Mitsubishi Electric LGH-100RX4-E - Manual
Mitsubishi Electric LGH-100RX4-E – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – For connection of a Lossnay remote; Note; System diagram; Operation; AUTOMATIC VENTILATION setting
- Page 3 – English; Removing the parts; Maintenance; C A U T I O N; Do NOT wash in water.
- Page 4 – Specifications; After-sales servicing; Assembly after maintenance
1
English
Names of the parts
Models LGH-15 to 100 RX
4
Models LGH-150 and 200 RX
4
Safety precautions
The following signs indicate that death or serious injury may be caused by a failure to heed the precautions described below and the resultant
mishandling of the product.
WA R N I N G
●
This product must not be disassembled under any circumstances. Only authorized repair technicians are qualified to conduct
disassembly and repairs.
(Failure to heed this warning may result in fire, electrical shock or injury.)
If your product needs to be repaired, consult your dealer.
●
Do not splash water over this product.
(Failure to heed this warning may result in fire and/or electrical shock.)
●
If flammable gases should leak, do not turn the Lossnay’s switch on or off.
(Failure to heed this warning may cause the electrical contacts to generate sparks which may result in an explosion.)
Open windows to ventilate.
●
Do not poke your fingers or sticks into the air intake and outlet while the product is operating.
(Failure to heed this warning may result in injury.)
●
Gloves should be worn when doing the installation and maintenance work.
(Failure to heed this warning may result in injury.)
●
Be sure that the power board circuit breaker is in the OFF position and is securely locked by lock and key before proceeding with
maintenance work.
(Failure to heed this warning may result in electrical shock or injury.)
●
In the event of trouble (smell of burning, etc.), shut down operation, set the power board circuit breaker to its OFF position and
consult your dealer.
(Continued operation without remedying the trouble may result in electrical shock, fire, etc.)
No
disassembly
Prohibited
Instructions
must be
followed
Do not touch
Please read through these instructions in order to familiarize yourself with the proper and safe procedures for operat-
ing the Lossnay.
After reading this manual, keep it in an easily accessible and safe place for future reference.
LGH-15RX
4
-E,
LGH-25RX
4
-E,
LGH-35RX
4
-E
LGH-50RX
4
-E,
LGH-65RX
4
-E,
LGH-80RX
4
-E
LGH-100RX
4
-E,
LGH-150RX
4
-E,
LGH-200RX
4
-E
Lossnay
Models:
Operating Instructions
(For the user)
2
Control box
3
Lossnay core holder
7
Air filter
5
Lossnay core
4
Air supply fan
1
Maintenance cover
8
Damper plate
6
Air exhaust fan
3
Lossnay core holder
7
Air filter
5
Lossnay core
1
Maintenance cover
2
Control box
4
Air supply fan
8
Damper plate
6
Air exhaust fan
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 1. For connection of a remote controller (PZ-41SLB-E) If the Lossnay’s operation is linked with the operation of an external device such as an air conditioner, the method of use will differ, so carry outthe appropriate operation in accordance with the following table. Also, please see the installa...
3 English Remove all dust and dirt on air filters and Lossnay core(s) at regularintervals in order to prevent a deterioration in the Lossnay functions.Guideline: Clean the air filters once a year.Clean the Lossnay core(s) once two year. Removing the parts 1) Maintenance cover Locate and remove the c...
4 Specifications * The values given in the table for the noise level reflect the levels measured at a position 1.5 meters immediately below the unit in an anechoicchamber. * The noise at the air outlets is the values at a 45° angle, 1.5 meters in front of the unit. * The above values apply during Lo...
