Mitsubishi Electric Air-Conditioners - Manual
Mitsubishi Electric Air-Conditioners – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – ContEnts; BEFoRE InstallatIon; -1. tHE FolloWInG sHoulD alWaYs BE oBsERVED FoR saFEtY; CAUTION; Required tools for Installation; WARNING
- Page 3 – outdoor unit installation; IMPoRtant notEs
- Page 4 – -1. FIXInG oF InDooR unIt MountInG BRaCKEt; InDooR unIt InstallatIon; HolE PosItIons
- Page 6 – the Drain hose is removed at installation.
- Page 7 – outDooR unIt InstallatIon; Indoor unit connection
FLOOR TYPE AIR CONDITIONERS
MFZ-KJ25VE MFZ-KJ35VE MFZ-KJ50VE MFZ-KJ60VE
English
InstallatIon Manual
For INSTALLER
• When installing multi units, refer to the installation manual of the multi unit for
outdoor unit installation.
note:
These models can be connected to the multi units, except for KJ60.
JG79A867H02_en.indd 1
2014/06/25 13:38:50
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
En-1 ContEnts 1. BEFORE INSTALLATION .................................... 1 2. INDOOR UNIT INSTALLATION ........................... 3 3. OUTDOOR UNIT INSTALLATION .......................6 4. PURGING PROCEDURES, LEAK TEST, AND TEST RUN ........................................................... 7 5. ...
En-2 Indoor unit Wall hole sleeve (C) Cut off the extra length. Pipe fixing band (E) Wall hole cover (D) Seal the wall hole gap with putty (H). Fix the pipe to wall with pipe fixing band (E). Fixing screw (F) 1-3. sPECIFICatIons 1-4. INSTALLATION DIAGRAM aCCEssoRIEs Check the following parts before ...
En-3 Wall Outdoor side 2-2. HolE DRIllInG 1) Determine the wall hole position. 2) Drill a dia. 65 mm hole (dia. 75 mm for KJ50/60). The outdoor side should be 5 to 7 mm lower than the indoor side. 3) Insert wall hole sleeve (C). 2-1. FIXInG oF InDooR unIt MountInG BRaCKEt • Find a structural materia...
