Milwaukee 5460- User Manual
Milwaukee 5460– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Polishing Pads (Fig. 1)
MILWAUKEE
Polishing Pads are available in two different
materials. 100% Lambswool Pads are ideal for compounding
on non-clearcoat finishes. Wool/Polyester blend Pads are
softer, making them acceptable for clearcoat finishes. Refer
to the chart below to select the proper Pad for your applica-
tion.
1. To
install
Polishing Pads, unplug the tool and place it on
its tool rest with the spindle upright.
2. Make sure the washer flange and spindle washer are
installed on spindle. Then, slide the disc nut through the arbor
hole in both the Polishing Pad and the rubber backing pad,
making sure to spread the fibers in the Pad so the disc nut seats
on pad backing.
3. Push in the spindle lock button (located on left side of gear
case) and simultaneously screw the disc nut & Polishing Pad
assembly clockwise onto the spindle. Securely hand-tighten
the disc nut and Polishing Pad.
4. To
remove
the
Polishing Pad, push in the
spindle lock button and
turn the disc nut counter-
clockwise to unscrew the
assembly.
(Continued on next page)
Milwaukee Tool
Heavy-Duty Polishers
Model Numbers: 5455, 5535, 5460, 5540
Operating Instructions
Page 1
RenTrain INC
RenTrain INC
To reduce the risk of injury, always unplug tool
before attaching or removing accessories. Use
only specifically recommended accessories.
Others may be hazardous.
WARNING!
ASSEMBLY
Fig. 1
1.
2.
3.
4.
5.
6.
7.
8.
49-36-2500
(7”)
Compounding
Compounding
High Gloss
Finishing
Backing
Pad
P o l i s h i n g P a d
Pad
Size
Pile
Depth
Application
Recommended
Surface
49-36-1450 100% Wool
49-36-1455 100% Wool
49-36-0500 100% Wool/Poly.
49-36-1160 100% Wool
49-36-0700 100% Wool/Poly.
Paints, clearcoats &
fiberglass
Paints & clearcoats
49-36-2200
(7”)
Paints, clearcoats &
fiberglass
Paints & clearcoats
Compounding
High Gloss
Finishing
7-1/2”
7”
7-1/2”
1-1/2”
2”
1-1/2”
1-1/2”
1-1/2”
9”
9”
1. Arbor hole
2. Disc nut
3. Polishing pad
4. Rubber backing pad
5. Spindle washer
6. Washer flange
7. Spindle
8. Tool rest
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
