Page 2 - CAUTION; TO REDUCE THE RISK OF ELECTRIC SHOCK,; This apparatus must be grounded.
EN – 2 RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intendedto ale...
Page 3 - ENGLISH; Contents; Trademark, Registered trademark
EN – 3 ENGLISH Contents Important safeguards ........................................................................... 4 Overview ............................................................................................... 6 Using the remote control ................................................
Page 4 - Important safeguards
EN – 4 Important safeguards Please read all these instructions regarding your LCDprojector and retain them for future reference. Followall warnings and instructions marked on the LCD pro-jector. 1. Read instructionsAll the safety and operating instructions shouldbe read before the appliance is opera...
Page 5 - Never remove the cabinet.
EN – 5 ENGLISH WARNING:Unplug immediately if there issomething wrong with your projector. Do not operate if smoke, strange noise or odor comesout of your projector. It might cause fire or electricshock. In this case, unplug immediately and contactyour dealer. Never remove the cabinet. This projector...
Page 6 - Overview; Control panel
EN – 6 Overview 1 2 3 4 5 8 9 10 11 12 6 7 POWER LAMP VOLUME TEMP VIDEO ENTER MUTE MENU SOURCE COMPUTER AUTO POSITION 5 6 9 10 3 1 4 11 12 13 8 7 2 1 2 3 4 5 6 7 8 OI S-VIDEO VIDEO AUDIO L (MONO) AUDIO R AC IN MAIN VIDEO IN COMPUTER IN COMPUTER OUT RS-232C Control panel Terminal board 1 Air inlet gr...
Page 7 - Bottom side; Remote control
EN – 7 ENGLISH Bottom side 3 2 1 1 Adjustment foot (right and left) 2 Lamp cover 3 Adjustment foot (up and down) Caution:Do not replace the lamp right after using the projector. Thelamp will be very hot. 1 2 3 4 5 6 7 8 9 10 11 EXPAND ENTER MENU COMPUTER POWER VIDEO V C AUTO POSITION STILL MUTE VOLU...
Page 8 - Using the remote control
EN – 8 Battery installation Use two AAA size batteries.1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). • Load the batteries from - spring s...
Page 9 - Installation; Orientation of the projector; Front projection; screen; Screen
´ EN – 9 ENGLISH Installation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector. Front projection To find the approximate distance be-tween the projector and screen:Multiply the width of the screen X 1.8 (min.) , Multiply the width of ...
Page 10 - Basic connections; Projector + AV equipment; Projector + DVD player or HDTV decoder
EN – 10 Basic connections This projector can be connected to equipment such as PC, VCRs, video cameras and DVD players. Important:• Make sure that your equipment is turned off before connection.• Plug in firmly and unplug by holding the plug, not by pulling the AC power cord.• If connected units are...
Page 11 - Projector + Personal computer; Please contact your dealer.
´ EN – 11 ENGLISH AUDIO OUT MONITOR OUTPUT to COMPUTER IN (Mini D-SUB 15P) to AUDIO IN to monitorport to COMPUTER OUT to PC audio output PC audio cable (option) When outputting to both a PC monitor and the projector. RGB cable for PC RGB cable for PC (option) computer OI S-VIDEO VIDEO AUDIO L (MONO)...
Page 12 - Preparing the projector for operation; Getting ready for projection
EN – 12 Adjustment foot screen Preparing the projector for operation Getting ready for projection 1. Connect the power cord provided to the projector.2. Connect the power cord to the wall power outlet.3. Remove the lens cap. Warning:• Do not look directly into the lens when projector is “ON”. • The ...
Page 13 - To operate projector power ON; zoom ring; focus ring
´ EN – 13 ENGLISH To operate projector power ON • When the lamp indicator is blinking red, the the lamp should be replaced. Replace the lamp. Seepages 23 and 26. • The picture might not be of optimum performance in extreme hot or cold conditions. (The projector isnot malfunctioning.) 4. Select the d...
Page 14 - Turning off the projector
EN – 14 30 To operate projector power ON (Continue) Turning off the projector 7. Press the POWER button. The message “POWER OFF? YES : PRESS AGAIN” appears on the screen. • To exit from this mode, press any button except P O W E R , L A S E R , m o u s e p o i n t e r, R / L - c l i ck ,STILL and VO...
Page 15 - Basic operation; Menu operation
EN – 15 ENGLISH Basic operation Several settings can be adjusted using Menu. EXAMPLE: Auto power off time setting 1. Press the MENU button. 2. Press the $ or % button to select the INSTALLA- TION menu. 3. Press the ENTER button (or } button). 4. Press the { or } button to select AUTO POWER OFF. 5. P...
Page 16 - IMAGE; as the number increases.; INSTALLATION; signal selected source. Select 0 min. to cancel this function.; FEATURES
EN – 16 INSTALLATION AUTO POWER ON OFF OFF AUTO POWER OFF OFF Opt XGA60 IMAGE REVERSE MENU POSITION FEATURE VIDEO SIGNAL AUTO LANGUAGE English ALL RESET OK ANAMORPHIC OFF Opt XGA60 A Ë ? EXPAND MODE 1. AUDIO MODE A A 1. 2 1 IMAGE CONTRAST ........ Adjusts the picture contrast. The contrast becomes h...
Page 17 - User memory for signal setting
EN – 17 ENGLISH 4 SIGNAL MEMORY CALL ........ Use to select AUTO, USER 1 or USER 2. See below.HORIZ. POSITION .... Use to adjust the horizontal position of the image.VERT. POSITION ..... Use to adjust the vertical position of the image.FINE SYNC. ....... Use to synchronize the projector with PC inpu...
Page 18 - Picture adjustment; About color temperature; Color temperature
EN – 18 Adjusting the image You can adjust the picture by using the IMAGE menu. To control the level of white-to-black in the image :Adjust CONTRAST in IMAGE menu. Press the % button to increase the contrast and the $ button to reduce it. To control the light level of the image :Adjust BRIGHTNESS in...
Page 19 - Adjustment from personal computer
EN – 19 ENGLISH Adjustment from personal computer Although this projector sets proper signal systemsautomatically for the image signal from personalcomputers, it cannot be applied to some of personalcomputers. In this case, press the AUTO POSITIONbutton. If the images are still not projected correct...
Page 21 - Advanced features for presentation; Expand; • Display enlargement does not work with; EXPAND MODE
EN – 21 ENGLISH Advanced features for presentation Expand By pressing the EXPAND button on the remote con-trol, you can magnify the detailed image of the picture.You can also view the screen displaying the picture asits original size (native resolution display). Setting the Expand mode1. Press the M...
Page 22 - Interval of the lamp replacement; Lamp replacement
EN – 22 The lamp is designed to project the image on the LCDpanels. When the lamp no longer functions, replace itwith a new one. Caution:• Do not remove the lamp immediately after turning off the lamp of the projector, you may get burnedbecause of the high temperature of the lamp. • For lamp replace...
Page 23 - Maintenance; Cleaning the air-filter
EN – 23 ENGLISH Maintenance Caution:Be sure to turn off the projector and unplug the powercord from the wall outlet before you perform any main-tenance on the projector. Cleaning the air-filter Clean the air-filter frequently. If the filter or ventilationgrill become clogged with dirt or dust, the t...
Page 24 - Troubleshooting; CAUSE; POWER indicator blinks between red and green.; • Screen size exceeds screen size specifications.; POSSIBLE SOLUTIONS
EN – 24 Troubleshooting The following offers solutions to some of the common problems you may encounter. We suggest that you consultthis chart before contacting your dealer. CAUSE • The air inlet grill, outlet grill or air filter is clogged with dust or some objects. POWER indicator does not light u...
Page 25 - Indicators; Normal condition; POWER LAMP; Unusual temperature
EN – 25 ENGLISH Indicators The projector has three LED Indicators which shows the working condition of the projector. The following offers solutions to possible problems. If a problem persists, turn the projector off and consult yourdealer. Normal condition Abnormal condition → ← Steady red Steady g...
Page 26 - Specifications; Kensington Lock
EN – 26 Specifications LCD projector LVP-SA51U AC100V ~ 240V, 50 / 60Hz 2.3 A 0.9-inch LCD panel: 3 pieces (for R, G, B) Pixels 800 × 600 = 480,000 pixels Total 1,440,000 pixels Active pixel rate: 99.99 % or more (each panel) 16,770,000 colors F 2.3~2.6 f = 36.0 mm ~ 43.2 mm 150 W UHP (2, 000 Hours)...
Page 27 - Connectors; What’s included in the box
EN – 27 ENGLISH Connectors PC analog RGB inputUse to input video signals (analog RGB) of a personal computer. (Pin assignment of Mini D-SUB 15P jack) PIN NO. SPEC PIN NO. SPEC 1 R(RED)/C R 9 − 2 G(GREEN)/Y 10 GROUND 3 B(BLUE)/C B 11 GROUND 4 GROUND 12 DDC-DATA 5 GROUND 13 HD/CS 6 GROUND 14 VD 7 GROU...
Page 28 - Printed in Japan
