Page 2 - CAUTION; TO REDUCE THE RISK OF ELECTRIC SHOCK,; This apparatus must be grounded.; WARNING
EN – 2 RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intendedto ale...
Page 3 - ENGLISH; Contents; Trademark, Registered trademark
EN – 3 ENGLISH Contents Important safeguards ........................................................................... 4 Overview ............................................................................................... 6 Using the remote control ................................................
Page 4 - Important safeguards; as this can result in a fire or electric shock.
EN – 4 Important safeguards Please read all these instructions regarding your LCDprojector and retain them for future reference. Followall warnings and instructions marked on the LCD pro-jector. 1. Read instructionsAll the safety and operating instructions shouldbe read before the appliance is opera...
Page 5 - Never remove the cabinet.; Place of installation; COMPLIANCE NOTICE OF FCC
EN – 5 ENGLISH WARNING:Unplug immediately if there issomething wrong with your projector. Do not operate if smoke, strange noise or odor comesout of your projector. It might cause fire or electricshock. In this case, unplug immediately and contactyour dealer. Never remove the cabinet. This projector...
Page 6 - Overview; Control panel
EN – 6 Overview 1 2 3 4 5 8 9 10 11 12 6 7 POWER LAMP VOLUME TEMP VIDEO ENTER MUTE MENU SOURCE COMPUTER AUTO POSITION 5 6 9 10 3 1 4 11 12 13 8 7 2 1 2 3 4 5 6 7 8 9 OI S-VIDEO VIDEO AUDIO L (MONO) AUDIO R AC IN MAIN VIDEO IN COMPUTER IN COMPUTER OUT RS-232C USB Control panel Terminal board 1 Air in...
Page 7 - Bottom side; About laser beam; • Pressing the LASER button provided remote control emits
EN – 7 ENGLISH Bottom side 3 2 1 1 Adjustment foot (right and left) 2 Lamp cover 3 Adjustment foot (up and down) Caution: Do not replace the lamp right after using the projector. Thelamp is very hot. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 17 16 POWER MUTE COMPUTER VIDEO MOUSE LASER MENU ENTER R-CLICK A...
Page 8 - Using the remote control
EN – 8 Battery installation Use two AAA size batteries.1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). • Load the batteries from - spring s...
Page 9 - Installation; Orientation of the projector; Front projection; • Refer to the chart for recommended; Rear projection; screen; Screen
´ EN – 9 ENGLISH Installation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector. Front projection To find the approximate distance be-tween the projector and screen:Multiply the width of the screen ✕ 1.8 (min.) , Multiply the width of ...
Page 10 - Basic connections; Projector + AV equipment; Projector + DVD player or HDTV decoder
EN – 10 Basic connections This projector can be connected to equipment such as PC, VCRs, video cameras and DVD players. Important: • Make sure that your equipment is turned off before connection.• Plug in firmly and unplug by holding the plug, not by pulling the AC power cord.• If connected units ar...
Page 11 - For Macintosh; computer; RGB cable for PC; Projector + Personal computer; Please contact your dealer.; For using Macintosh
´ EN – 11 ENGLISH Connection For IBM PC or IBM PC compatibles to monitor port computer PC audio cable (optional) RGB cable for PC RGB cable for PC(optional) to AUDIO IN to PC audio output to PC monitor to COMPUTER IN to COMPUTER OUT When outputting to both a PC monitor and the projector. For Macinto...
Page 12 - Preparing the projector for operation; Getting ready for projection; When the left and right angles are different
EN – 12 Adjustment foot screen Preparing the projector for operation Getting ready for projection 1. Connect the power cord provided to the projector.2. Connect the power cord to the wall power outlet.3. Remove the lens cap. Warning: • Do not look directly into the lens when projector is “ON”. • The...
Page 13 - To operate projector power ON; MUTE button; zoom ring; focus ring
´ EN – 13 ENGLISH To operate projector power ON • When the lamp indicator is blinking red, the the lamp should be replaced. Replace the lamp. Seepages 23 and 26. • The picture might not be of optimum performance in extreme hot or cold conditions. (The projector isnot malfunctioning.) 4. Select the d...
Page 14 - Turning off the projector; AUTO POSITION button
EN – 14 Turning off the projector 7. Press the POWER button. The message “POWER OFF? YES : PRESS AGAIN” appears on the screen. • To exit from this mode, press any button except POWER, LASER, mouse pointer, R/L-click,STILL and VOLUME + and - buttons. 8. Press the POWER button again. The light source ...
Page 15 - Basic operation; Menu operation
EN – 15 ENGLISH Basic operation Several settings can be adjusted using Menu. EXAMPLE: Auto power off time setting 1. Press the MENU button. 2. Press the $ or % button to select the INSTALLA- TION menu. 3. Press the ENTER button (or } button). 4. Press the { or } button to select AUTO POWER OFF. 5. P...
Page 16 - as the number increases.; on. In this case, use the remote control to turn on the lamp.; FEATURES
EN – 16 IMAGE REVERSE INSTALLATION OFF AUTO POWER ON OFF AUTO POWER OFF OFF Opt XGA60 MENU POSITION FEATURE AUDIO MODE 2 ANAMORPHIC OFF LANGUAGE English VIDEO SIGNAL AUTO A Ë ? Opt XGA60 EXPAND MODE 1. A A 1. 1 IMAGE CONTRAST ........ Adjusts the picture contrast. The contrast becomes higher as the ...
Page 17 - User memory for signal setting; Memorizing the setting
EN – 17 ENGLISH 4 SIGNAL MEMORY CALL ........ Use to select AUTO, USER 1 or USER 2. See below.HORIZ. POSITION .... Use to adjust the horizontal position of the image.VERT. POSITION ..... Use to adjust the vertical position of the image.FINE SYNC. ....... Use to synchronize the projector with PC inpu...
Page 18 - Picture adjustment; Color temperature
EN – 18 Adjusting the image You can adjust the picture by using the IMAGE menu. To control the level of white-to-black in the image : Adjust CONTRAST in IMAGE menu. Press the % button to increase the contrast and the $ button to reduce it. To control the light level of the image : Adjust BRIGHTNESS ...
Page 19 - Adjustment from personal computer
EN – 19 ENGLISH Adjustment from personal computer Although this projector sets proper signal systemsautomatically for the image signal from personalcomputers, it cannot be applied to some of personalcomputers. In this case, press the AUTO POSITIONbutton. If the images are still not projected correct...
Page 21 - Advanced features for presentation; Expand; Setting the Expand mode; Still; Using the Expand mode; EXPAND MODE
EN – 21 ENGLISH Advanced features for presentation Expand By pressing the EXPAND button on the remote con-trol, you can magnify the detailed image of the picture.You can also view the screen displaying the picture asits original size (native resolution display). Setting the Expand mode 1. Press the ...
Page 22 - nal which the projector recognizes first will work.; dows; normal mode automatically.; Advanced features for presentation (continued)
EN – 22 Mouse remote control By connecting to personal computer through the USB, PS/2 or ADB port, you can operate your computer with theprojector remote control. Connection Projector + PC through USB connector Operation MAC adaptorfor MOUSE (option) to ADB port D-SUB 9P Mini DIN 4P RS-232C cable D-...
Page 23 - Interval of the lamp replacement; Lamp replacement
EN – 23 ENGLISH The lamp is designed to project the image on the LCDpanels. When the lamp no longer functions, replace itwith a new one. Caution: • Do not remove the lamp immediately after turning off the lamp of the projector, you may get burnedbecause of the high temperature of the lamp. • For lam...
Page 24 - Maintenance; Cleaning the air-filter; For side air outlet grill; Cleaning the lens
EN – 24 Maintenance Caution: Be sure to turn off the projector and unplug the powercord from the wall outlet before you perform any main-tenance on the projector. Cleaning the air-filter Clean the air-filter frequently. If the filter or ventilationgrill become clogged with dirt or dust, the temperat...
Page 25 - Troubleshooting; CAUSE; POWER indicator does not light up.; • Screen size exceeds screen size specifications.; POSSIBLE SOLUTIONS; The image is
EN – 25 ENGLISH Troubleshooting The following offers solutions to some of the common problems you may encounter. We suggest that you consultthis chart before contacting your dealer. CAUSE • The air inlet grill, outlet grill or air filter is clogged with dust or some objects. POWER indicator does not...
Page 26 - Indicators; Normal condition; Unusual temperature
EN – 26 Indicators The projector has three LED Indicators which shows the working condition of the projector. The following offers solutions to possible problems. If a problem persists, turn the projector off and consult yourdealer. Normal condition Abnormal condition Steady red Steady green Steady ...
Page 27 - Specifications; Kensington Lock
EN – 27 ENGLISH Specifications LCD projector LVP-S50U AC100V ~ 240V, 50 / 60Hz 2.3 A 0.9-inch LCD panel: 3 pieces (for R, G, B) Pixels 800 × 600 = 480,000 pixels Total 1,440,000 pixels Active pixel rate: 99.99 % or more (each panel) 16,770,000 colors F 2.3~3.0 f = 36.0 mm ~ 57.6 mm 150 W UHP (2, 000...
Page 28 - Connectors; PC analog RGB input; What’s included in the box
EN – 28 Connectors PC analog RGB input Use to input video signals (analog RGB) of a personal computer. (Pin assignment of Mini D-SUB 15P jack) PIN NO. SPEC PIN NO. SPEC 1 R(RED)/C R 9 — 2 G(GREEN)/Y 10 GROUND 3 B(BLUE)/C B 11 GROUND 4 GROUND 12 DDC-DATA 5 GROUND 13 HD/CS 6 GROUND 14 VD 7 GROUND 15 D...
