Mitsubishi Electric PAC-YG63MCA - Manual
Mitsubishi Electric PAC-YG63MCA – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety Precautions; Warning; WARNING
- Page 3 – • The following parts should be included in your shipment:; Usage; Input
- Page 4 – Example of System Configuration; LAN; (1) Channel 1 temperature or humidity sensor input
- Page 5 – Prepare the following parts to install this device.; Installation
- Page 6 – Note: Two hooks are located on the upper section of the cover.
- Page 7 – Diagram Image (Installed within a Control Panel); * The wiring in the diagram has been simplified.; Wiring Instructions
- Page 8 – Tightening torque for terminal screws: 1 N·m; * Only the M-NET circuitry of this device receives the power from the
- Page 10 – Tightening torque for terminal screws: 1 N·m.
- Page 11 – Initial Settings
- Page 13 – Dip Switch Functions
- Page 15 – Use the following procedure to confirm operation of the system.; System Operation Test
- Page 16 – This product is designed and intended for use in the residential,
Mitsubishi Electric Air Conditioner Network System
AI controller
PAC-YG63MCA
Installation/Instruction Manual
Before using the device, carefully read this installation/instruction manual to ensure proper operation.
Keep this manual for future reference and give it to the technician when the device is reinstalled or repaired.
GB
Table of Contents
Page
1.
Safety Precautions .............................................. 1
2.
Usage .................................................................. 2
3.
Parts List.............................................................. 2
4.
Specifications ...................................................... 2
4-1.
Device Specifications ......................... 2
4-2.
External Dimensions........................... 3
5.
Example of System Configuration ....................... 3
6.
Installation ........................................................... 4
6-1.
Parts Purchased Separately ............... 4
6-2.
Installation Instructions ....................... 5
7.
Wiring Instructions ............................................... 6
7-1.
Terminal Diagram ............................... 6
7-2.
Connecting the Power and M-NET
Transmission Lines............................. 7
7-3.
Connecting the Sensors ..................... 8
(1) Channel 1 Pt100 Input ........................ 8
(2) Channel 1 (Channel 2)
Analog Input ...................................... 8
7-4.
Connecting Alarm Setpoint Outputs ... 9
8.
Initial Settings .................................................... 10
9.
Dip Switch Functions ......................................... 12
10.
LED Display Designations ................................. 13
10-1.
Alarm Setpoint Output and Error
Displays ............................................ 13
10-2.
Sensor and Communication Error
Displays ............................................ 13
11.
System Operation Test ...................................... 14
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 • Thoroughly read the following safety precautions before use.• Hazards that can occur from incorrect handling are classified by the symbols below: • After reading this manual, keep this manual for future reference. When the device is reinstalled or repaired, give this manual to those who provide ...
2 The AI controller measures temperature and humidity; it also has an alarm capability if the measurement data exceeds defined setpoints. Historical measurement data can be displayed via only the G(B)-50A Web browser and TG-2000A. Temperature and humidity cannot be displayed on the G-50A LCD.Further...
3 4-2. External Dimensions [ 24 VDC Power Supply] N623 Al controller PAC-YG63MCA MODEL SERVICE REF. PAC-INPUTWEIGHTSERIAL No. MADE IN JAPAN YG60MCA-J VOLTAGE DC24V;0.2A 0.6 kg / 1 / 3 8 lb Al controller PAC-YG63MCA [ Output LEDs ] Alarm Alarm Ch2 Ch1 [ OUTPUT ] Non-voltage Contact Output Alarm Alarm...
