Page 2 - RISK OF ELECTRIC SHOCK; CAUTION; : TO REDUCE THE RISK OF ELECTRIC; WARNING; This apparatus must be grounded.; CAUTION
EN-2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning fl ash with arrowhead symbol within an equilateral triangle is intended to alert...
Page 3 - ENGLISH; Contents; Declaration of Conformity; MITSUBISHI ELECTRIC; Trademark, Registered trademark
EN-3 ENGLISH Contents Declaration of Conformity Model number : HC910 Trade name : MITSUBISHI ELECTRIC Responsible party : Mitsubishi Digital Electronics America, Inc. 9351 Jeronimo Road, Irvine, CA 92618 U.S.A Telephone number : +1-(949) 465-6000 This device complies with Part 15 of the FCC Rules. O...
Page 4 - Important safeguards
EN-4 Important safeguards Please read all these instructions regarding your projector and retain them for future reference. Follow all warnings and instructions marked on the projector. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated. 2....
Page 6 - Preparing your projector; Cables; Power cord; Others; • Lens cap (Attached to the; Filter parts; Cap; Checking accessories; Inserting the batteries into the remote control; control is slow to operate.
EN-6 Preparing your projector Cables Power supply parts Remote control parts Power cord (two) (246C483-10, 246C383-20) Remote control (290P133-10) R03 (Size-AAA) battery (two) RS-232C cable (246C508-10) RGB cable for PC (246C521-10) Others • Lens cap (Attached to the projector) • User manual (Englis...
Page 7 - Overview; Control area; • While the menu is on the screen for the keystone adjust-; Terminal panel
EN-7 ENGLISH Overview 3 2 1 5 7 10 9 8 6 4 2 1 3 4 8 5 6 7 9 1 FOCUS ring 2 ZOOM ring 3 Control panel 4 Air outlet grille 5 Remote control sensor (Front)6 Air inlet grille 7 Air outlet grille 8 Terminal board 9 Kensington Security Lock Standard connector10 Air inlet grille Control area 1 POWER butto...
Page 8 - Bottom side; Remote control; Using the picture quality adjusting buttons; and
EN-8 ON DVI PC COMP CONTRAST ASPECT CNT M1 AV MEMORY BRIGHTNESS BRT M2 COLOR TEMP C.T. GAMMA SHARPNESS SHARP IRIS AUTO POSITION A.P. M3 VIDEO S-VIDEO POWER OFF COMPUTER DVI-D (HDCP) COMPONENT ENTER MENU 1 2 34 5 6 7 8 9 18 19 17 16 15 14 1312 1110 1 2 3 Preparating your projector (Continue) Bottom s...
Page 9 - Using the remote control; Operational range of the remote control; • Keep the remote control photo-sensor out of direct; Reception angle; Vertical directions
EN-9 ENGLISH Using the remote control 30˚ 30˚ 30˚ 30˚ 20° 10° 20° 10° 20˚ 20˚ Operational range of the remote control • Keep the remote control photo-sensor out of direct sunlight or fl uorescent lamp light. • Keep the remote control photo-sensor at least 2 m away from fl uorescent lamps. Otherwise, t...
Page 10 - Setting up your projector; Setting up the screen; Adjustment of the projection angle
EN-10 Setting up your projector W A A=B B Setting up the screen Install the screen perpendicularly to the projector. If the screen can not be installed in such a way, adjust the projection angle of the projector. (See below.)• Install the screen and projector so that the projector’s lens is placed a...
Page 11 - Screen size and projection distance; Refer to the following table to determine the screen size.; When the aspect ratio of the screen is 16:9; When the aspect ratio of the screen is 4:3
EN-11 ENGLISH Screen size and projection distance Refer to the following table to determine the screen size. B A Hd 40 102 20 50 35 89 55 1.4 67 1.7 6.4 16.2 60 152 29 75 52 133 84 2.1 102 2.6 9.6 24.3 80 203 39 100 70 177 113 2.9 137 3.5 12.7 32.4 100 254 49 125 87 221 142 3.6 171 4.4 15.9 40.5 150...
Page 12 - Viewing video images; A. Connecting the projector to video equipment; Basic home theater system connection
EN-12 Viewing video images A. Connecting the projector to video equipment Preparation: • Make sure that the power of the projector and that of the video equipment are turned off. Basic home theater system connection VIDEO IN COMPONENT VIDEO IN C B /P B Y C R /P R S-VIDEO IN Video player DVD player S...
Page 13 - Connecting to a DVD player
EN-13 ENGLISH COMPONENT VIDEO IN P B /C B Y P R /C R P B /C B Y P R /C R S-VIDEO IN VIDEO IN 1 2 S-VIDEO IN COMPONENT VIDEO IN VIDEO IN COMPONENT VIDEO IN 1 2 VIDEO IN S-VIDEO IN Connecting to a video player, etc. 1. Connect one end of the optional video cable to the VIDEO IN terminal of the project...
Page 14 - Connecting to video equipment having a DVI-D terminal; B. Plugging in the power cord
EN-14 Viewing video images (continued) Connecting to video equipment having a DVI-D terminal You can project high-quality images by connecting the DVI-D terminal of this projector to video equipment having a DVI-D output terminal. In addition, this projector supports HDCP and is able to receive encr...
Page 15 - Confi rm the POWER indicator lights up red.
EN-15 ENGLISH C. Projecting images Preparation: • Remove the lens cap.• Turn on the power of the connected video equipment. 1. Confi rm the POWER indicator lights up red. • If the projector was turned off before the lamp was cooled down suffi ciently last time, the fan may start rotating and the POWER...
Page 16 - When projected images are distorted to a trapezoid:; With the control area of the projector:; IRIS button
EN-16 Viewing video images (continued) To stop projecting: 8. Press the POWER button on the projector or the OFF ( ) button on the remote control. • A confi rmation message is displayed. • To cancel the procedure, leave the projector for a while or press the MENU button. 9. Press the POWER button on ...
Page 17 - Setting the aspect ratio; With the remote control:; Select ASPECT by pressing the
EN-17 ENGLISH Setting the aspect ratio You can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the setting according to the type of the input video signal. How to change the settings: With the remote control: 1. Press the ASPECT button. • Ever...
Page 18 - Viewing computer images; A. Connecting the projector to a computer; For analog connection:; B. Plugging the power cord
EN-18 COMPONENT VIDEO IN 2 1 VIDEO IN S-VIDEO IN COMPONENT VIDEO IN 2 1 S-VIDEO IN VIDEO IN Viewing computer images A. Connecting the projector to a computer Preparation: • Make sure that the power of the projector and that of the computer are turned off. • When connecting the projector to a desktop...
Page 20 - Example of the setting procedure for external output
EN-20 AUTO POSITION button When the image supplied from the computer is displaced, carry out the following procedure. 1. Display a bright image (such as a full-screen display of the Recycle Bin window). 2. When the screen saver has been enabled, disable it. 3. Press the AUTO POSITION button. The pro...
Page 21 - Menu operation; How to set the menus:
EN-21 ENGLISH Menu operation • Menus are not displayed when no signal is supplied to the projector. * 1: Not available with certain signals.* 2: Available only when the input signal is TV50, TV60, 480i, or 576i.* 3: Available only when the source is VIDEO or S-VIDEO.* 4: Setting range differs depend...
Page 22 - Available settings in the menus
EN-22 CONTRAST IMAGE 0 BRIGHTNESS 0 6500K 0 COLOR AUTO 0 SVGA60 AUTO TINT 0 SHARPNESS COLOR TEMP. GAMMA MODE WHITE ENHANCE opt. AV MEMORY 1 IMAGEREVERSE OFF AUTO POWER ON OFF AUTO POWER OFF KEYSTONE ON INSTALLATION ON BACK COLOR OFF BLUE SVGA60 SPLASHSCREEN 0 opt. STANDARD LAMP MODE AV MEMORY 1 FEAT...
Page 24 - Adjusting projected images; CONTRAST
EN-24 Adjusting projected images To adjust the brightness (CONTRAST and BRIGHTNESS): You can make adjustments for the brightness of the projected image using the menu. (See Page 21 for menu setting.) 1. Display the IMAGE menu. 2. Select CONTRAST or BRIGHTNESS by pressing the or button. 3. Adjust the...
Page 25 - To adjust the tone of white (To customize the color temperature):; To enable the stored color temperature:; About color temperature; To store the settings
EN-25 ENGLISH To adjust the tone of white (COLOR TEMP.): You can select a preset color temperature (white tone) using the menu. (See Page 21 for menu setting.) 1. Display the IMAGE menu. 2. Select COLOR TEMP. by pressing the or button. 3. Select your desired color temperature by pressing the or butt...
Page 26 - How to adjust the image supplied from the computer using the menu:; Simple method to adjust the image position
EN-26 This projector automatically and properly projects video signals supplied from the computer. However, some video signals may not be projected, depending on the type of the computer. In such a case, press the AUTO POSITION button. (See Page 20.) When the signal is still not projected properly, ...
Page 27 - Password function; To enable the password function:; Advanced features
EN-27 ENGLISH MENU ACCESS SVGA60 opt. LOCK UNLOCK OK OK AV MEMORY 1 PASSWORD CONFIRM O K CANCEL MENU ACCESS SVGA60 opt. LOCK UNLOCK OK OK AV MEMORY 1 PASSWORD O K CANCEL Password function This projector is equipped with the password function that is designed for prevention of wrong operation by chil...
Page 28 - Asking for installation
EN-28 61 245 310 100 5 COMPONENT VIDEO IN S-VIDEO IN VIDEO IN Asking for installation To view images projected by the ceiling-mounted projector from the front: When the projector is installed on the ceiling, the special ceiling mount bracket, which is separately sold, is required. Be sure to ask a c...
Page 29 - Using fi lter; Installation; Cleaning the fi lter
EN-29 ENGLISH Using fi lter Filter cover (a) (a) Holder Holder Filter cover Filter Filter cover (a) This projector has a fi lter cover (fi lter) for keeping dust out. When using the projector in a dusty place, attach this fi lter cover. Installation Before installing this fi lter to the projector, be s...
Page 30 - Replacing the lamp; Interval of lamp replacement
EN-30 Replacing the lamp This projector is equipped with a lamp to project images. This lamp is a consumable. It may burn out or its brightness may decrease during use. In such cases, replace the lamp with a new one as soon as possible. Be sure to replace the lamp with a new lamp separately sold tha...
Page 31 - To replace the lamp:; Reset of the lamp operation time; Maintenance; Cleaning of the projector and the ventilation slots
EN-31 ENGLISH (c) (a) (b) (c) To replace the lamp: 1. Reverse the projector gently. 2. Loosen the screw (a) using a Phillips screwdriver (+), and remove the lamp cover (b). 3. Loosen the screws (c) using a Phillips screwdriver (+). 4. Pull up the handle. 5. Pull out the lamp box by the handle while ...
Page 32 - Troubleshooting; No image appears on the screen.; out the following procedure.
EN-32 POWER Off Steady red Blinking red / green STATUS Off Off Blinking orange Blinking green Steady red Off Steady or Blinking Solution • Connect the power cord to the projector. • Plug the power cord into a wall outlet. • If any objects are blocking the air inlet or outlet grille, remove them and ...
Page 33 - Problem
EN-33 ENGLISH Images are not displayed correctly. Problem Projected images are shaking.Projected images are displaced. Projected images are distorted. Projected images are dark. Projected images are blurred. White dots are seen on projected images. Black dots are seen on projected images. Rainbow ef...
Page 34 - temperature stays high, the lamp goes out.; Kensington Lock
EN-34 Others Problem The exhaust vents emit warm air. The menu can't be used. “TEMPERATURE!!” is displayed. The mark appears. The remote control doesn't function easily or at all. The buttons on the control panel (except for the POWER button) don’t function. Abnormal sound is heard. Solution • This ...
Page 35 - Indicators; Normal condition
EN-35 ENGLISH Indicators POWER Steady green or Steady red Steady red Steady green Steady red Steady red Blinking green/red Blinking green/red STATUS Blinking orange Blinking green Blinking green/red Blinking red Steady red Off Steady or Blinking CONDITION Abnormal temperature • The ventilation grill...
Page 36 - Specifi cations
EN-36 Specifi cations The specifi cations and outside appearance of the projector are subject to change without prior notice. Type Model Display Technology Projection lens Light-source lamp Image size (Projection distance)Maximum number of display colorsMaximum resolution Computer signal Video signal...
Page 37 - • If the resolution and frequency of your computer; Connectors
EN-37 ENGLISH TV60, 480i(525i) - 15.73 59.94 1024 x 576 - TV50, 576i(625i) - 15.63 50.00 1024 x 576 - 1080i 60 (1125i 60) - 33.75 60.00 1024 x 576 - *2 1080i 50 (1125i 50) - 28.13 50.00 1024 x 576 - 480p (525p) - 31.47 59.94 1024 x 576 - *2 576p (625p) - 31.25 50.00 1024 x 576 - *2 720p 60 (750p 60)...
Page 38 - MITSUBISHI Projector Contact Information; Manufactured by Mitsubishi Electric Corporation; MITSUBISHI ELECTRIC CORPORATION; Printed in Japan
MITSUBISHI Projector Contact Information Manufactured by Mitsubishi Electric Corporation 1 Zusho Baba, Nagaokakyo-City, Kyoto Japan MITSUBISHI ELECTRIC CORPORATION North America MESCA (Mitsubishi Electric Sales Canada Inc.)http://www.mitsubishielectric.caInformation Technologies Group, 4299 14th Ave...
