Miller XR Python- User Manual
Miller XR Python– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Front Panel
- Page 3 – Water Coolant Systems
- Page 4 – Ordering Information; Recommended Power Sources
Processes
MIG (GMAW) Welding
Pulsed MIG (GMAW-P) with
pulsing power source
Input Power
24 VAC, 50/60 or 100 Hz
Dimensions
H: 16 in (406 mm)
W: 9-1/4 in (235 mm)
D: 21-1/4 in (540 mm)
Wire Speed
70 – 900 IPM (1.8 – 23 m/min)
(Dependent on gun used)
Weight
38 lb (17.2 kg)
Heavy Industrial Applications
Emergency Vehicles
Shipbuilding
Recreational Vehicles
Tool Boxes
Trucks and Trailers
Railcars
Heat Exchangers
Fabrication
Sign Manufacturers
Quick
Specs
XR
™
-Control Feeder
Push-Pull Control
Push-Pull
Wire Feed System
Issued November 2007 • Index No. M/1.7
The Power of Blue
®
.
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Web Site
www.MillerWelds.com
International Headquarters
Phone: 920 -735-4505
USA FAX: 920 -735-4134
Canadian FAX: 920-735-4169
International FAX: 920 -735-4125
Wire feeder is warranted for 3 years, parts and labor.
Guns are warranted for 1 year.
Push-pull design
feeder motor
provides continuous push
force to the wire while the gun
motor controls wire feed
speed at the arc, together
providing accurate and
positive wire feed speed over
long distances (up to 35 ft).
Unique arc starting control
can
be adjusted to tune arc starting,
reducing wire stubbing or arc
flaring which can result in
burnbacks to the contact tip.
Wire jog control
allows wire to
be threaded through gun cable
without energizing weld output.
Preflow/Postflow factory preset
times:
0.5 second preflow,
3.5 second postflow (unit arrives
with default setting: preflow off,
postflow on).
Control shown with optional voltage control,
gas flowmeter, and dual schedule control.
Master/gun wire feed speed
control
improves resolution by
limiting speed range available
at the gun, making it easier to
fine-tune arc conditions.
Trigger hold
reduces fatigue by
allowing operator to weld without
holding trigger.
Unique
solid-state control
permits XR systems to work
with most CC, CV, or CC/CV,
DC welding power sources.
Digital display
indicates wire
feed speed or weld voltage.
Allows you to switch between
wire feed speed and voltage
display.
A Complete System Consists of
the Following:
XR-Control with recommended
14-pin Miller power source
(see page 4)
XR Push-pull gun
XR-Control Drive Rolls
The
XR
™
-Control
and new
XR-Aluma-Pro
™
gun combine
with the
XMT 350 MPa
to
make a great Pulsed MIG
system. Welding aluminum
has never been easier.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 XR-Control Panel Input Power 24 VAC, 50/60 or 100 Hz Wire Speed 70 – 900 IPM (1.8 – 23 m/min)(Dependent on gun used) Maximum Spool Size Capacity 12 in (305 mm) Net Weight 38 lb (17.2 kg) Dimensions H: 16 in (406 mm)W: 9-1/4 in (235 mm)D: 21-1/4 in (540 mm) XR-Control Specifications (Subject to cha...
3 XR-Control Genuine Miller Options *Factory option available only in XR-Control packages— see Ordering Information on page 4. Voltage Control*#194 027 Field Allows voltageadjustment at thecurrent XR-Controlwhen used with Millerelectrically controlled, constant-voltage DC power sources thathave a 14...
Litho in USA Distributed by: Equipment Stock No. Description Qty. Price Important: The XR-Control and specific type and length gun must be ordered separately. Also order proper Drive Roll Kit below for the size wire being used. XR ™ -Control #181 538 Standard model w/digital display #181 538-01-1 St...
