Mitsubishi Electric FX-485ADP - Manual
Mitsubishi Electric FX-485ADP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INTRODUCTION; FX; The adapter for FX-485ADP RS485 or the adapter for FX; External dimensions
- Page 3 – System configuration
- Page 4 – WIRING; Connection with PC
- Page 5 – (1) When connecting one computer and one PC; Cable connection and signal direction
- Page 6 – (1) When connecting one computer and one PC
- Page 7 – prevent a loose connection from causing a malfunction.; Terminating resistances
- Page 8 – SPECIFICATIONS; Performance specification
- Page 9 – COMMAND AND DEVICE RANGE; Computer commands
- Page 10 – DIAGNOSTICS; tioning correctly. Check and connect correctly.
- Page 11 – START UP PROCEDURE
- Page 12 – If in doubt at any stage during the installation of the FX-485ADP, FX; Manual number
U S E R ' S G U I D E
JY992D53201C
This manual contains text, diagrams and explanations which will guide the reader in the correct installation and
operation of the FX and FX
0N
, 485 communication adapters. It should be read and understood before attempt-
ing to install or use these units.
Further information can be found in the FX PROGRAMMING MANUAL, FX and FX0/FX
0N
series hardware
manuals.
When the FX
0N
-485ADP is used with the FX
2N
series programmable contoller, please see the FX
2N
-485-BD
USER'S GUIDE for operation.
FX-485ADP COMMUNICATION ADAPTER
FX
0N
-485ADP COMMUNICATION ADAPTER
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 INTRODUCTION ① ⑥ LINK SG SDB SDA RDB RDA FG 24+ 24G 〈 FX-485ADP 〉 MITSUBISHI FX-485ADP ① Direct mounting hole ② Power LED ··· ③ RD LED · · · · · · · ④ SD LED · · · · · · · ⑤ Terminal screws (M3 (0.12)) ⑥ Extension cable ⑦ Terminal cover ⑧ Groove for mounting DIN rail (DIN rail width : 35 (1.38)) ⑨...
Station No.15 ↑ , , , , , , , , , , , , , , , , , , , , , , , , FX series PC Max. 16 stations including A series PCs (total extension distance 500m) (2) Computer and PC by 1 : n configuration In this case, the number of link stations is 16 PCs at maximum for one computer, including the FX seriesPCs ...
For setting up the system, the 485ADP can be connected to the following PCs. PC series FX 0N FX , FX 2C PC version Ver. 1.20 or later Ver. 3.30 or later Remarks Exclusive protocol format 1 and format 4 are supported. Exclusive protocol format 1 and format 4 are supported. FX 0N -485ADP FX-485ADP As ...
