Milwaukee 2682-20 - Manual
Milwaukee 2682-20 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS.
- Page 3 – MILWAUKEE
- Page 4 – WARNING
- Page 5 – LIMITED WARRANTY - USA AND CANADA
- Page 6 – LIRE TOUTES LES RÈGLES ET INSTRUCTIONS DE SÉCURITÉ.
- Page 7 – Ne recharger la
- Page 10 – Procédure pour assurer la validité de la garantie; GARANTIE LIMITÉE – MEXIQUE, AMÉRIQUE CENTRALE ET CARAÏBES
- Page 13 – APPLICACIONES; A D V E RT E N C I A
- Page 14 – MANTENIMIENTO; ACCESORIOS
- Page 15 – MILWAUKEE ELECTRIC TOOL CORPORATION; UNITED STATES; MILWAUKEE Service; CANADA; CENTRO DE ATENCIÓN A CLIENTES; MEXICO; - Soporte de Servicio MILWAUKEE; Registre su herramienta en línea, en
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.
M18™ CORDLESS 5-3/8" METAL SAW
135 mm (5-3/8") SCIE À MÉTAUX M18™
SIERRA PARA CORTAR METAL, 135 mm (5-3/8") DE M18™
Cat. No.
No de cat.
2682-20
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Milwaukee 2682-20
Summary
2 3 PERSONAL SAFETY GENERAL POWER TOOL SAFETY WARNINGS WORK AREA SAFETY ELECTRICAL SAFETY • Keep work area clean and well lit. Cluttered or dark areas invite accidents. • Do not operate power tools in explosive atmo- spheres, such as in the presence of fl ammable liquids, gases or dust. Power tools ...
4 5 SYMBOLOGY SPECIFICATIONS ASSEMBLY WARNING Recharge only with the charger specifi ed for the battery. For spe- cifi c charging instructions, read the operator’s manual supplied with your charger and battery. Inserting/Removing the Battery To remove the battery, push in the release buttons and pul...
6 7 OPERATION WARNING To reduce the risk of injury, wear safety goggles or glasses with side shields. Causes and Operator Prevention of KICK-BACK: KICKBACK is a sudden reaction to a pinched, bound or misaligned saw blade, causing an un-controlled saw to lift up and out of the workpiece toward the op...