Milwaukee 2458-20 - Manual
Milwaukee 2458-20 Nailer – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – MILWAUKEE; READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS.
- Page 3 – LIMITED WARRANTY - USA AND CANADA
- Page 4 – LIRE TOUTES LES RÈGLES ET INSTRUCTIONS DE SÉCURITÉ.
- Page 8 – PÓLIZA DE GARANTÍA - VALIDA SOLO PARA MÉXICO,
- Page 9 – MILWAUKEE ELECTRIC TOOL CORPORATION; UNITED STATES; MILWAUKEE Service; CANADA; CENTRO DE ATENCIÓN A CLIENTES; MEXICO; - Soporte de Servicio; Registre su herramienta en línea, en
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
Cat. No.
No de Cat.
2458-20
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.
M12™ PALM NAILER
CLOUEUSE PORTATIVE M12™
CLAVADORA DE MANO M12™
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Milwaukee 2458-20
Summary
2 3 Cat. No. Volts DC Blows per Minute Nail Capacity Min. Head Size 2458-20 12 2700 6d-16d 0.200" SPECIFICATIONS SYMBOLOGY ASSEMBLY WARNING Recharge only with the charger specifi ed for the battery. For specifi c charging instructions, read the operator’s man-ual supplied with your charger and b...
4 5 Operation 1. Insert a nail head into the mag- netic sleeve. Note: To avoid jams, only use nails with a head diameter greater that 0.200". Do not use nails with broken heads. 2. Place the tip of the nail against the workpiece. 3. Press the trigger button and apply pressure to start the ham-me...
6 7 pièces métalliques exposées de l’outil et peut électrocuter l’utilisateur. •Garder les mains à l’écart des pièces en mou- vement et des pièces de fi xation. • Au moment d’utiliser l’outil, s’assurer que la douille de serrage et le manchon magnétique fonctionnent normalement. Ne pas retirer, modi...
