjustment procedure. Page 14 Point the remote control toward the air-conditioner, and Press the MODE select button. Move the [ mark] to the required operation position. (Cool), (Heat), (Dry) Press the ON/OFF button. Press the TEMP button. Press ...

– 12 – ■ If it is pressed while the unit is off SLEEP TIMER operation starts with the previous operation settings, and the airconditioning is turned off after the set time elapses. ■ If it is pressed while the unit is running The air conditioner is turned off after the set time elapses.Every time th...

– 15 – HIGH POWER/ECONOMY operation 2 1 (HIGH POWER) (ECONOMY) (Normal operation) (ECONOMY) (Normal operation) Concerning HIGH POWER operation Pressing the HI POWER/ECONO button intensifies the operating power and initiates powerful cooling or heating operation for 15 minutes continuously. The remot...

– 16 – SELF CLEAN operation 1 In order to active CLEAN operation, press the CLEAN switchwith the tip of a ballpoint pen. Every time the CLEAN switch is pressed, the display is switchedin the order of: No display ■ CLEAN operation should be run after AUTO, COOL and DRY operation to remove the moistur...

– 17 – Turn off the power supply. Maintenance Do not use the following articles: • Hot water (40°C or more)It may deform or discolour the unit. • Petrol, paint thinner, benzine or cleanser,etc.They may deform or scratch the unit. Do not touch the aluminum fins on theheat exchanger. Before maintenanc...

– 18 – Proper installation Pay attention to operating noises! • When you install the unit, take care to choose a place that can comfortably stand the weight of the unit and does not increase the operating noiseor vibration. If vibration is transmitted through the house, fix the unit with the aid of ...

– 19 – Airflow is not blown out for 5 to 10 min. or blown out notwarm wind for a moment at HEATING operation. RUN light blinks slowly (1.5 sec ON, 0.5 sec OFF) Notice T h e u n i t d o e s n o t r e s t a r t i m m e d i a t e l y a f t e r y o u h a v estopped it. (RUN light is on) Not operating? A...

– 20 – Contact your dealer ■ Turn off the power switch immediately and inform your dealer in any of the following situations: The fuse or switch blows continu-ously. The cable becomes extremely hot.The covering of the cable is cracked. T h e T V , r a d i o o r o t h e r e q u i p m e n tstarts to m...

– 21 – Self diagnosis function ■ We are constantly trying to do better service to our customers by installing such judges that show abnormality of each function as follows: Outdoor temperature sensor error • Broken outdoor sensor wire, poor connector connection Description of trouble Room temperatur...

USER’S MANUAL AIR-CONDITIONER RJD012A200G SRR25ZJ-SSRR35ZJ-SSRR50ZJ-SSRR60ZJ-S1 AIR-CONDITIONING & REFRIGERATION DIVISION 3-1, Asahi, Nishibiwajima-cho, Kiyosu, Aichi, 452-8561, Japanhttp ://www.mhi.co.jp MITSUBISHI HEAVY INDUSTRIES AIR-CONDITIONING EUROPE, LTD. 7 Roundwood Avenue, Stockley Park...