Page 2 - RISK OF ELECTRIC SHOCK; CAUTION; : TO REDUCE THE RISK OF ELECTRIC; WARNING; This apparatus must be grounded.; CAUTION
EN-2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning fl ash with arrowhead symbol within an equilateral triangle is intended to alert...
Page 3 - Contents; Please, help us to conserve the environment we live in!; Trademark, Registered trademark; and other countries and areas.; Declaration of Conformity; MITSUBISHI ELECTRIC
EN-3 Contents Important safeguards ........................................................................................................................ 4 Preparing your projector .................................................................................................................... ...
Page 4 - Important safeguards
EN-4 Important safeguards Please read all these instructions regarding your projector and retain them for future reference. Follow all warnings and instructions marked on the projector. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated. 2....
Page 6 - Preparing your projector; Checking accessories; Inserting the batteries into the remote control; control is slow to operate.; Cables; Remote control; Others; • Lens cap (attached; Power supply parts
EN-6 Preparing your projector 1 2 3 Checking accessories The following accessories are provided with this projector. Check to be sure that all of the accessories are packed in the package. Important: • The attached power cords are to be used exclusively for this product. Never use them for other pro...
Page 7 - Overview; Control area; • The AUDIO IN 1 terminal is used for both COMPUTER 1; Terminal board
EN-7 Overview 1 2 8 4 5 9 10 6 7 3 8 7 10 9 11 1 3 4 6 5 2 1 Remote control sensor (Front)2 Lens3 Control area 4 Easy-carry handle 5 Air inlet grille 6 Terminal board 7 Air outlet grille Control area 1 POWER button 2 AUTO POSITION/ S button 3 COMPUTER/ W button 4 VOLUME/ T button 5 MENU button 6 ZOO...
Page 8 - Bottom side; • Pressing the LASER button emits a laser beam.; About the laser beam
EN-8 1 2 3 Preparating your projector (continued) Bottom side 1 Adjustment feet 2 Air inlet grille/Filter cover3 Lamp cover Caution: Do not replace the lamp immediately after using the projector because the lamp would be extremely hot and it may cause burns. 29 COMPUTER VIDEO S-VIDEO DVI-D(HDCP) HOM...
Page 9 - Using the remote control; Operational range of the remote control; Reception angle; Vertical directions; Using the wired remote control
EN-9 Using the remote control 30° 30° 30° 30° 20° 10° 20° 10° 20° 20° Operational range of the remote control • Keep the remote control photo-sensor out of direct sunlight or fl uorescent lamp light. • Keep the remote control photo-sensor at least 2 m (6 feet) away from fl uorescent lamps. Otherwise, ...
Page 10 - Setting up your projector; Setting up the screen; makes the projected images whitish and hard to view.; Screen size and projection distance; distance range for your screen size.; When the aspect ratio of the screen is 16:9; When the aspect ratio of the screen is 4:3; When the aspect ratio of the image is 16:9; Front projection
EN-10 Setting up your projector Setting up the screen Install the screen perpendicularly to the projector. If the screen can not be installed in such a way, adjust the projection angle of the projector. (See page 11.)• Install the screen and projector so that the projector’s lens is placed at the sa...
Page 11 - After using the projector:; When fi ne streaks are seen on projected images
EN-11 Setting up your projector (continued) LENS SHIFT button To adjust the positions of the projector and the screen, use LENS SHIFT button. 1. Press the LENS SHIFT button. • The LENS SHIFT menu appears at the center of the screen. 2. Press the S , T , W or X button to move the image position. • Wh...
Page 13 - Viewing computer images; A. Connecting the projector to a computer; For analog connection:; • This projector uses stereo pin jack for its audio input. Check
EN-13 Viewing computer images 2 1 AUDIO OUT AUDIO IN 1/2 2 1 2 1 A. Connecting the projector to a computer Preparation: • Make sure that the power of the projector and that of the computer are turned off. • When connecting the projector to a desktop computer, disconnect the RGB cable that is connect...
Page 14 - About DDC; For monitor connection:; • When the audio cable is connected to the AUDIO OUT ter-; B. Plugging the power cord
EN-14 Viewing computer images (continued) 2 1 1. Plug the attached power cord into the power cord inlet of this projector. 2. Plug the other end of the power cord into a power outlet. • The power cords for use in the U.S. and Europe are included with this projector. Use the appropriate one for your ...
Page 15 - • Remove the lens cap.
EN-15 Viewing computer images (continued) C. Projecting images Preparation: • Remove the lens cap. 1. Put the projector into standby mode by pressing the main power switch. The POWER indicator lights up red. • If the projector was turned off before the lamp was cooled down suffi ciently last time, th...
Page 16 - Example of the setting procedure for external output
EN-16 Viewing computer images (continued) Important: • Focus, zoom and lens shift adjustment is possible in the normal picture mode only.• When a 4:3 image is kept displayed for a long time before displaying 16:9 image, the afterimages of the black bars may appear on the 16:9 image screen. (See page...
Page 17 - Viewing video images; When using the BNC connector:; A. Connecting the projector to video equipment
EN-17 Viewing video images Connecting to a video player, etc. 1. Connect one end (yellow) of the supplied audio/video cable to the VIDEO IN terminal of the projector. 2. Connect one end (white and red) of the supplied audio/ video cable to the audio input terminals (L/MONO, R) of the projector. 3. C...
Page 18 - Connection (for video equipment having an HDMI terminal); Projector + DVD player or HDTV decoder
EN-18 Connecting to video equipment having a HDMI terminal or DVI-D terminal You can project high-quality images by connecting the COMPUTER/COMPONENT VIDEO DVI-D (HDCP) terminal of this projector to video equipment having a HDMI output terminal or DVI-D terminal. In addition, this projector supports...
Page 19 - B. Plugging in the power cord
EN-19 Equipment having a DVI-D terminal To audio output terminals Audio cable (option) To audio input terminals To DVI-D terminal DVI cable (option) COMPUTER/COMPONENT VIDEO DVI-D (HDCP) Connection (for video equipment having a DVI-D terminal) • For connection to the DVI-D terminal, use a commercial...
Page 21 - How to change the settings:
EN-21 Important: • Focus, zoom and lens shift adjustment is possible in the normal picture mode only. To stop projecting: 13. Press the POWER button. • A confi rmation message is displayed. • To cancel the procedure, leave the projector for a while or press any button except the POWER button. 14. Pre...
Page 22 - Menu operation
EN-22 Menu operation • Menus are not displayed when no signal is supplied to the projector. * 1: Not available when COLOR ENHANCER is set to sRGB.* 2: Not available with certain signals.* 3: Not available when the input signal is from the VIDEO IN or S-VIDEO IN terminal.* 4: Available only when the ...
Page 23 - Available settings in the menus; IMAGE - ADVANCED menu; How to set the menus:
EN-23 Available settings in the menus Set the following items on their relevant menus. 1. IMAGE menu IMAGE - ADVANCED menu ITEM SETTING FUNCTION COLOR ENHANCER AUTO Select to optimize the settings automatically depending on the input signal. (Select this option for normal use.) PRESENTATION Select t...
Page 28 - Adjusting projected images; CONTRAST
EN-28 Adjusting projected images To adjust the brightness (CONTRAST and BRIGHTNESS): You can make adjustments for the brightness of the projected image using the menu. (See page 23 for menu setting.) 1. Display the IMAGE menu. 2. Select CONTRAST or BRIGHTNESS by pressing the S or T button. 3. Adjust...
Page 29 - About color temperature; Color Enhancer; GAMMA mode
EN-29 To adjust the tone of white (COLOR TEMP.): You can select a preset color temperature (white tone) using the menu. (See page 23 for menu setting.) 1. Display the IMAGE menu. 2. Select COLOR TEMP. by pressing the S or T button. 3. Select your desired color temperature by pressing the W or X butt...
Page 30 - How to adjust the computer image
EN-30 Adjusting projected images (continued) How to adjust the computer image This projector automatically selects a proper signal format according to the type of video signal supplied from the computer. However, video signals from the computer may not be projected correctly depending on the types o...
Page 31 - To adjust the horizontal position:
EN-31 How to adjust the image supplied from the computer using the menu: Carry out the following procedures according to the symptoms. Wide strips appear. ……………………………………… Adjust TRACKING in the SIGNAL menu. The projected image fl ickers. The projected image is blurred. ..................................
Page 32 - Setting procedure; Advanced features
EN-32 Set the background color (Set the background color only when you set the im-age size to x1 or x4.)6. Select BACK COLOR by pressing the S or T but- ton. 7. Select your desired color for the background (GRAY, RED, GREEN, BLUE, BLACK, WHITE, RED50%, GREEN50%, or BLUE50%) by pressing the W or X bu...
Page 33 - Password function; To enable the password function:
EN-33 MENU ACCESS FEATURE opt. LOCK UNLOCK OK OK PASSWORD CONFIRM 1 3 2 4 O K : ENTER CANCEL : MENU MENU ACCESS FEATURE opt. LOCK UNLOCK OK OK PASSWORD 1 3 2 4 O K : ENTER CANCEL : MENU Password function This projector is equipped with the password function that is designed for prevention of wrong o...
Page 34 - Split; To use the split mode:; To change the input source of the left or right screen:; Freeze; To resume the motion in the image:
EN-34 Split You can split the screen in two and display a computer image on the left screen and a video image on the right screen. To use the split mode: Left screen Right screen 1. Press the SPLIT button on the remote control. • The screen is split in two and the left and right screens display the ...
Page 35 - Mouse remote control; Projector + computer with USB connector; restart the computer.; USB; USB cable; HOME button
EN-35 Mouse remote control By connecting to personal computer through the USB port, you can operate your computer with the projector remote control. Projector + computer with USB connector Operation • You can use the mouse remote control function with a computer supporting USB only. • When the lamp ...
Page 36 - Supervising and controlling by computer; Major functions; ProjectorView; About PJLinkTM; Connection
EN-36 Supervising and controlling by computer You can supervise and control the projector’s operation using a personal computer via a LAN network. • To supervise and control the projector, install the software “Projector-Control Device Installer *” contained in the attached CD-ROM. For the installat...
Page 37 - Indicators; Normal condition; STATUS indicator
EN-37 Indicators POWER Steady green or Steady red Steady red Steady green Steady red Steady red Blinking green/red Blinking green/red STATUS Blinking orange Blinking green Blinking green/red Blinking red Steady red Off Steady or Blinking CONDITION Abnormal temperature• The ventilation grilles are cl...
Page 38 - Inserting the batteries into the theft warning device; Installing the terminal cover; Procedure for changing batteries; How to check battery level
EN-38 This projector includes a terminal cover with Anti-Theft Alarm device. Once the terminal cover is installed, its Anti-Theft Alarm device will detect vibration caused by the projector being moved and emit an alarm. • Mitsubishi assumes no responsibility or liability for theft or other damages. ...
Page 39 - Replacing the lamp; Interval of lamp replacement; When the lamp operation time exceeds 4000
EN-39 Replacing the lamp This projector is equipped with a lamp to project images. This lamp is a consumable. It may burn out or its brightness may decrease during use. In such cases, replace the lamp with a new one as soon as possible. Be sure to replace the lamp with a new lamp separately sold tha...
Page 40 - To replace the lamp:; Reset of the lamp operation time
EN-40 (a) (b) (c) (c) Replacing the lamp (continued) To replace the lamp: 1. Turn off the main power switch and unplug the power cord. 2. Reverse the projector gently. 3. Loosen the screw (a) using a Phillips screwdriver (+), and remove the lamp cover (b). 4. Loosen the screws (c) using a Phillips s...
Page 41 - Maintenance; Cleaning of the air-fi lter
EN-41 Maintenance Warning: • Never use fl ammable air duster or other materials when cleaning the air-fi lter. Flammable substances may ignite causing fi re or backdown when the lamp is illuminated. • Do not use fl ammable solvents (benzene, thinner, etc.) and fl ammable aerosols when cleaning the projec...
Page 42 - Troubleshooting; No image appears on the screen.; out the following procedure.
EN-42 Troubleshooting Before asking for repair of the projector, check the following. If the symptom persists, stop using the projector, be sure to unplug the power plug, and then contact your dealer. No image appears on the screen. Problem Solution Power can not be turned on. • Check whether the in...
Page 44 - Kensington Lock
EN-44 Troubleshooting (continued) Images are not displayed correctly. (continued) Problem Solution Projected images are obscured. • Match the output resolution of your computer with the resolution of the projector. For the method to change the output resolution of the computer, contact the manufactu...
Page 45 - Specifi cations
EN-45 Specifi cations The specifi cations and outside appearance of the projector are subject to change without prior notice. Type LCD projector Model FL7000U Display technology 1.1-inch LCD panel: 3 pieces (for R,G,B)Pixel: 1920 x 1080 = 2073600 pixels Total 6220800 pixels Active pixel rate: 99.99% ...
Page 47 - Connectors; • This projector doesn’t support 480p signals from video; Without terminal cover
EN-47 1 R(RED)/P R /C R 2 G(GREEN)/Y 3 B(BLUE)/P B /C B 4 GND 5 GND 6 GND 7 GND 8 GND 9 DDC 5V 10 GND 11 GND 12 DDC Data 13 HD/CS 14 VD 15 DDC Clock 1 - - 2 TXD IN 3 RXD OUT 4 - - 5 GND - 6 - - 7 - - 8 - - 9 - - 1 5 11 6 10 15 SERIAL (D-SUB 9-pin) Pin No. Name I/O COMPUTER/COMPONENT VIDEO IN 2(Mini ...
Page 48 - MITSUBISHI Projector Contact Information; MITSUBISHI ELECTRIC CORPORATION
MITSUBISHI Projector Contact Information 1 Zusho Baba, Nagaokakyo-City, Kyoto Japan MITSUBISHI ELECTRIC CORPORATION North America MESCA (Mitsubishi Electric Sales Canada Inc.)http://www.mitsubishielectric.caInformation Technologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2, CanadaSales &...
