Page 2 - INFORMATION; CLASS I EQUIPMENT
INFORMATION This Class A digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. MEDICAL EQUIPMENTWITH RESPECT TO ELECTRIC SHOCK, FIRE AND MECHANICALHAZARDS ONLY IN ACCORDANCE WITH UL 2601-1 AND CAN/CSAC22.2 NO. 60601.1.57RF ...
Page 3 - CAUTION; RISK OF ELECTRIC SHOCK; TO REDUCE THE RISK OF ELECTRIC SHOCK,
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within anequilateral triangle, is intended to alert the ...
Page 4 - PRECAUTIONS; CONTENTS
1 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS CONTENTS Contents ................................................................................................ 1 Safety precautions ................................................................................ 2-4 Spec...
Page 5 - SAFETY PRECAUTIONS; PROTECTIVE MEASURES
2 SAFETY PRECAUTIONS In the interest of safety, please observe the following precautions: POWER REQUIREMENT This product is designed for operation on 120V AC or 220-240V AC 50/60Hz. Never connect to any outlet or power supplyhaving a different voltage or frequency. WARNING: THIS APPARATUS MUST BE GR...
Page 6 - INSTALLATION LOCATIONS; FOR LONG OPERATING LIFE
3 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS INSTALLATION LOCATIONS MAINTAIN GOOD VENTILATION Ventilation slots and holes are provided on the rear, sides and bottom of this unit. Place the unit on a hard and level surface andlocate at least 4 inches (10 cm) from walls t...
Page 7 - OTHER CAUTIONS; CONNECTING DEVICES; SAFETY CHECKS
4 OTHER CAUTIONS Dust or other foreign matter adhering to the print paper or the sheet cartridge, or deformation resulting from exposure toextremely low or high temperatures could cause loss of color, uneven color or lines, or wrinkles in the print images. NOTE:MEMORIZED IMAGES ARE STORED IN VOLATIL...
Page 8 - PRINT SIZES ARE AVAILABLE DEPENDING ON INK SHEET; HIGH QUALITY PRINTING; SPECIAL FEATURES
5 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS SPECIAL FEATURES 2 PRINT SIZES ARE AVAILABLE DEPENDING ON INK SHEET 2 printing sizes, L size (max.110 x 162 mm) and S size (max.110 x 105 mm), are selectable. HIGH SPEED PRINTING Printing speed is approx. 12 seconds (in S siz...
Page 9 - Open the top of the box.; UNPACKING; Take the unit out of the box carefully.; Remove the cushion with contents.
6 UNPACKING Take the unit out of the box by the following procedures. Make sure to check the contents. 1 1 1 1 1 Open the top of the box. UNPACKING COLO UR V IDEO COP Y PR OCE SSO R 4 4 4 4 4 Unwrap the packing. 3 3 3 3 3 Take the unit out of the box carefully. Make sure to keep the unit horizontal....
Page 10 - FRONT PANEL
7 CONNECTIONS FEA TURES PREP ARA TION OTHERS TROUBLE- SHOOTING PRECAUTIONS FEATURES & FUNCTIONS FRONT PANEL FEED&CUT RESET COPY 1 2345 6 7 8 A 9 B C 1 1 1 1 1 POWER BUTTON(INDICATOR) Press to turn on power. Press again to turn off power.When the power is turned on, the indicator illuminates....
Page 11 - REAR PANEL
8 REAR PANEL 1 1 1 1 1 REMOTE TERMINAL Terminal connection for service remote only.This terminal is to be used by qualified service personnelonly. 2 2 2 2 2 MODE SWITCHES Used to set the various functions of this unit. See page10. 3 3 3 3 3 USB CABLE CLAMPER Use this clamper so that the USB port is ...
Page 12 - CONNECTIONS; CONNECTION WITH USB INTERFACE; CONNECTING WITH PC
9 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS CONNECTIONS CONNECTION WITH USB INTERFACE 2 2 2 2 2 CONNECTING WITH PC Connect this unit with a personal computer as following example. AC LINE REMOTE USB OFF ON 8 7 6 5 4 3 2 1 To USB port Personal computer Printer To USB po...
Page 13 - SETTING MODE SWITCHES
10 SETTING MODE SWITCHES CONNECTIONS 2 2 2 2 2 SETTING MODE SWITCHES Set the mode switches on the rear panel according to the equipment connected.All the switches are set to OFF as shown right when shipped from the factory.Turn off the power when changing the mode switch settings. With the switch No...
Page 14 - BEFORE OPERATION; PAPER SHEET SET; UNLOCK THE PRINTING MECHANISM; RELEASING THE PRINTING MECHANISM LOCK; INSTALLATION OF PRINT PAPER; Insert the print paper roller with gear on the left.
11 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS BEFORE OPERATION Before printing,1. Unlock the printing mechanism. (See below)2. Install the print paper and ink cassette. (pages 11-15) 1 2 PAPER SHEET SET Make sure to use the following types of paper sheet and ink sheet s...
Page 15 - Set the other side of roller without gear.; Feed the print paper through the paper outlet.
12 BEFORE OPERATION 2 2 2 2 2 Set the other side of roller without gear. 3 3 3 3 3 Remove the seal, and insert the edge of the print paper right belowthe roller cover with arrow marks towards the front panel. Make sure to insert the paper straight. 4 4 4 4 4 Feed the print paper through the paper ou...
Page 16 - INSTALLATION OF INK SHEET; INSTALLING THE INK SHEET; INSTALLING THE INK CASSETTE
13 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS INSTALLATION OF INK SHEET 2 2 2 2 2 INSTALLING THE INK SHEET Load the ink sheet roll to the ink cassette before inserting the ink cassette into the printer. 1 1 1 1 1 Insert the ink sheet rollers gear into the holes of the i...
Page 17 - The installation of print paper and ink cassette is completed.; Insert the ink cassette with the ink sheet into its compartment.; INSERT THE PRINTING UNIT
14 NOTE • Do not feed the print paper more than 2 times. Doing so will not allow the number of printsindicated on page 11 to be printed. The installation of print paper and ink cassette is completed. NOTE An IC is built in the ink sheet. This is the IC chip, not a battery. This IC can be thrown away...
Page 18 - USAGE AND STORAGE OF PAPER SHEET SET; BEFORE PRINTING; AFTER PRINTING
15 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS USAGE AND STORAGE OF PAPER SHEET SET 2 BEFORE PRINTING • Fingerprints or dust on the paper’s surface may degrade print quality and cause paper jams.Immediately after the paper is replaced, 2 images may be printed with a blan...
Page 19 - INSTALLING PRINTER DRIVER; How to open the ReadMe file
16 INSTALLING PRINTER DRIVER A printer driver is required to print the data from a personal computer connected with this unit. The printer driver for Windows ® is supplied with this unit. Product name CPD900W CPD900N0 Operating conditions Applies for Microsoft ® Windows ® 98 and Windows ® Me Applies...
Page 20 - SHOOTING; TROUBLESHOOTING; INDICATION ON THE FRONT PANEL & COUNTERNEASURES
17 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS TROUBLESHOOTING If for some reason printing is not possible or error occurs during printing, the indicators on the front panel will be lit.In this case, follow the procedure described below. ALARM Causes Countermeasures • Se...
Page 21 - Symptom
18 TROUBLESHOOTING BEFORE CALLING FOR SERVICE 2 Use the following troubleshooting chart to try to resolve any apparent defect in operation. If you are unable to resolve the problem, unplug the power cord and contact your dealer. Symptom Check and Remedy No power Is the power cord plug disconnected f...
Page 22 - OVERCOMING PAPER JAMS
19 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS 1 1 1 1 1 Press OPEN button to pull out the printing mechanism. When it is not working, reset the power. Then try to press OPEN button again. 2 2 2 2 2 Remove the ink cassette with ink sheet. 3 3 3 3 3 Remove the print paper...
Page 23 - Press OPEN button to pull the printing mechanism out.; Clean the rubber roller.; CLEANING
20 CLEANING Cleaning part A small amount of alcohol How to hold tissue paper Cleaner pen (Option) Ink sheet sensor Front panel Rubber roller Cleaning as indicated below will help maintain stable printer operation and extend the printer’s life. Preparations Alcohol (isopropyl alcohol) Tissue paper (F...
Page 24 - OTHERS; SPECIFICATIONS
21 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS SPEC & OPTIONS SPECIFICATIONS Class Digital color printer Model CP900DW Printing method Thermal Dye Sublimation3 colour faces progressive printing (yellow, magenta and cyan) and surface lamination Print quality Dot resol...
Page 25 - Manufactured by Mitsubishi Electric Corporation
Made from recycled paperPRINTED IN JAPAN 871C593A4 Manufactured by Mitsubishi Electric Corporation 1 Zusho Baba, Nagaokakyo-city, Kyoto Japan Mitsubishi Electric Europe B.V. UK BranchTravellers Lane, Hatfield, Herts. AL10 8XB, England, U.K.Phone (0) 1707 276100 FAX (0) 1707 278755 German BranchGotha...
