Page 2 - WARNING; This apparatus must be grounded.; CAUTION; RISK OF ELECTRIC SHOCK; TO REDUCE THE RISK OF ELECTRIC
EN - 2 The lightning fl ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of suffi cient magnitude to constitute a risk of electric shock. The exclamation point wi...
Page 3 - ENGLISH; Contents; Trademark, Registered trademark; MITSUBISHI ELECTRIC
EN - 3 ENGLISH Contents Trademark, Registered trademark Macintosh is registered trademark of Apple Computer Inc.DLP™, Digital Micromirror Device and DMD are all trademarks of Texas Instruments.Other brand or product names are trademarks or registered trademarks of their respective holders. Declarati...
Page 4 - Important safeguards; All operating instructions must be followed.
EN - 4 Important safeguards Please read all these instructions regarding your projec-tor and retain them for future reference. Follow all warn-ings and instructions marked on the projector. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated...
Page 5 - COMPLIANCE NOTICE OF FCC
EN - 5 ENGLISH WARNING: Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It may cause fi re or electric shock. In this case, unplug immediately and contact your dealer. Never remove the cabinet. This projec...
Page 6 - Overview; Control panel; • While the menu or the screen for the keystone ad-; Terminal board; POWER
EN - 6 Overview 1 2 3 4 5 8 7 6 6 9 1011 12 13 1 FOCUS ring 2 ZOOM ring 3 Control panel 4 Air outlet grille 5 Remote control sensor (Front)6 Air inlet grille 7 Air outlet grille 8 Terminal board 9 Kensington Security Lock Standard connector10 Air inlet grille Control panel 1 Power button 2 AUTO POSI...
Page 7 - Bottom side
EN - 7 ENGLISH Bottom side 3 2 1 1 Adjustment foot (Front) 2 Lamp cover 3 Adjustment feet (Rear) Caution: Do not replace the lamp immediately after using the pro-jector because the lamp would be extremely hot and it may cause burns. Remote control 1 ON button 2 STILL button 3 AUTO POSITION button4 E...
Page 8 - Remote control; Battery installation
EN - 8 Remote control Battery installation Use two AAA size batteries.1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the ar- row. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). • Load the batterie...
Page 9 - Installation; Layout of the projector; Front projection; Rear projection; • Do not apply force to the lens, because the lens; • The
EN - 9 ENGLISH 40 102 32 81 24 61 51 1.3 62 1.6 2.8 7.2 60 152 48 122 36 91 77 2.0 94 2.4 4.3 10.9 80 203 64 163 48 122 103 2.6 125 3.2 5.7 14.5 100 254 80 203 60 152 130 3.3 157 4.0 7.1 18.1 150 381 120 305 90 229 196 5.0 237 6.0 10.7 27.1 200 508 160 406 120 305 262 6.6 316 8.0 14.2 36.2 250 635 2...
Page 10 - Basic connections; fected by their interference.; Projector + AV device; Some DVD players have an output connector for 3-line fi tting (Y, C; • Speaker output is mono.
EN - 10 S-VIDEO IN VIDEO IN AUDIO IN (1/2) VCR, etc. to video output to audio output to S-video output Basic connections This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors. Important: • Make...
Page 11 - For computer with Mini D-SUB; Contact your dealer for further information.; For Macintosh; for further information.; About DDC; wall outlet fi rst, and then boot up the computer.
EN - 11 ENGLISH Projector + Computer For computer with Mini D-SUB Important: • When you use a longer RGB cable instead of the provided cable, the image may not be projected correctly. • Some computers require additional connectors or analog RGB output adapters to be connected with this projector. Co...
Page 12 - Preparation; After using the projector:; Preparation for projection
EN - 12 Preparation 1. Tilt up the project to the appropriate angle. 2. Press the foot adjustment buttons next to the adjust- ment feet (rear), and the adjustment feet will come out. 3. Release the buttons to lock the adjustment feet (rear) to that position. 4. Rotate the adjustment feet (rear) for ...
Page 13 - Basic operation; • When COMPUTER 1 or COMPUTER 2 is chosen
EN - 13 ENGLISH Basic operation • The projector starts warming up when the POWER button is pressed. During the warm-up process, images may appear dark and no commands are ac-cepted. • By blinking red, the STATUS indicator indicates that the lamp should be replaced soon. Replace the lamp when the STA...
Page 14 - Volume from the speaker; Press the VOLUME + or; AV mute
EN - 14 VOLUME 10 Volume from the speaker Press the VOLUME + or - button to change the volume from the speaker.The volume control bar will appear on the screen. • The volume control bar will disappear about 10 sec- onds after the VOLUME button is released. • The VOLUME buttons don ' t function while...
Page 15 - Menu operation
EN - 15 ENGLISH Menu operation IMAGE XGA60 opt. INSTALLATION opt. XGA60 INSTALLATION opt. AUTO POWER ON AUTO POWER OFF OFF OFF XGA60 AUTO POWER ON AUTO POWER OFF OFF OFF AUTO POWER ON AUTO POWER OFF 30 min OFF Basic operation Several settings can be adjusted using the menu. Example : Auto power off ...
Page 16 - IMAGE; • When sRGB is ON, CineRichColor, COLOR; INSTALLATION
EN - 16 Menu operation (continued) INSTALLATION opt. ON BACK COLOR AUTO POWER ON AUTO POWER OFF SPLASH SCREEN LAMP MODE ON BLUE OFF OFF STANDARD OFF IMAGE REVERSE XGA60 CONTRAST IMAGE 0 BRIGHTNESS 0 STANDARD 0 COLOR AUTO 0 XGA60 CineRichColor AUTO OFF TINT 0 SHARPNESS COLOR TEMP. GAMMA MODE sRGB opt...
Page 17 - t displayed correctly,; SIGNAL
EN - 17 ENGLISH 3 FEATURE MENU POSITION ................... Use to select the position of the menu on the screen, 1. (upper left) or 2. (lower right). CINEMA MODE ...................... When AUTO is selected, the fi lm mode will be automatically activated when a fi lm source signal is inputted. When O...
Page 18 - Image adjustment; Color temperature; To control the light level of the image :; To determine the intensity of the color :; Adjust COLOR in the IMAGE menu. Press the; To adjust the detail and clarity of the image :
EN - 18 Image adjustment CONTRAST R USER 0 CONTRAST B 0 BRIGHTNESS R 0 BRIGHTNESS B 0 CONTRAST IMAGE 0 BRIGHTNESS 0 STANDARD 0 COLOR AUTO 0 XGA60 CineRichColor AUTO OFF TINT 0 SHARPNESS COLOR TEMP. GAMMA MODE sRGB opt. Color temperature 1. Select COLOR TEMP. in the IMAGE menu. 2. Press the or button...
Page 19 - Adjustment of the image from the computer; To move the image horizontally :; Simple adjustment method
EN - 19 ENGLISH Adjustment of the image from the computer This projector adjusts the format of the video signal supplied from the computer. However, sometimes im-ages are not projected correctly owing to the type of the computer used. When the image from the computer isn ' t projected correctly, pre...
Page 20 - Advanced features; Still; To resume the motion in the image:; Press the STILL button on the remote control again.; Connection; • Only the computers equipped with a USB port are
EN - 20 Advanced features Still To stop the motion in the image temporarily (or to dis-play a still image):Press the STILL button on the remote control.• The image will freeze temporarily. To resume the motion in the image: Press the STILL button on the remote control again. Important: • Do not disp...
Page 21 - To enable the password function:
EN - 21 ENGLISH PASSWORD CONFIRM O K CANCEL MENU ACCESS XGA60 opt. LOCK UNLOCK OK OK PASSWORD O K CANCEL Password function This projector is equipped with the password func-tion that is designed for prevention of wrong operation by children and restriction on operation by other than specifi ed users....
Page 22 - Lamp replacement; Reset of the lamp operation time; Interval of lamp replacement
EN - 22 Lamp replacement 9. Tighten up the screw (a) using a Phillips screwdriver (+) to secure the lamp cover. Reset of the lamp operation time Plug in the power cord, turn on the lamp, and reset the lamp operation time by keep press-ing the , , and POWER buttons on the control panel at the same ti...
Page 23 - Troubleshooting; Problem
EN - 23 ENGLISH Troubleshooting The following offers solutions to some of the common problems you may encounter. We suggest that you consult this chart before contacting your dealer. Images aren't projected on the screen. Problem Power isn't turned on. Images aren't projected on the screen. Images s...
Page 24 - Cause and solution
EN - 24 Troubleshooting (continued) Images aren't projected correctly. Problem Projected images are shaking.Projected images are dis-placed. Projected images are dis-torted. Projected images are dark. Projected images are blurred. White dots are seen on projected images.Black dots are seen on projec...
Page 25 - Others; Maintenance; Cleaning of the projector and the ventilation slots
EN - 25 ENGLISH Others Cause and solution • This air comes out as a result of cooling the inside of the projector. This isn't a product malfunc- tion. • Check that the volume isn't set to low. • The microcomputers inside the projector may be wrongly operating because of noise. Press the POWER button...
Page 26 - Indicators; Normal condition
EN - 26 Indicators POWER STATUS POWER Steady red Steady green Steady green STATUS Off Blinking green Steady green CONDITION Stand-by Lamp stand-by (about 1 minute) The power is on. (Normal condition) NOTE The POWER button cannot be used toswitch between on and off. POWER Steady green or Steady red S...
Page 27 - Specifi cations; Kensington Lock
EN - 27 ENGLISH Specifi cations Type Model Rated power supply Rated input Display Technology Colors Projection lens Light source lamp Picture size PC compatibility Video compatibility Speaker S-video input Video input Audio input Analog RGB input Control connector Outside dimensions Weight Length of...
Page 28 - Replacement part
EN - 28 Connectors 1 R(RED)/C R 2 G(GREEN)/Y 3 B(BLUE)/C B 4 GND 5 GND 6 GND 7 GND 8 GND 9 DDC5V 10 GND 11 GND 12 DDC Data 13 HD/CS 14 VD 15 DDC Clock 1 TXD IN 2 - - 3 - - 4 GND - 5 5V IN 6 CLOCK OUT 7 RXD OUT 8 DATA OUT 1 3 5 2 6 8 1 5 11 6 10 15 61 245 310 100 5 SERIAL (8-pin) pin No. Name I/O COM...
Page 29 - • Some computers aren't compatible with the projec-
EN - 29 ENGLISH TV60, 480i(525i) - 15.73 59.94 1024 x 768 800 x 600 TV50, 576i(625i) - 15.63 50.00 1024 x 768 800 x 600 1080i 60 (1125i 60) - 33.75 60.00 1024 x 576 800 x 450 1080i 50 (1125i 50) - 28.13 50.00 1024 x 576 800 x 450 480p (525p) - 31.47 59.94 1024 x 768 800 x 600 576p (625p) - 31.25 50....
Page 30 - MITSUBISHI Projector Contact Information; Manufactured by Mitsubishi Electric Corporation; MITSUBISHI ELECTRIC CORPORATION
North America MESCA (Mitsubishi Electric Sales Canada Inc.)http://www.mitsubishielectric.caInformation Technologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2, CanadaSales Phone :+1-(905) 475-7728 Fax :+1-(905) 475-7958 E-mail :[email protected] Technical Phone :+1-(905) 475-77...
